This Statement of Work (SOW) describes the requirements for the Contractor to fabricate and deliver one ship set of ammunition hoist test weights for USCG WMSL cutters.1.2 Government-furnished property.None.2.
ANNUAL INSPECTION AND WEIGHT TEST OF UNIT HOIST AND CRANE AS PER SOW QUANTITY: 1 JB PLEASE FAX/E-MAIL QUOTES TO SK2 SHAWN LOVINGEMAIL: SHAWN.M.LOVING@USCG.MIL The Government will award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforming to the solicitation will be more advantageous to the Government, price and other factors considered
BIENNIAL WEIGHT TEST INSPECTION OF HOISTS AT 21 LOCATIONS. Solicitation ID/Procurement Identifier: HSCG4017D53001 Ultimate Completion Date: Fri Dec 31 18:00:00 GMT 2021
Test inaccordance with Tech Pub3562/3720 Appendix C, YMD-12846 Installation Manual,paragraph 4.0 ‘Start Up’ and allfollowing 4.X subparagraphs.Main Hoist test weights are asfollows:- No load operational test.- Dynamic: 7,500 (+375 -0)pounds.- Rated: 6,000 (+0 -300) pounds.Submit a CFR.10 Fabricate andInstall1 Label Plate B2.9 (Label Plates)4.
Test inaccordance with Tech Pub3562/3720 Appendix C, YMD-12846 Installation Manual,paragraph 4.0 ‘Start Up’ and allfollowing 4.X subparagraphs.Main Hoist test weights are asfollows:- No load operational test.- Dynamic: 7,500 (+375 -0)pounds.- Rated: 6,000 (+0 -300) pounds.Submit a CFR.10 Fabricate andInstall1 Label Plate B2.9 (Label Plates)4.
Weight test rail system at (1) times the systems weight capacity of the rail system. Test hoist and drive motor for proper function. Test charging liners for proper voltage. Replacing batteries that are at least 18 months in service (as indicated by a dated battery service date sticker). Replacing emergency pull cords and lifting straps that fail to meet the manufacturer s criteria for PM compliance.
Army Contracting Command - Redstone (ACC-RSA) is issuing this Request for Information (RFI) as a means of conducting market research to identify a currently available solution and/or to determine industry capabilities to design, develop, test, validate and verify a hardware solution for a transportable weights or hoist test load that will function as the rescue hoist test load for a Helicopter Rescue Hoist in both static and dynamic operational environments
