tests Safety Requirements Annual inspections shall be performed as defined in ASME A17.1 Elevator Safety Code Maintenance and Repair shall be conducted in accordance with VA Safety and Security Standards, ASME A17.1 Elevator Safety Code, OSHA 29 CFR 1910 and 29 CFR 1926 as well as all standard OSHA safety guidance.
Added:May 07, 2019 12:18 am The Veterans Health Administration (VHA), Charles George VA Medical Center (VAMC) located at 1100 Tunnel Road, North Carolina will be soliciting offers for Elevator Load Safety Test services. The contractor shall provide all transportation, material hardware and parts, tools, specialized equipment, labor, supervision and technical expertise to provide Elevator Load Safety Tests at the Charles George VA Medical Center.
The work to be performed under this contract includes furnishing all labor materials, travel time, equipment and all other work incidental thereto necessary or required for the complete monthly maintenance, inspections, repairs, and all applicable safety tests & emergency services for elevators, located Citywide, for the City of New York Parks & Recreation(“Agency”).
This pre-solicitation notice is for a non-personal services contract to perform electric safety tests (E-Check) within USAG Ansbach.
During the 5 Year testing, will the hydraulic elevators be required to have the rupture valve test performed? This test varies based on locations. Some VA locations require this test to be performed while other VA locations do not. RESPONSE: Yes, the rupture valve test is required during the 5 year full load test.
Added:Jun 10, 2019 10:07 am The Veterans Health Administration (VHA), Charles George VA Medical Center (VAMC) located at 1100 Tunnel Road, North Carolina will be soliciting offers for Elevator Load Safety Test services. The contractor shall provide all transportation, material hardware and parts, tools, specialized equipment, labor, supervision and technical expertise to provide Elevator Load Safety Tests at the Charles George VA Medical Center.
B) Tests and Reports 1. Yearly inspection and report: Contractor shall conduct, annually a non-load, low speed test of elevator car and counterweight safeties, a test of buffers and safety device tests and a hydraulic elevator pressure relief valve test as required by ANSI A 17 code. Every fifth year, the contractor shall conduct a rated load, rated speed safety test and a test of governor’s safeties and buffers.
