Description: Livermore researchers have developed a multimaterial powder bed patterning which is a new additive manufacturing method using selective powder bed patterning. Granular flow of powder is induced by applying an excitation source such as a mechanical or sonic vibration force to a nozzle. The build plate or the nozzle are translated in space to obtain the desired pattern.
Laser Powder Bed System Contact Information: Clint Rash, Procurement Manager, Email email@example.com Office Address :Bethel Valley RoadP.O. Box 2008 Oak Ridge TN 37831-6192 Location: Oak Ridge National Laboratory Set Aside: N/A
Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate. (2) Date : 25 October 2017 (3) Classification Code : 36 (4) NAICS Code: 333318 (5) NAICS Size Standard: 500 Employees (6) Contracting Office Address: 2800 Powder Mill Road Bldg. 601 Adelphi, Maryland 20783 (7) Subject: Sources Sought for one (1) Powder Bed Fusion (PBF) system (8) Proposed Solicitation Number: W911QX-18-T-0007 (9) Sources
NNL is issuing this request for information to identify sources capable of developing and building laser powder bed fusion machines with build heights of 53 inches or greater. These machines should have horizontal dimensions of at least 10" x 10" in addition to the increased build height of 53 inches. Increased build height will be used to manufacture parts requiring more space than is currently available in commercial machines.
Colorado School of Mines (Mines) requires a laser powder bed fusion (PBF) additive manufacturing machine (AM) capable of fabricating metallic articles using standard and non-standard alloys in support of a project exploring metal AM for fabricating structural components for the US defense community. ...
Bed Fusion Metal 3D Printing System The Faculty of Engineering - Mechanical Engineering Department is looking to procure a turnkey solution along with necessary accessories for operation and powder handling for a selective laser melting system.
[4:08 PM] Wilson, Chad Commercially available and supported electron beam metal powder bed additive manufacturing system complete with all accessories for operation as well as a second set of vacuum chamber internal components to allow rapid material changes. System should also include an in vacuum chamber camera based monitoring system for part quality verification.
THIS PROJECT WILL DEVELOP METHODS OF PREDICTING AND CLASSIFYING PROCESS AND MICROSTRUCTURAL DEFECTS IN LASER POWDER BED FUSION MANUFACTURED NICKEL-BASED SUPERALLOYS Solicitation ID/Procurement Identifier: 80NSSC21M0100 Ultimate Completion Date: Tue May 14 17:00:00 GMT 2024
On behalf of the Ground Vehicle Systems Center’s Materials Directorate – Additive Manufacturing Team (GVSC MD AM), ACC-DTA is conducting market research to understand capabilities related to the below requirement: Scope: This supplies Performance Work Statement (PWS) establishes the requirements for one Direct Metal Printing (DMP) Laser Powder Bed Fusion (L-PBF) Equipment for the GVSC MD AM Team.