Search results for: exciter for clean

G-12'S EXCITER FOR CLEAN, DIP & BAKE Refurbishment

G-12'S EXCITER FOR CLEAN, DIP & BAKE REFURBISHMENT Solicitation ID/Procurement Identifier: 140R1723Q0021 Ultimate Completion Date: Thu Mar 30 17:00:00 GMT 2023

Clean stator winding and rotor;  f.  Perform insulation and PI megger testing of the stator, rotor, exciter stator and exciter rotor;  g. Perform air gap measurements for the generator stator and rotor, exciter stator and exciter rotor and PMG;  h. Perform initial and final insulation and PI megger testing of the stator, rotor, exciter stator and exciter rotor;  i.  Commissioning of Alternator on load;  j. 

Abstract: REQUEST FOR QUOTE 183965,1 TitleCleaner DegreaserNegotiation TypeREQUEST FOR QUOTEStatusActiveBuyerLola ClarkEmailclarkl@detroitmi.govSynopsisThe City of Detroit Department of Transportation (DDOT) is seeking bids to set up a 2 Year contract for a supply of cleaner degreaser for their maintenance facilities. The DDOT facilities are used to maintain buses, service vehicles, and passenger automobiles and trucks. Amendment DescriptionInstructions Regarding QuestionsAttachmentsSTATEMENT OF WORK DEGREASER.pdf(105.74 KB) STANDARD PARAGRAPHS 183965.pdf(112.01 KB) Affidavit of Disclosure of Interests 4.4.2023 (1).pdf(194.91 KB) Non-Collusion...

Generator Check for moisture, dust, oils, greases, and debris on main stator windings, exciter, and PMG. Clean as needed. Cooling System - Drain, clean and flush. Replace thermostat(s). Refill with coolant solution and conditioner. Hoses and Belts Replace all heater hoses coolant pipe seals and fan and alternator belts Batteries - Battery replacement, replace the 4 engine starting batteries with Caterpillar maintenance free batteries.

Clean and adjust all controller and selector contacts. Renew worn contacts and/or shunts where necessary. Check sequence of operation. v. Wipe clean all motor, machines, generator, and exciter commutators, clean and check brushes and brush holders. Renew or reset brushes if necessary. vi. Clean and lubricate direction and accelerating switches. vii. Inspect brake operation.

Inspect and wipe clean all motors, machines, and generators. 3. Inspect controllers, selectors, selector drives, governors and hydraulic control valves. 4. Clean and adjust all controller and selector contacts. Renew work contacts and/or shunts where necessary. Check sequence of operations. 5. Wipe clean all motor, generator, and exciter commutators, clean and check brushes and brush holders. Renew or reset brushes if necessary.