Search results for: hood near bldg

The purpose of this solicitation is to acquire services for Cleaning of Hood and Duct Exhaust Systems for Twenty (20) commercial cooking facilities located at Edwards Air Force Base, California. Please note: Four of the twenty facilities have more than one hood/duct exhaust system. Specifically, three facilities have two exhaust systems and another facility has seven exhaust systems.

Added:Jun 26, 2019 7:07 pmDESCRIPTION OF WORK:The work shall be located at building 26041, located near the intersection of West Ivy Division Ave and Hell on Wheels Ave, Fort Hood Texas. The exact location will be shown by the Contracting Officer.

AttachmentsAttachment Number Description Pages Date1 Fume Hood Installation PWS 5 8 August 20192 Wage Determination 18 8 August 2019 

and grill hood is one system consisting of approximately: 6LF 20" x 14" duct 18LF 18" x 18" duct 4 LF 14" x 10" duct 18LF 10" x 6- duct 18LF 8" x 8" duct 12LF 6" x 6" duct Grill Hood 3 Rooftop Exhaust Vents 2 Oven Hoods 6 x 5 1 Rupp Ser.

Include vented hood and setscrews to secure to vent pipe. 2. Size: Same as connected stack vent or vent stack. E. Expansion Joints: 1. Standard: ASME A112.21.2M. NHARNG – Concord SMR Building “C” Latrine Renovation April 14, 2021 TTG Proj. No. 5038 SANITARY WASTE PIPING SPECIALTIES 221319 - 6 2. Body: Cast iron with bronze sleeve, packing, and gland. 3. End Connections: Matching connected piping. 4.

The oven shall be of stainless-steel construction, with footprint no larger than 72.0 W x 62.0 D x 104.5.0 H and shall have an integral hood with a minimum of 31 overhang to ensure proper vapor capture. The Type I hood must be UL710 Listed and have a single point exhaust. Oven shall have independent electrically interlocked air safety switches for the draft inducer and hood.

adjustments made.A summary of the survey showing the number of hoods in each building, the number that meet the requirements of this contract and the number which are unacceptable.A list shall be provided to the COR within three (3) working days of completion of work with those hoods that could not be recertified along with attempts made to adjust them.