LUBE OIL SAMPLE ANALYSIS TESTING Solicitation ID/Procurement Identifier: 140R1719Q0043 Ultimate Completion Date: Mon Sep 30 17:00:00 GMT 2024
GCPO LUBE OIL SAMPLE ANALYSIS TESTING Solicitation ID/Procurement Identifier: 140R1719Q0043 Ultimate Completion Date: Tue Dec 31 18:00:00 GMT 2024
GCPO LUBE OIL SAMPLE ANALYSIS TESTING
Naval Surface Warfare Center Philadelphia Division (NSWCPD) Sources Sought notice for testing and analyzing lube oil samples for diesel engines under the Diesel Readiness Systems program and reduction gear samples under the HM&E Sustainment Program. See attachments for further information.
Prior to securing unit, draw lube oil samples from each unit to send for analysis. Test function of all heaters on Evaporators, Evaporator Drip Pans, and Drain Lines. Rebuild or replace valves in the system from the GFP list. In addition, contractor will replace dehydrator cartridges, sight glass moisture indicators, and oil filters. The Oil Cooler and Refrigerant Condenser end bells will be removed and tubes checked for clogs.
The Naval Surface Warefare Center, Philadelphia Division (NSWCPD) has a requirement for procurement of testing and analyzing lube oil samples for deisel engines under the Diesel Readiness Systesm program and reduction gear samples for the HM&E Sustainment Program. All Offerors shall be registered in the System for Award Management (SAM) database.
Lube Oil System 3.1. Check oil level. 3.2. Check engine oil pressure 3.3. Check oil filter differential pressure 3.4. Take a sample of lube oil for analysis (once per year). Provide report to COR. 4. Air Intake and Exhaust System 4.1. Check clean air condition. 4.2. Listen for any unusual noises from this area. 4.3. Check air intake louvers for proper operation. 4.4. Ensure that air intake flow is not unduly restricted. 4.5. Exhaust system 4.6.
