Search results for: "Houston County, Georgia"

The C-17 Program Management Office has a requirement that is for a firm-fixed price contract for NSN: 5120-01-260-3722, Adapter, Mechanical Puller, P/N PWA80158, which includes one First Article, one First Article Test Plan, and one First Article Test Report. The Puller Adapter will be used to facilitate removal of the starter drive seal face rotating ring. It will provide protection and jacking surface for the starter drive face seal rotating ring removal. A means of removal is required at the intermediate and depot levels of maintenance of the gearbox starter drive seal face rotating ring from the F117-PW-100 gear box assembly. Delivery is FOB Destination with shipments in the continental United States. This requirement is solicited as a ...

Operationalize Air Conditioning Unit ACU-804-MIL1.0 DESCRIPTION: Teardown, inspect, determine, and supply components/consumables to repair, service, and make operational air conditioning (AC) unit located at Al-Mubarak Air Base Kuwait. The AC unit is beyond field level maintenance and requires depot level repair expertise. The AC Unit has been previous inspected and it was determined the compressor requires replacement, however, a new assessment to make AC Unit operational is required.2.0 Contractor shall assess and determine requirements to make operational the following equipment:ITEM PART NUMBER DESCRIPTION QTY0002 ACU-804-MIL Air Conditioning Unit Serial No. T32157 12.1 Contractor shall include but not limited to teardown, inspect, and ...

This is a brand name requirement as a competitive small business set aside for the contractor to purchase Carrier Chillers for 78th CEOER; at Robins Air Force Base (AFB) Georgia. The CE personal will be responsible for installation of the Carrier Chillers.

The Contractor shall provide labor, tools, materials, parts, equipment, travel, and training as necessary toprovide the on-site Balancing Station Maintenance to perform preventative maintenance for two (2) each BTIbalance station assets (station/model # 13376/VNR-500-STD-C130J and 13382/VNR-2500-Heavy-C130J/Robins Asset Nos in sequential order: WR006100 and WR006133) which shall include the necessaryevaluation, parts, calibration certification, documentation, marking/labeling, and technical support. Also, theContractor shall include add-on parts which include an associated set of calibration weights with certificate {setincludes a variation of five (5) weights}.Solicitation FA857124Q0075 is issued as a request for quotation (RFQ). This is a...

*100% Total Small Business Set-Aside*The C-17 Program Management Office has a requirement that is for a firm-fixed price contract for four (4) each NSN: 1730-01-534-6421, Towbar, Aircraft, P/N 17G013043-501, which includes one First Article, one First Article Test Plan, and one First Article Test Report.Towing or pushing the C-17 aircraft, either forward or backward, is normally accomplished through the nose landing gear (NLG). The NLG incorporates a tow lug design similar to the lug on the KC-10 and having design maximum allowable torsional load of 273,000 in-lbs and maximum axial load of 90,000 lbs. A means is required at the organizational and depot levels of maintenance to interface between the NLG tow lug and the tow tractor while towi...

The Support Equipment and Vehicles Division at Robins AFB, GA (AFLCMC/WNZ) has a requirement for a 5-year, Fixed Price Incentive Firm Target (FPIF)/Firm Fixed Price (FFP) Indefinite Delivery/ Requirements-type contract for support of the 60K Tunner Aircraft Cargo Loader. The Tunner is a self-propelled 60,000-pound capacity aircraft cargo transporter loader. The Tunner weighs 66,000 pounds; is approximately 15 feet wide by 50 feet long; and is approximately 22 feet tall when fully extended. It transfers loads to and from warehouses, and to and from cargo aircraft on the flightline. The Tunner interfaces with docks in warehouses and all Air Force cargo aircraft, including many commercial Civil Reserve Air Fleet (CRAF) aircraft. The Tunner's p...

Sources Sought:1 Oscillator, Non-Crystal – NSN: 5955-01-172-4865 / PN 435282-12 Oscillator, Non-Crystal – NSN: 5955-01-172-4866 / PN 435283-13 Oscillator, Non-Crystal – NSN: 5955-01-172-4867 / PN 435300-14 YIG Reject Filter with Driver – NSN: 5915-01-174-3143 / PN 435265-15 YIG Reject Filter with Driver – NSN: 5915-01-174-3144 / PN 435265-26 YIG Reject Filter with Driver – NSN: 5915-01-174-3145 / PN 435265-37 YIG Band Pass Filter – NSN: 5915-01-195-1904 / PN 435418-18 YIG Band Pass Filter – NSN: 5915-01-195-1905 / PN 435418-2SUBJECT:Market research is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for repair of the above listed NSNs.ITEM DESCRIPTION:The pur...