Search results for: chilled water control valve

Contractor shall provide labor and material to install new 0-10 VDC chilled water control valve, connect chilled water valve lines from the isolation valve to the unit, connect drain line, and insulate newly installed line with Armaflex insulation. Contractor shall provide labor to leak check, start and test valve for proper operation. Upon completion contractor will contact COR (Gustavo Flores) to inform him of the completion of service.

The selected Contractor will be required to deliver the Work and Services described in the procurement documents including, but is not necessarily limited to, the supply of labour, material, supervision and equipment necessary to remove a low pressure 320-tons centrifugal chiller #2, R123, SUVA to be replaced with a new state of the art magnetic unit including the addition of VFD and two (2) new automated chilled water control valves inside the central

The existing chilled water control valve serving AHU-72A shall be replaced under Base Bid. Project duration shall be 240 calendar days from NTP issuance for the Base Bid work.

Title: Chilled Water Loop Control Valves Delivery Location: Larimer County, CO, USA Due: 01/16/2018

PROVIDE ALL LABOR, SUPERVISION, MATERIALS, AND EQUIPMENT NECESSARY TO TWO FAILED CHILLED WATER CONTROL VALVES AND ELECTRIC ACTUATORS ON CHILLER #1 LOCATED AT 650 CAPITOL MALL, SACRAMENTO, CA 95814 Solicitation ID/Procurement Identifier: 47PK0221A0003 Ultimate Completion Date: Mon Sep 18 17:00:00 GMT 2023

Provide collars and adapters as required. 2- Provide Unit with Chilled Water Control Valve 3- Provide Unit with standard Factory controller and LCD Display 4- Provide Unit with Disconnect Switch., 1, EA;LI 002: Computer Room AC Unit, Model Number- MMD91CDM006A, Manufacturer Libert Coporation.

A new chiller is to be provided along with new pumps, piping, cooling towers, etc. .2 Work will also comprise of the installation of new controls for the chiller plant along with controls for existing air handlers in the hospital. .3 Air dampers and chilled water control valves will be replaced on the above noted air handlers. .4 Refer to other sections in this project manual. .5 Refer to project drawings.