Search results for: ton package heat pumps

Description SCOPE OF WORK Contractor shall remove and dispose of four existing 2.5 ton package units. The contractor shall install four new 2.5 ton package heat pumps with thermostats. The new equipment shall match the existing equipment voltage and phase. The contractor shall supply new disconnects with new conduit and power wire from the new disconnect to the new unit. All duct work shall be sealed with mastic.

PROVIDE ALL EQUIPMENT, LABOR, MATERIALS, SUPPLIES, SUPERVISION AND INCIDENTALS NECESSARY FOR THE REPLACEMENT OF A SIX-TON (6-TON) PACKAGE HEAT PUMP, ECONOMIZER, HEAT STRIP AND THERMOSTAT AT THE MEDFOR... Solicitation ID/Procurement Identifier: 1240BK24Q0061 Ultimate Completion Date: Thu May 30 17:00:00 GMT 2024

The MCIEast Cherry Point Satellite Contracting Office, Marine Corps Air Station (MCAS), Cherry Point, NC 28533, has a requirement for one (1) Trane WSC120H4R0B-D0B 10 Ton Package Heat Pump in accordance with the attached solicitation.The proposed contract action is 100% set-aside for small business concerns. The North American Industry Classification System (NAICS) code for this requirement is 333415.

Description SCOPE OF WORK Contractor shall remove and dispose of the two existing package a/c units. The contractor shall supply and install one new 3 ton package heat pumps and one new 5 ton package heat pump with thermostats. The contractor shall install new disconnects, new conduit and power wire from disconnect to the new units. The new units shall match existing equipment’s Btu, voltage and phase. All duct work shall be sealed with mastic.

Description SCOPE OF WORK Contractor shall remove and dispose of existing 15 ton heat pump and install a new 15 ton gas package unit with 250,000 BTU heat and thermostat. The contractor shall supply a new curb adapter. The new unit will match existing unit voltage and phase. The contractor shall run new power wire and conduit from the disconnect to the new unit. The contractor shall install the proper fuse protection for the new unit.

TV's and TV Mounts to be Provided by Customer.HVAC 14 Seer Heat Pump 2 Ton Package Unit No Master Control System tie-in required Honeywell ProSeries Thermostat (or equivalent)Install Vinyl Stone SkirtingEnclosed Deck with Screen Porch 10'x10' to be Stained to Match Other 3 Bedroom Cabins On-site.

Provide and install a new 7.5 ton package unit/Heat pump on existing roof jack, to include all necessary material and labor required for turnkey installation in accordance with NFPA fire codes, City of San Antonio codes and current plumbing and electrical codes including Texas Commission on Environmental Quality rules and regulations.