This is a Request for Quote to replace an existing exhaust fan.The objective of this project is to replace “in kind” the existing Strobic Model BS-2/15 Lab Exhaust fan for Building 1 with a new Strobic fan (or approved equal) that meets the performance characteristics of the existing model as designated in this Statement of Work.
Page 2 of 2 The Department of Veterans Affairs, Great Lakes Acquisition Center (GLAC) is searching for vendors with the capabilities to remove a Lab vent hood assembly and install the new Lab vent hood assembly located at Tomah VAMC located in Tomah, WI. This project is to replace the Lab Vent Hood in Building 400 Room 2055. A new hood has been purchased and is in storage at the VA.
This is a Request for SF330s for Architect/Engineer (A/E) Design Services for Project Number 552-CSI-180, Site-Prep Replace Cath Lab at the Dayton VA Medical Center, 4100 W. Third St., Dayton, Ohio 45428. Design work will include Site-Prep for Replacement of Cath Lab on the campus of the Dayton VAMC.
Geological Survey, Eastern Ecological Science Center in Turners Falls, Massachusetts has a requirement to remove and replace the existing laboratory vacuum and compressed air systems, with an option to replace the regenerative blower system for the Conte Anadromous Fish Research Laboratory.The period of performance is 120 days from issuance of Notice to Proceed.The project magnitude is between $100,000.00 to $250,000.00.RFQ 140G0122Q0182 will be issued
With the exception of a direct drive motor in lieu of a belt drive motor, the new fan, motor, and assembly shall match the existing units to be replaced with respect to size, function, capability, and quality.The Contractor shall Test, Adjust, and Balance the entire lab area via the use of a hood (and not by measuring Air Handling Unit and Exhaust Fan Unit static pressures).
REPLACE LAB AND POD 1, 2 AND 4 AHUS (PHASE 1 LABS 3&4) Solicitation ID/Procurement Identifier: F16CC10364 Ultimate Completion Date: Wed Dec 01 18:00:00 GMT 2021
C106114 - REPLACE LAB DOOR WITH PASS-THROUGH CHAMBER - BLDG 10 1C482/1C484 - MICHAEL OPPELT Solicitation ID/Procurement Identifier: 75N99019C00052 Ultimate Completion Date: Fri Mar 20 17:00:00 GMT 2020
