Search results for: ada and traction power

Project: C22RI102826940 Invitation for Bids (IFB) - Congress Line - Phase One - Racine Station ADA and Traction Power Improvements Ref. #: C22RI102826940 Department: Construction Type: IFB Status: Open Open Date: Sep 26th 2022, 8:00 AM CDT Questions Due Date: Oct 17th 2022, 4:30 PM CDT Close Date: Dec 6th 2022, 2:00 PM CST Days Left: < 1 Project Description:C22RI102826940 IFB for Congress Line - Phase One - Racine Station ADA and Traction Power Improvements

. § 661.12, for the procurement of rolling stock (including train control, communication, and traction power equipment) use the following certifications: Certificate of Compliance with Buy America Rolling Stock Requirements The bidder or offeror hereby certifies that it will comply with the requirements of 49 U.S.C. 5323(j), and the applicable regulations of 49 C.F.R. § 661.11.

Panels shall provide a high degree of electrical isolation so as to both avoid shunting of signal system track circuits and deter traction power currents from straying from the rails and heading to ground. 5. Rubber modules shall be resistant to extremes weather such as can be expected at the project site, including ultraviolet light, and resistant to common roadway de-icing chemicals. 6.

Rolling stock includes: buses, other vehicles used in transportation, train control equipment, communication equipment, and traction power equipment. Effective July 24, 1995 small purchases (under the $100,000 threshold) made with FTA funds, will not be subject to the Buy America requirement. The value of small purchases should be determined by using "contract price" and not "unit price".

The equipment shall have been designed and built exclusively for pavement milling operations and shall have sufficient power, traction, and stability to accurately maintain depth of cut and slope. The milling machine shall be equipped with a grade control system, which will automatically control the longitudinal profile and cross Asphalt Patching & Pavement Repair 274-TFS-6-20 PSP-14 slope of the pavement surface.

The equipment shall have been designed and built exclusively for pavement milling operations and shall have sufficient power, traction, and stability to accurately maintain depth of cut and slope. The milling machine shall be equipped with a grade control system, which will automatically control the longitudinal profile and cross ANNUAL RESURFACING 274-TFS-1-20 PSP-14 slope of the pavement surface.

Milling machines shall be power operated, self-propelled machines capable of removing the desired thickness of existing surfaces. The machines shall have sufficient power, traction and stability to accurately maintain depth of cut and slope.