Search results for: manufacturer-provided air brake

Air Brake Training Services.

HITEC COMMERCIAL SOLUTIONS SUI ENDURANCE PRECISION PPK SYSTEM AND MANUFACTURER PROVIDED TRAINING Solicitation ID/Procurement Identifier: NCNJ10002100131 Ultimate Completion Date: Thu Dec 29 18:00:00 GMT 2022

Requirements:--4-hour response time to service or support inquiries--24-hour turnaround time for any parts needed for repair--Onsite service by factory-authorized and -trained service personnel in the event of mechanical failure or failure to function properly--All software updates provided by the manufacturer during period of performance--24-hours-a-day, 365-days-a-year access to manufacturer-provided service personnel by telephone and e-mail to

The HVAC improvements consist of the replacement of two existing air-cooled chillers located at grade. The new chillers shall be installed on the existing concrete pads with manufacturer-provided support rail curbs and reconnection to the existing chilled water system distribution piping and electrical connections. The existing distribution pumps and Variable Frequency Drives will also be replaced.

will be the verification of the manufacturer-provided calibration values with relative errors of less than 0.5 % and fixed errors of less than 0.001 in.PERIOD OF PERFORMANCEThe period of performance shall be 60 days from date of award.PAYMENT TERMSOne lump sum payment will be authorized upon the successful testing and acceptance of the Contractor's delivered products.APPLICABLE PROVISIONS AND CLAUSESPlease see the attached document for applicable

USAMMA is the Army's medical manager and therefore considers any medical equipment alteration, including the substitution of manufacturer-provided or approved repair parts with other repair parts to be contrary to Army and FDA regulations, endangering the device's FDA certification, and incurring product liability on behalf of the Army.9.

Testing and AcceptanceUpon receipt of the LVDTs, NIST will test the LVDTs in accordance with the ASTM E2309-16 Standard with 10 V DC excitation, and the results will be used to verify the manufacturer-provided calibration values.Acceptable performance will be the verification of the manufacturer-provided calibration values with relative errors of less than 0.5 % and fixed errors of less than 0.001 in.PERIOD OF PERFORMANCEThe period of performance