Search results for: burst-mode laser system

Notice Type: Sources SoughtTitle: Burst-Mode Laser SystemNotice ID: N00173-22-RFI-EN05Response Date: 31 Aug 2022Interested Vendors List: YesOriginal/Update Set Aside: N/ANAICS: 334515 – Burst-Mode Laser SystemPlace of Performance: Naval Research Laboratory (NRL) in Washington, DC.DESCRIPTION:The Naval Research Laboratory is searching for potential sources that are capable of meeting the requirement described in the attached draft Specifications for

The Space Development Agency is considering a revision to its Optical Communication Terminal (OCT) standard to support low data rate links, and long-range links, specifically space-to-space (S2S) geometries of low Earth orbit (LEO) to medium Earth orbit (MEO) (L2M) and low earth orbit (LEO) to geosynchronous Earth orbit (GEO) (L2G) ranges. This RFI specifically seeks industry feedback on this modification and industry’s ability to support production of compliant OCTs. See the attachment for details.

Burst-Mode Wavelength-Agile Laser System Programmable DC Power Supply. This purchase is exempt from the usual selection processes of the Procurement Code because the procurement expenditure is for performing sponsored research and other sponsored activities under grants and contracts funded by the sponsor or by sources other than State appropriations. (30 ILCS 500 / 1-13(b)(8)) .

Using a 1 M solution of nitric acid in water, average drop mass will be measured using the burst-mode gravimetric method (Anal. Chem. (2009) 81,8577) under a stable waveform and reservoir pressure. For each nozzle, this test will be repeated five times within 30 minutes using a script.

) Burst Mode: 1, 2, or 3 pulses per burst (selectable) Spot Size: 8 microns Cone Angle: 16 degrees Posterior Offset: 0-350 microns (continuously variable) Repetition rate: 3 Hz (in a single burst) Pulse Rate: NA Aiming Beam: Red Diode, continousely variable adjustable intensity Cooling: Air Cooled Electrical Requirements: 100-240 VAC, 50/60 Hz, 3.15 Amps CDRH classification: FDA lllbSelective Laser Trabeculoplasty Mode Laser Source: Q-Switched Frequency

Sensors shall have the capability to sample in continuous and burst mode and be capable of sampling at 1, 2, 4, 8, and 16Hz.  Each sensor must be capable of burst intervals of up to 24 hrs.  The RBR Solo Wave Sensor are compact (less than 10” in length and 2” in diameter).  They have an internal power supply and the sensor have enough memory to store up to 20 million data points between downloads. 

Classification: FDA IIIbYAG Mode Specifications:Laser Source: Q-switched Nd:YAGWavelength: 1064 nmEnergy: 0.3mJ-10mJ per pulsePulse duration: 3ns (nanoseconds)Burst Mode: 1, 2, or 3 pulses per burst (selectable)Spot Size: 8 micronsCone Angle: 16 degreesPosterior Offset: 0-350 microns (continuously variable)Repetition Rate: 3Hz (in single burst)Aiming Beam: Red Diode, continuously variable adjustable intensityCooling: Air CooledElectrical Requirements