The NAICS code for this order is 332410 Power Boiler and Heat Exchanger Manufacturing; PSC is 4420 Heat Exchangers and Steam Condensers, with a business size standard of 750 employees.This supply requirement is for the design, fabrication, and delivery for two (2) thrust bearing oil cooling coils to Canyon Ferry Power Plant, Helena, Lewis and Clark County, Montana.
THRUST BEARING OIL COOLING COIL FOR CANYON FERRY POWER PLANT: The Bureau of Reclamation, Missouri Basin Region, anticipates awarding a purchase order for the design, fabrication and delivery of one thrust bearing oil cooling coil to the Canyon Ferry Power Plant, located approximately 18 miles East of Helena Montana. The new oil cooling coil is not required to be installed as part of this purchase order.
THRUST BEARING OIL COOLING COIL FOR CANYON FERRY POWER PLANT Solicitation ID/Procurement Identifier: 140R6021Q0003 Ultimate Completion Date: Fri Apr 23 17:00:00 GMT 2021
PR Number(s): FD20302200102PLNLine Item: 0001NSN: 2840009668035RV SUMP,OIL,AIRCRAFT GP/N: 490742, Description: Used for the cooling of the bearing and the transfer of oil back to the gear boxSupp. Description: AMS 5613 stainless steelBest Estimated Qty: 29.0000 EADelivery: 01 JUN 2023 On or Before Destn: SW3211,, , - . Quantity: 8.00 Unit of Issue: EADelivery: 01 JUL 2023 On or Before Destn: SW3211,, , - .
This is a requirement that is competitive, but limited by data rights. THE RIGHTS TO USE THE DATA NEEDED TO PURCHASE THIS PART FROM ADDITIONAL SOURCE(S) ARE NOT OWNED BY THE GOVERNMENT ANDCANNOT BE PURCHASED, DEVELOPED OR OTHERWISE OBTAINED.DRAWING 490742 HAS LIMITED RIGHTS IN JEDMICS AS OF 10/APRIL/2020.
Nomenclature/Noun: F118 Oil Lubricating Tank Remanufacture 5. NSN: 2840-01-297-1536LR Part Number: 7101M43G05 6. Application: B-2 7. Description: The F118 Lubricating Oil tank stores oil for a wide range of flight conditions. The tank is also used to provide de-aeration, air venting, and auxiliary oil supply to the No. 3 bearing, lubricating and cooling engine main bearings, oil seals and accessories.
Liquid oil cooling/lube shall not be used.The high activity blower/motor assembly will process nitrogen/argon gas based on an inlet temperature of 20-30 deg C.Each blower/motor assembly shall have a flow rate between 100-140 SCFM and a Differential Pressure of approximately 5.5 PSIG.Each blower/motor assembly shall be hermetically sealed or shall have a Leak Rate of 0.1 PSIG change over 10 minutes at 50 PSIG.Each motor shall be TEFC rated.Motor shall
