Supply and Installation of Hyperspectral Camera System Saskatchewan Polytechnic 24SASKPOLY04-18 Mar 19, 2024 10:15 AM CST Apr 09, 2024 03:00 PM CST Open
N00164-22-Q-0212 – HYPERSPECTRAL CAMERA – FSC/PSC 6710 - NAICS 333316ISSUE DATE 20-JUL-2022 – CLOSING DATE 18-AUG-2022 – 5:00 PM Eastern TimeITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for hyperspectral camera in accordance with the specifications listed below. The requirement is utilizing brand name or equal.
CLIN 0001: Qty one (1) each Hera Hyperspectral Camera HERA-VIS.Specifications and Requirements: 400-1000 nanometer (nm) (also known as: VIS-NIR) detection range1.5 nanometer (nm) frequency resolution or less at 400 nanometers (nm)At least 1.3 megapixel (MP) spatial resolutionSoftware packages for data export and analysis12 bit depth sensorSensor resolution: 1280 x 1024 pixelsCommon-mode spatial detection path
camera that can be mounted to a Blackbird laboratory leaf disk imaging robot for early detection of disease at micron scales which meets the following specifications:Must be able to be attached to a robotic frame that moves the camera or samples in X-Y-Z directions for positioning of leaf disks under the camera.
NIST has a need for a Hyperspectral Camera system that meets or exceeds the following draft minimum specifications: Hyperspectral Camera System Requirements Configuration: Push broom with external motion for scanning Spectral Range: 400 nm to 1000 nm or greater Spectral resolution: 2 nm or less (1 nm to 2 nm acceptable) Spectral bands: 400 or greater Spatial pixels (across track): 1600 pixels Frame rate: within range of 150 to 200 fps Dimensions:
Statement of Requirements: Pushbroom NIR Hyperspectral CameraThe USDA, ARS, USNPRC intends to solicit for a high-speed near-infrared (NIR) hyperspectral image camera including an InGaAs sensor, a spectrograph (spectrometer), an objective lens, a frame grabber, an illumination source, acquisition software, and a software development kit (SDK). The NIR hyperspectral image camera must use the pushbroom technology for line-scanning.
NIST has a need for a Hyperspectral Camera system that meets or exceeds the following draft minimum specifications:Hyperspectral Camera System RequirementsConfiguration: Push broom with external motion for scanningSpectral Range: 400 nm to 1000 nm or greaterSpectral resolution: 2 nm or less (1 nm to 2 nm acceptable)Spectral bands: 400 or greaterSpatial pixels (across track): 1600 pixelsFrame rate: within range of 150 to 200 fpsDimensions: 265 mm x
