One (1) Hot Wall Furnace for stress relieving additive manufacturing builds.NB: Please pay attention to the attached evaluation criteria. Request for Quote (RFQ) due date extended to: 6/12/2020. Questions & Answes document attached.
SPECIAL REQUIREMENTS: THIS PART REQUIRES CRITICAL CHARACTERISTIC - THERMAL STRESS RELIEVING PER NOTE 16 ON REV AU SERIAL NUMBER REPORTING REQUIREMENT (SNRR) APPLIES TAMMS_A REPORTING DOES NOT APPLY TEST LOCATION - CONTRACTOR FAT IAW 52.209-3, Alt I Send report to: PCO and DSCR.test (>&)>evaluationoffice@dla.mil 52.209-9017 ALT III, ALT V 52.209-9019 PRODUCTION LOT SAMPLE TESTING REQUIRED
Art Therapist to offer 1-1.5-hour group sessions to help patients identify emotions, offer strategies to assist with emotional regulation, develop stress relieving coping skills, and help facilitate a method of communication. Maximum 8 hours per week.
MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. (78286) SIKORSKY AIRCRAFT CORPORATION ALTERED ITEM; MAKE FROM NAS1275-49 TO INCLUDE THE STRESS RELIEVING HOLES IN THE HEAD OF THE BOLT. MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S.
MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. (78286) SIKORSKY AIRCRAFT CORPORATION ALTERED ITEM; MAKE FROM NAS1275-49 TO INCLUDE THE STRESS RELIEVING HOLES IN THE HEAD OF THE BOLT. MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S.
Pipefitting (targeting, fitting, bending, pickling, testing, stress relieving and threading); v. Machinist/Mechanical (removing, machining, repairing, testing, cleaning, hydraulic flushing and reinstalling shafting, propellers, sea chests, foundations, winches, elevator hoists, davits, deck equipment, pumps, valves and bearings); vi.
MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. (78286) SIKORSKY AIRCRAFT CORPORATION ALTERED ITEM; MAKE FROM NAS1275-49 TO INCLUDE THE STRESS RELIEVING HOLES IN THE HEAD OF THE BOLT. MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S.
