SSPARC T5-4 SERVER: MODEL FAMILY SERIAL NUMBER AK00394145. Solicitation ID/Procurement Identifier: 692M1519D00014 Ultimate Completion Date: Fri Feb 10 18:00:00 GMT 2023
Vehicle, Engine, Property, or Hull Identification Number (VIN/EIN/PIN/HIN); e. Vessel type (if marine); f. Engine Model; g. Engine Model Year; h. Vehicle registration (if applicable); i. Gross Vehicle Weight Rating (GVWR); j. Vehicle Class; k. Engine Manufacturer; l. Engine Serial Number; m. Engine Family Name; n. Description of routes or typical use.
ESTContracting Point of Contact: Jay Khandekar, 202.736.5674, jay.khandekar@frb.gov SCOPE: The Contractor shall provide the items as show in the table below:Part/Support Quantity Description Serial Number CSI NumberB58179- (PREM-SPRT-SYS). 2 Exalytics In-MemoryX2-4: model family 1323FMJ025 19086037B58179- (PREM-SPRT-SYS) 1 Exalytics In-Memory Machine X2-4 1323FMJ025 19086037B58179- (PREM-SPRT-SYS
"Last updated: May 24, 2023\n\nEach existing unit must be diesel.\n\nEach existing unit must operate the majority of the time in New Hampshire.\n\nEach existing unit must be fully operational and in current, regular service.\n\nEach existing unit must have a minimum of three years of anticipated operational life remaining.\n\nApplicants must include the anticipated date of retirement of the unit on the Project Proposal\n\nForm included in Appendix Ai of this RFP.\n\n5. The applicant must currently own and operate each existing unit and have owned and operated\nit during the two years prior to the anticipated project start date.\n\n6. Usage Requirements: the existing unit must meet or exceed the corresponding usage\nrequirement listed below....
(VIN) f) Engine Model Year g) Gross Vehicle Weight Rating (GVWR) h) Vehicle Class i) Engine Manufacturer j) Engine Serial Number k) Engine Family Name l) Description of routes or typical use 6) For replacement projects, the replaced vehicle/engine/equipment shall be taken out of service no later than 15 days from the date the replacement vehicle/engine/equipment is put into service. 7) For replacement projects, the replaced vehicle/engine/equipment
Evidence of appropriate disposal (such as digital photos of the engine tag showing serial number, engine family number, and engine model year, and of the destroyed engine block and cut frame rails or other structural components) is required in a final assistance agreement report submitted to EPA. 4.
These records shall include prescription, plan of care, patient education documentation, reports of infections, safety inspection, initial setup with safety check, invoices/delivery slips, equipment list w/serial numbers, changes in patient care and family support system and any other documentation required by Joint Commission.
