Type : Bid Notification
Title:- Furnish & Install Mechanical Sheet Metal Shear Number:- BP#0602-22 Due Date:- 6/30/22 11:00AM
Title:- Furnish & Install Mechanical Sheet Metal Shear Number:- BP#0602-22 Due Date:- 6/30/22 11:00AM
If circuit setters are not installed, will a change order be considered to install in order to balance the system?Sheet M302 of the mechanical plans seems to show circuit setters near the coils. If circuit setter is required for your approach/sytem include it in your offer. 4. “Commissioning” requires parameters in which to test to. If true “commissioning” is required, we will need either a specification or CxA plan to test to.
Fasten deck to steel support members at ends and intermediate supports with mechanical fasten twelve inches o.c. maximum. 5. Install six inch wide sheet steel butt strip where deck ends butt. Mechanically fasten butt strips to steel deck six inches o.c. E. Deck Protection: Apply rust inhibitive primer over surface that was cleaned of rust.
Security Bars: Where indicated on the Mechanical Schedule Sheet, provide security bar on louvers. Install security bar on the interior side of louver with steel frame attached to wall. Bars shall be ½” steel bars on 6” on center and orientated vertically. 2.06 WALL VENTS A.
COVER SHEET 19.0270 February 10, 2020 Grand Junction, CO LAS COLONIAS AMPHITHEATER - ADDITION PERMIT SET MECHANICAL SHEET INDEX ME001 MECHANICAL COVER SHEET ME002 HVAC NOTES ME003 HVAC NOTES MH101 MECHANICAL PLANS ME501 HVAC DETAILS ME601 MECHANICAL SCHEDULES ABBREVIATIONS NOTE: ALL ABBREVIATIONS MAY NOT BE USED.