Search results for: dft materials

AMENDMENT 1 - THE DUE TO DATE FOR QUOTES HAS BEEN EXTENDED TO 25 MAY 2022 AT 1000PST.The 163d Attack Wing requires construction materials listed on the subject solicitation to be constructed by others.  Required delivery date is 30 days ARO (based on material availability) with FOB Destination terms.  This is a total small business set-aside.  Please direct all questions to the point of contact on this listing.

Please refer to attached excel sheet for details and provide your quote as per the excel sheet. You have to prvide quote as per our quantity and specifications mentioned. Contact Information Laila Al Salmi Email: laila.alsalmi@asyad.om

Material Description -AC SPARE PARTS FOR DFT, List of materials is attached. PLEASE ATTACH DATA SHEET AND PICTURES ALONG YOUR QUOTE "Note1- " Your offer should be submitted with detailed specifications like dimensions, quality, brand (with photos) and other.

Material Description -AC SPARE PARTS FOR DFT, List of materials is attached. PLEASE ATTACH DATA SHEET AND PICTURES ALONG YOUR QUOTE "Note1- " Your offer should be submitted with detailed specifications like dimensions, quality, brand (with photos) and other.

The three-part coating system shall be manufactured by Tnemec as follows: Prime Coat Series 90-97 Tnemec Zinc at 2.5-3.5 mils DFT; Intermediate Coat Series Typoxy at 3.0-5.0 mils DFT; and Top Coat Series 1075U Endura-Shield II at 2.0-3.0 mils DFT. Standard color is 11SF Safety Blue. Material shall meet all State and Federal VOC and other regulatory requirements. 4.

Any rework necessary due to reaction between the two materials shall be performed at no charge to ARRC. 3.4.2 Pre-treat prepared bare aluminum surfaces with Dupont WPTM Chrome- Free Wash/Etching Pre-Treatment Primer Primer Urethane DFT 3-5 Primer Epoxy Mastic DFT 5-8 3.4.3 Primer shall be applied immediately after completion of surface preparation.

Any rework necessary due to reaction between the two materials shall be performed at no charge to ARRC. 3.4.2 Pre-treat prepared bare aluminum surfaces with Dupont WPTM Chrome- Free Wash/Etching Pre-Treatment Primer Primer Urethane DFT 3-5 Primer Epoxy Mastic DFT 5-8 3.4.3 Primer shall be applied immediately after completion of surface preparation.