Search results for: probability of detection

of detection), SWAP, radio, waveform, communicationsREFERENCESK.

Traditionally, inspection systems are validated using various methodologies to determine probability of detection (POD). One widely accepted metric of an adequate inspection system is that there is 95% confidence that the POD is greater than 90% (90/95 POD). Directed Design of Experiments for Probability of Detection (DOEPOD) is a user-friendly software package that enables detailed analysis of 90/95 POD or at any specified confidence level.

PROBABILITY OF DETECTION AND VALIDATION FOR COMPUTED TOMOGRAPHY PROCESSES FOR ADDITIVE MANUFACTURING (20-RD-231) Solicitation ID/Procurement Identifier: 80NSSC20C0360 Ultimate Completion Date: Mon Mar 01 18:00:00 GMT 2021

at a 90% Probability of Detection with a Confidence level of 90% (500 feet AGL with a slant range of 800 meters at a 95% Probability of Detection with a Confidence Level of 95%.The sUAS shall be able to detect ground vehicle sized target in low/no light from 200 feet Above Ground Level (AGL) with a slant range of 300 meters at a 90% Probability of Detection with a Confidence level of 90% (500 feet AGL with a slant range of 600 meters at a 95% Probability

Combined Synopsis/Solicitation for the Three Nondestructive Inspection Capability Demonstration Test PanelsThe three eddy current demonstration test panels will be used in Non Destructive Inspection (NDI) Probability of Detection (PoD) studies.

The tool shall allow the user to model radar characteristics to a level to support coverage analysis based on probability of detection for varying targets (e.g., non-fluctuating, Swerling 1 through 4).

Important parameters may include response time, range to target, false alarm rate (FAR), probability of detection (PoD), description/classification and azimuth/elevation to target.The information provided will support market research, project planning for systems research, to include systems requirement development. This Request for Information (RFI) seeks to gauge the industry's technical capability and current state of the art.