Search results for: depth cold milling

Proposal 81000-208388 0.63 mi of hot mix asphalt full depth cold milling and resurfacing, improve gravel shoulder and pavement markings on Sibley Road from M-52 to the city limits of Chelsea, Washtenaw County. This is a Local Agency project. ** 548 Cb **In addition to the above minimum prequalification requirement for prime contractors this project includes a subclassification of Ea.

The general items of work include clearing and grubbing; variable depth cold milling of existing pavement; paving with asphalt rubber hot mix (ARHM) and conventional asphalt concrete; removal and replacement of curb and gutter; adjustment to the grade of manholes and valve covers; installation of traffic striping, marking, raised pavement markers, traffic signs, and curb addresses (house numbers) painting; and miscellaneous appurtenant work.

cold milling asphalt • 3,000 tons of hot mix asphalt • 2,500 linear feet of curb and gutter removal and replacement • 2,400 square yards of sidewalk removal and replacement • 32,000 square yards of turf restoration PROPOSALS TO BE RECEIVED AND PUBLICLY OPENED AND READ AT THE FOLLOWING DATE AND TIME: Wednesday, December 20, 2023 at 2:00 PM Bidders shall review and comply with the Information for Bidders, which is incorporated by reference, and carefully

Cold Milling Full Width and Approach - Shall be completed in accordance with Michigan Department of Transportation 2020 Standard Specifications for Construction Section S01 and all other applicable sections. Depth of Cold Milling shall be 1.5 inches or as noted on the bid. For locations depth of Cold Milling is 3.0 inches the Contractor shall pave back a minimum of 1.5 inches by end of day.

Source Option 48 000 square metres Cold Milling Asphalt Pavement – 50mm Depth 50 000 square metres Cold Milling Asphalt Pavement – 30mm Depth 1 350 tonnes Granular Base Course – Des. 2 Class 25 23 500 tonnes Asphalt Concrete Pavement EPS - Mix Type L1 (PG 52-34) Contractor to supply all materials. Contract Completion Date: October 15, 2024.

Topeka Blvd west to City Limits – Cold Mill & HMA Overlay Provide all labor, materials, equipment and temporary signage and traffic control as necessary to Cold Mill existing asphaltic concrete surface (2” Nom. Depth) and place a 2” Thick mat of Hot- Mix Asphaltic Concrete (BM-2A w/PG70-28) Overlay.

Topeka Blvd west to City Limits Cold Mill & HMA Overlay Provide all labor, materials, equipment and temporary signage and traffic control as necessary to Cold Mill existing asphaltic concrete surface (2 Nom. Depth) and place a 2 Thick mat of Hot-Mix Asphaltic Concrete (BM-2A w/PG70-28) Overlay.