SCIENCE & TECHNOLOGY SINGLE ENGINE AIRCRAFT to the University, in accordance with the specifications contained in this RFP.

Repair Aircraft Fire trainer facility. For all specifications and requirements please see attached SOW. Site Visit will be Thursday the 16th @1000. You will be signed on at the West Gate Visitor Center. 21 June 2022 - Revision 1 of the Combo and SOW have been attached and the close date has been extended to the 28th of June.

The USAF is looking to establish a 10-year contract for the sustainment of Aircraft Engine Test Stands. The Engine Test Stand (ETS) system has two different top-level configurations: the T-20 and the T-21 series.

Contractor will provide all new OEM materials, supervision, labor, and the necessary equipment to repair 52 Aircraft Sunshades manufactured by Big Top Shelters (52 each 82’ x 58’ x 28’ shelters) located at Moody AFB, GA. Ordering period is for 5 years. All questions are due by 17 June 2022 at 1:00 PM EST. Please see attached Solicitation and Statement of Work for more information.

The aircraft portable wash rack system the USCG is requesting shall include the following: Portable containment system capable of collecting all the wash water generated from the aircraft wash, engine wash, or any applicable aircraft component washed on the system Integrated walls to assist in the containment of the wash water without inhibiting the ability to move the aircraft on and off the structure Independent aircraft wash system with at least

. *** Product Service Code:- 1560 - AIRFRAME STRUCTURAL COMPONENTS NAICS Code:- 336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing Primary point of contact:- Robert Westerman Robert.Westerman.4@us.af.mil Secondary point of contact:-

Back to List State of Iowa Bid Opportunities Bid Information Bid Number RFP222590003 Solicitation Aircraft reinstallation design plan Solicitation Type Request for Proposals County Polk Description Description The State Historical Museum of Iowa invites qualified applicants to submit a letter of interest and proof of qualifications to be considered for designing a suspended display method for historic aircraft in the State Historical Building atrium

The contractor shall provide all necessary labor, transportation, equipment, tools, and materials to purchase, deliver, and install high bay, flood, and wall pack lighting fixtures in the Aircraft Shelters for Buildings #3111 through 3114. This scope of work is intended to be a general description of the work to be accomplished within the associated area of work.

(ii) If known, the manufacturer name for all aircraft components under Federal Supply Group (FSG) 16 or 17 and FSCs 2620, 2810, 2915, 2925, 2935, 2945, 2995, 4920, 5821, 5826, 5841, 6340, and 6615. (iii) The manufacturer name, make, model number, model year, and serial number for all aircraft under FSCs 1510 and 1520. (iv) Appropriate Federal Condition Codes.