Search results for: maintenance platforms

platforms over a two (2) calendar year period: 2 maintenance platforms in 2019, one in 2020.

Hydropower Turbine Maintenance Platforms are used for performing inspections and maintenance on the turbine runner and blades, such as cavitation repair, and is installed every time a Unit goes down for annual maintenance. The turbine maintenance platforms must be installed in the draft tubes of the units with through a 2-ft wide by 3-ft tall mandoor. The platforms must be fabricated, load tested, and installed the first time.10.

The contractor will deliver twenty-four (24) steel maintenance platforms to Barkley Lock located in Grand Rivers, KY. The platforms will be offloaded by the Government. No installation work is required, or allowed, in this contract. Refer to the accompanying specification for a full list of requirements.

The size standard for NAICS is 1,250 employees.Purpose: The purpose of this sources sought is to seek out commercial contractor that can provide; all management, tools, supplies, equipment, labor, and supervision necessary to disassemble, transport from Dover Air Force Base to Joint Base Charleston, refurbish, and install two sets of C-17 Engine Maintenance Platforms that were manufactured by HHI Corporation.

This is an Invitation for Bid for Turbine Maintenance Platforms in accordance with the Technical Specifications for the U.S. Army Corps of Engineers, Walla Walla District, at Lower Granite and Lower Monumental Lock & Dams. Product Service Code:- 5440 - SCAFFOLDING EQUIPMENT AND CONCRETE FORMS NAICS Code:- 332312 - Fabricated Structural Metal Manufacturing Primary point of contact:- Andrew J.

Therefore, the contractor shall provide all necessary labor, material, and equipment to fabricate, assemble, and deliver twenty-four (24) steel maintenance platforms in accordance with the plans and specifications provided. The contractor shall make each platform approximately 7 feet wide, 13 feet long and 7 feet tall.  The platform is estimated to weigh approximately 3,500 pounds. 

(v) Contractors shall submit a quote for the transportation/refurbishment and one (1) year warranty of two (2) sets (four (4) total) of C-17 Maintenance Platforms, in accordance with the attached Performance Work Statement (PWS), utilizing the attached RFQ worksheet. Training on the use of the platforms shall be provided to the end user, (after refurbishment and delivery) located at Joint Base Charleston, SC.