Search results for: clean and paint building

Please note the solicitation closing date has been extended from 09 June 2020 to 10 June 2020 by 4PM Central Time.Clean and Paint the area in Building 299 known as "Old Paint Area". Painting will include the prepration of surfaces, priming, painting and appropriate column labeling. Total approximate square footage of surface area is approximately 19,200 square feet with approximately 35 columns to be painted.

Mobilize on site, treat with a chlorinated bleach and water mixture to kill mildew, mold spores or any other surface contaminants, pressure wash surface, caulk windows and doors, surfaces to be painted may be rolled, brushed, sprayed or bac ......Show More

Award Notice.

Bid Information TypeCompetitive Sealed Bid StatusIssued NumberRFQ1252-20-01 (Clean & paint I-beams in salt building - Wyandot County) Issue Date & Time6/28/2019 03:17:03 PM (ET) Close Date & Time7/12/2019 04:00:00 PM (ET) Time Left11 hours 54 minutes 21 seconds NotesClean & paint I-beams on a salt building located at the ODOT Wyandot County garage address 10976 CR 121, Upper Sandusky, OH 43351.

Bid Information TypeCompetitive Sealed Bid StatusIssued NumberRFQ1250-20-01 (Clean & paint I-beams in salt building - Van Wert County) Issue Date & Time6/28/2019 03:13:30 PM (ET) Close Date & Time7/12/2019 04:00:00 PM (ET) Time Left11 hours 53 minutes 42 seconds NotesClean & paint I-beams on a salt building located at the ODOT Van Wert County garage address 10238 Van Wert/Decatur Road, Van Wert, OH 45891.

Contractor will clean and prepare building exterior for paint application per manufacturer specifications: a. Contractor will thoroughly clean building exterior with a power washer in preparation for painting. After cleaning, treat for any mold or mildew. b. Contractor will caulk, scrape and prepare exterior surfaces where needed in preparation for painting. c.

All exterior wood is faded and dirty. Wood needs cleaning and sealing maintenance. Clean all exterior wood components. Repair where needed. Apply sealant to all exterior wood components. Apply stain as required or desired by owner. Clean painted surfaces, repair siding and trim as needed, prime and paint with long lasting paint or coatings suitable for marine environment.