Bid #2205-002-WL - Aluminum and Rubber boats for TCSO IFB Bid contact:Please log in to view Bid contact informationIssuing agency:Travis County, TXSee other Bids by this agencyClassification codes: View classification codesContract duration:One Time PurchaseContract renewal:Not ApplicablePrices good for:60 daysRegions:Texas, Travis Standard disclaimer Please log in to see Bid details or to add this to My Bids.
For background, the following information is provided: Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin.
deliver molded rubber and cold shrink products for the Electric Utility.
Outboard motor shall be equipped with stainless steel propeller.
LATCHES - RECESSED LIDS - ALUMINUM HINGES AND RUBBER GASKETS - ALUMINUM HANDLE WELDED TO TOP OF LID - (1) 2" MESH COVERED HOLE IN LID FOR VENTILATION - (1) 6" ID MALE CAMLOCK ENDS - (1) 8" x 8" SLIDING GATE BY 6" CAMLOCK END - (1) 6" DUST CAPS - 3/4" ID HOLE IN TOP OF TANK FOR AIR LINE - LIFT RINGS OF MANUFACTURER PREFERENCE AT FOUR TOP CORNERS *FOB Destination: Boone Research Station, 1436 255th St, Boone, IA 50036 on or before February 15th, 2022
LATCHES - RECESSED LIDS - ALUMINUM HINGES AND RUBBER GASKETS - ALUMINUM HANDLE WELDED TO TOP OF LID - (1) 2" MESH COVERED HOLE IN LID FOR VENTILATION - (1) 6" ID MALE CAMLOCK ENDS - (1) 8" x 8" SLIDING GATE BY 6" CAMLOCK END - (1) 6" DUST CAPS - 3/4" ID HOLE IN TOP OF TANK FOR AIR LINE - LIFT RINGS OF MANUFACTURER PREFERENCE AT FOUR TOP CORNERS *FOB Destination: Boone Research Station
Added: Oct 25, 2018 2:40 pm Market Survey for Axis-Symmetric Close-Formed 2014 Aluminum Alloy Forgings -- M1 Abrams Tank Aluminum Road Wheel "Blanks" The purpose of this Market Survey is to obtain information on available vendors, lead times, and production and shipping capabilities for forged and machined aluminum M1 Abrams Tank road wheel "blanks" (cores).
6.9 MISCELLANEOUS Comply Comply 6.9.1 The top side rails and tailgate to have 3/8 inverted angle on top for _______ _______ self-cleaning instead of wooden side boards 6.9.2 Body to have a 10 inch bolt on removable apron _______ _______ 6.9.3 Tailgate banjo’s to be 1⁄2 inch 6061 material _______ _______ 6.9.4 All steel parts contacting the aluminum must be stainless steel _______ _______ 6.9.5 Rear control rod to be 1 1⁄4 inch stainless steel, pillar
Rows: four (4) aluminum seating surfaces and 21’ (feet) in width. Four rows of 21' wide plank type seating. No bucket seats. b. Bleachers shall be capable of being moved by tipping and rolling on swivel casters with non-marring rubber wheels. c. Bleachers shall be 100% welded aluminum angle frames. d. Bleachers shall have double foot planks. e. Bleachers shall have the first seating surface to be 12” (inches) off the ground. f.