Search results for: visual inspection of dry

Visual Inspection of Dry Chemical TanksFA930122Q0020*****Notice to Vendor(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this Request for Quote (RFQ) until funds are available. The Government reserves the right to cancel this RFQ, either before or after the closing date. In the event the Government cancels this RFQ, the Government has no obligation to reimburse a vendor for any costs. ***** 1.

Have full glass doors for rapid visual inspection of stored items. 2. Use indirect UV air treatment to quickly dry instruments, equipment, and general items. 3. Cabinets provide a controlled storage environment with HEPA H14 filtered air flow. 4. 8 stainless steel shelves, removable, adjustable with a total capacity up to 16 DIN 1/1 trays; allows custom configuration. 5.

Accomplish an Ultrasonic test (UT) measurement and visual inspection (VT) of the hull. Open, Clean, Pump, maintain clean and dry each tank/void. Inspect tanks/Voids for defects. Air-test each Tank/void and Skeg. Identify each Tank/Void. Accomplish a final closure inspection of each tank/void upon completion of all work. Install new tank gaskets and fasteners. Replace watertight door and hatch gaskets.

Accomplish visual inspection and ultrasonic test (UT) inspection of the underwater body hull, freeboard, main deck and bulwarks. Open, clean, ventilate, gas free and maintain dry each tank/void on the vessel. Accomplish visual inspection of interior surfaces of vessel. Accomplish repairs to rubber fenders. Repair manholes covers and assembles. Accomplish tank/void preservation. Accomplish pre-air and final air test of tank/voids.

inspection by the Contractors sitesupervisor, the Consultant, with the input of the State's Representative, will conduct a visual inspection of eachwork area to determine if surfaces are dry, that sufficient removal and cleaning has been competed withminimal residue left on surfaces.

Dock No.2 (major work items):Transport caisson from present dry dock to a floating dry dock or a commercial shipyard that is approved by the Contracting Officer for repairs, and return the caisson to the present dry dock after the repairs.Install silt curtain and debris boom in front of the dry dock opening when the dry dock is filled with water.Perform visual inspection and measuring thickness of steel plates/framing members at whole areas except

Polarization index values shall be in accordance with IEEE Standard 43. 4.11.2 Automatic Transfer Switches 4.11.2.1 Visual and Mechanical Inspection 4.11.2.1.1 Inspect for physical damage. 4.11.2.1.2 Check switch to ensure positive interlock between normal and alternate sources.