Search results for: filters and drift eliminators

Bid #RFB 22-23-46 - Donaldson Inlet Filters and Drift Eliminators RFB Bid contact:Please log in to view Bid contact informationIssuing agency:City of Santa Clara, CASee other Bids by this agencyBid Comments: The City of Santa Clara (hereinafter “City”) is soliciting bids from qualified vendors to provide inlet filters with prefilters, and both upstream and downstream drift eliminators for two (2) Donaldson inlet units for GE LM6000 Turbines, in support

The City of Santa Clara (hereinafter “City”) is soliciting bids from qualified vendors to provide inlet filters with prefilters, and both upstream and downstream drift eliminators for two (2) Donaldson inlet units for GE LM6000 Turbines, in support of Silicon Valley Power, the City's Utility. This solicitation was previously issued under RFQ# 21-22-19.

is for the removal, blasting (via either high pressure water or dry ice) to remove rust, chipping paint and silicone caulking, recoating of and installation of all media which includes: weatherhood moisture separators, inlet filters, evaporative cooler media, and drift eliminators for the City of Tallahassee's Purdom Generating Station - Unit 8, a GE Frame 7FA gas turbine inlet filter house manufactured by Donaldson Company, Inc.

This work will include but not limited to the following; Replacement of the Fan, Shaft, Bearing, Belt and Drift Eliminator in each of the eastern most cells (2, 3, 4) and replace fill media, air inlet louver media, evapjet distribution system, fan deck support channels all four (4) cells.

This work will include but not limited to the following; Replacement of the Fan, Shaft, Bearing, Belt and Drift Eliminator in each of the eastern mostcells (2, 3, 4) and replace fill media, air inlet louver media, evapjet distribution system, fan deck support channels all four (4) cells.

Currently the media filters are clogged up with calcium deposits and other particles. This greatly reduces the air flow needed to efficiently cool the water. The shafts, bearings, air in-take louvers, drift eliminators, are original to the building built in 1994. They also need to be replaced as they are preventing sufficient air flow. They cannot be accessed without removing the media filters, louvers, and fan assemblies.

Currently the media filters are clogged up with calcium deposits and other particles. This greatly reduces the air flow needed to efficiently cool the water. The shafts, bearings, air in-take louvers, drift eliminators, are original to the building built in 1994. They also need to be replaced as they are preventing sufficient air flow. They cannot be accessed without removing the media filters, louvers, and fan assemblies.