Laboratory Coats Dry Cleaning Services ***Questions and Answers is attached and the proposal due date has been update. All proposals are due 10:00 a.m. (EDT) on 09/12/2022.
film thickness a minimum of 0.002 in Painting aluminum 6061 components per MIL-PRF-24635 Type V, Class 2, Grade B, color Gray Semigloss (Haze) per FED-STD-595, two coats dry film thickness 0.003 in. min.
TYPE 2, FOLLOWED BY TWO (2) COATS (1 MIL MINIMUM DRY FILM THICKNESS EACH) OF YELLOW PRIMER CONFORMING TO TT-P-645 WITH THE COLOR NUMBER BEING LEFT UP TO THE MANUFACTURER. ALL PARTS IN CONTACT WITH AIR STREAM ARE TO BE GIVEN A FINAL COAT (1 MIL MDFT) OF PHENOLIC VARNISH IN ACCORDANCE WITH TT-V-119, TO SEAL PRIMER IN THE AIR STREAM. TOTAL THICKNESS OF ALL COATS SHALL BE BETWEEN 3 TO 4 MILS DRY FILM THICKNESS."
Contractor will grind floors with diamond blades for proper, prepping before doing first coat of primmer on floor surface. Contractor will tape plastic to cover equipment to keep from getting over spray. Contractor will apply bonding primer with 2 coats of gray color paint. Contractor will be using Benjamin Moore Insl-x sure step acrylic anti slip paint. Contractor will let all paint coats dry before applying next one.
TYPE 2, FOLLOWED BY TWO (2) COATS (1 MIL MINIMUM DRY FILM THICKNESS EACH) OF YELLOW PRIMER CONFORMING TO TT-P-645 WITH THE COLOR NUMBER BEING LEFT UP TO THE MANUFACTURER. ALL PARTS IN CONTACT WITH AIR STREAM ARE TO BE GIVEN A FINAL COAT (1 MIL MDFT) OF PHENOLIC VARNISH IN ACCORDANCE WITH TT-V-119, TO SEAL PRIMER IN THE AIR STREAM. TOTAL THICKNESS OF ALL COATS SHALL BE BETWEEN 3 TO 4 MILS DRY FILM THICKNESS."
Sealed quotes will be received via the District’s e-Procurement Portal, OpenGov Procurement. Quotes must be submitted by 11:30 amon Friday, April 12, 2024, EST.**NO LATE QUOTES WILL BE ACCEPTED******WORK WILL BE AWARDED TO THE LOWEST QUOTED PRICE ****TimelineQuote Release Date:March 30, 2024Quote Submission Deadline:April 12, 2024, 11:30am
of Spartan Shineline Seal allowing it to adequately dry between coats and per the manufacturer's directions, specifications and recommendations Apply four (4) coats of Spartan iShine 25% High Solids Floor Finish allowing it to adequately dry between coats and per the manufacturers directions, specifications and recommendations Allow the floor finish to adequately dry and burnish all floors with a white pad Clean any dust from walls, window sills,
