HYDROGEN-BASED ENERGY CONSERVATION SYSTEM Solicitation ID/Procurement Identifier: 80NSSC20C0078 Ultimate Completion Date: Thu Sep 29 17:00:00 GMT 2022
Air Freshener system using a non-aerosol, hydrogen-based odor neutralizer providing continuous odor control 24 hours a day. Anti-Splash Urinal Screens. Electronic Sanitary Waste Disposal
Hydrogen storage technologies for bulk storage and limited footprint areas Challenge 4. Hydrogen-based generation systems for microgrids and grid support servicesChallenge 5. Hydrogen fuel cell electric vehicles.
Air Freshener system using a non-aerosol, hydrogen-based odor neutralizer providing continuous odor control 24 hours a day. Anti-Splash Urinal Screens. Electronic Sanitary Waste Disposal and Vending Services. Contractor is responsible for the verification of quantities and locations. The sanitary disposal unit shall have a no touch infra-red lid operation and will be placed next to each toilet in the women s restrooms.
CLIN 0001: Qty. one (1) each Hydrogen Gas Palladium-based PurifierSpecifications/Requirements:The contractor shall provide qty one (1) Hydrogen Gas Palladium-based Purifier with the following characteristics:Palladium membrane purifier for hydrogen; unlimited lifetime – no regeneration requiredMinimum Inlet (feed gas) hydrogen purity of 99.99 percent (%)Minimum Outlet (purified gas) purity 99.9999999% hydrogenTypical pure hydrogen flow rate of 20
The ultimate goal is to develop clean hydrogen production based on efficient gasification processes with carbon capture included to assure true net-zero or net negative carbon emissions performance per suitable life cycle analysis. This is solely a request for information and is not a Funding Opportunity Announcement. The Department of Energy is not accepting applications to this Request for Information.
peroxide based high level disinfectant d) Unit must be small enough to fit on an existing counter-top with limited space e) Dimensions should not exceed 21 high x 14.2 wide x 12.5 deep with a minimum clearance not to exceed 10" on either side f) The empty weight of the unit should not exceed 50 pounds g) Unit should be able to run on 120VAC, 50/60Hz, with amperage not to exceed 6amps h) Must have a separate external printer for printing processing
