Search results for: powder sieving

This process is time consuming and can present safety issues if performed without a sieving vacuum system.  The powder reclamation system described below improves safety and reduces the labor hours associated with the 3D printer setup by up to 85%.The Metal Powder Recovery System must consists of the following components:Pick up hand tool, with standard KF fittingStatic conductive hose, smooth bore. Hose to be FDA and USDA approved.

The system must also include the following accessories so that the printer may be operated upon delivery: industrial vacuum cleaner, vacuum dry oven, explosion-proof powder sieving machine, an annealing oven that can hold a 30 cm x 30 cm x 40 cm object, a sand blasting machine, a wire cutting machine, a nitrogen generator, and should include at least 30 kg of aluminum alloy (AlSi10Mg) and invar powder for immediate use.3.

Powder Classifier/Sieving (Scientific Instruments) --- Powder Classifier/Sieving RFP Source: Government of Quebec - SEAO Quebec June 07, 2023

Technical Response General Information Battelle requests respondents provide the following information: Please describe your relevant experience and/or technical expertise with a) designing, building, delivering and integrating custom engineered devices for sieving, weighing, and aliquoting solids/powders like soil in large volume tubes (50 ml and 15 ml),  conducting liquid extractions and filtering out residual particulates (syringe filters or equivalent

including, but not limited to, metal, plastic and ceramic.• Shall have a stainless steel body.• Shall have a rigid steel stand with wheels for the screener.• Shall have stainless steel support mesh appropriate for sieving powders.• Shall have replaceable and moveable stretched screen mesh.• Shall have a stainless steel cover.• Shall have stainless steel screening mesh.• Shall have a screen size less than or equal to 400 millimeters (mm) in diameter

BLACK POWDER FOR HISTORIC WEAPONS Solicitation ID/Procurement Identifier: 140P6223P0009 Ultimate Completion Date: Thu Nov 30 18:00:00 GMT 2023