Search results for: forward alignment

The Naval Surface Warfare Center Carderock Division (NSWCCD) requires the machining of one COLUMBIA Class (CLB) Forward Alignment Ring Machining to support on-time delivery of a full scale CLB propulsor. The machining of a Forward Alignment Ring requires a facility with approved classified safeguarding and CNC machining capabilities appropriately as described in the Performance Work Statement (PWS) and IAW drawings.

with Forward Toledo plan • Coordination with KTLCB, Woodlawn Foundation, and Toledo Public Schools on alignment with public education campaign and youth workforce development program • Development of an intake and selection process for residential tree planting program • Development of an outreach strategy, in coordination with KTLCB, the City of Toledo’s Department of Marketing and Communications, and communications consultant With the submission

At least Six fluorescent channels (similar to 530/572/675/780 nm off the 488 nm laser and 675/780 nm off the 640 nm laser) in addition to forward and side scatter channels. 3. Fixed optical alignment 4. Volumetric fluidics for cell counting 5. 24-bit data collection with dynamic range of six or more decades 6. Control software with manual and automated compensation ability 7.)

Side bumpers and a forward bump stop are utilized for vehicle alignment. The purpose of the pneumatic subsystem is to enable the craft to change draft for vehicle L&R operations. The pneumatic subsystem consists of inflatable panels (along the hull sides and bottom), hoses, a control panel, and other hardware required for the inflation/deflation of panels.

DOT&PF has accepted this proposal and is moving forward in developing the preliminary road re-alignment design. This decision eliminates the need to acquire right-of-way (property) from private land owners along the Meiers Lake corridor.The DOT&PF anticipates construction of the first segment (milepost 159-167) could begin the spring of 2019.                             

The forward “Z” Rail is stepped-up for the alignment of Leupold Mk4 12-40x60mm Tactical Spotting Scope with a variety of military-issue NV devices such as CNVD-T's, PVS-22's, PVS-24's, etc. No need to modify the existing interfaces on the devices, providing they are designed to interface with MIL-STD-1913 rails.

It was noted on further inspection by the vendor that the wheeler needed the rear suspension re- bush kit along with the all-wheel alignment. The decision to move forward with the repairs was made consistent with MDOT managements guidance considering T01-259 is 2014 international wheeler with 116210 miles. The repairs were made @ $5,791.28. The estimated replacement cost is $250.000 and is not scheduled for replacement yet.