The contractor shall furnish and install new wiring for the new vacuum system. Wiring furnished by this work shall comply with Reference (a) and Reference (b) requirement for laboratory vacuum systems. 6.11. The contractor shall test the installed new vacuum system per Reference (a) and as required per NFPA 99, Reference (b). a.
AMIC DET-2 OL/PKA and AFTAC are seeking information from potential sources to purchase Harkins Lab Vacuum Chamber1.1 Technical RequirementsThe contractor shall meet all of the technical requirements outlined below:1.2 Drawing ProposalThe contractor shall provide their manufacturing drawing prior to manufacture for technicalapproval by the individuals identified in paragraph 6.5 of the attached Statement of Objective (SOO)1.3 Design RequirementsThe
VACUUBRAND VACUULAN - CUSTOM LAB VACUUM SYSTEM PACKAGE FOR UNDERGRADUATE ORGANIC Project Description :The University of Waterloo (UW) intends to award a single source contract to Fisher Scientificof Ottawa, ON, for the purchase of a VACUUBRAND VACUULAN - CUSTOM LAB VACUUM SYSTEM PACKAGE.
See attached RFQ, SOW, drawing and FAR/DFARS RFQ provisions.
Geological Survey, Eastern Ecological Science Center in Turners Falls, Massachusetts has a requirement to remove and replace the existing laboratory vacuum and compressed air systems, with an option to replace the regenerative blower system for the Conte Anadromous Fish Research Laboratory.The period of performance is 120 days from issuance of Notice to Proceed.The project magnitude is between $100,000.00 to $250,000.00.RFQ 140G0122Q0182 will be issued
The contractor shall furnish and install new wiring for the new vacuum system. Wiring furnished by this work shall comply with Reference (a) and Reference (b) requirement for laboratory vacuum systems. The contractor shall test the installed new vacuum system per Reference (a) and as required per NFPA 99, Reference (b).
On behalf of the Industrial & Manufacturing Systems Engineering Department (IMSE), Iowa State University is requesting bids for a Lab Scale Vacuum Induction Furnace. The equipment will used to melt and cast alloys, especially magnesium alloys that requires vacuum or inert gas. Suppliers should read all materials carefully and note the due date.
