Search results for: related spaced

Attached is the Request for Lease Proposal No. 57-51019-20-FA for Bedford County (Bedford, VA) containing all procurement requirements and specifications.All offers must be submitted by 11/02/2020 to be considered. Any offers submitted beyond that date are subject to rejection.Unsolicited offers must confirm they are within the Delineated Area and not within a 100 or 500-year flood plain.

components of the ground motions;•             Clarity of the guidance and gaps related to the closely spaced modes for certain combinatorial methods in the current RG 1.92; and•             Evaluation and update of RG 1.122 to replace the peak widening method, which is considered outdated, with methods that can better capture uncertainties in the in-structure response spectra.The resolution of these issues requires complex stochastic simulations

Minimum of two bolts for a 7 inch wide band, three bolts for a 12 inch wide band, and five bolts for a 24 inchwide band, uniformly spaced.

The Contractor must abide by the following when performing preservation related inspections. The following measurements must be randomly spaced throughout for the purposes of providing a representation of the entire prepared or coated surface.3.3.3.1.1 Surface profile measurements.

The Contractor must abide by the following when performing preservation related inspections. The following measurements must be randomly spaced throughout for the purposes of providing a representation of the entire prepared or coated surface.3.3.3.1.1 Surface profile measurements.

The Contractor must abide by the following when performing preservation related inspections. The following measurements must be randomly spaced throughout for the purposes of providing a representation of the entire prepared or coated surface.3.3.3.1.1 Surface profile measurements.

Geotechnical report shall characterize bedrock including hardness. 1.9.2 Roadway related borings: 10 evenly spaced borings for the roadway, with an additional 10 borings if authorized a minimum of 10 feet in depth and 5 feet into bedrock if encountered. 1.10 Supporting infrastructure of lighting, landscaping, electrical, etc. on the bridge shall not be located within the bridge deck itself and shall be designed in such a way to be accessible for maintenance