DIXIE NF-DIRECT REPLACE EXISTING HOT WATER BOILER, HEATING HOT WATER CIRCULATING PUMPS AND DOMESTIC WATER HEATER BOILER. PER QUOTE #JD21-098. Solicitation ID/Procurement Identifier: 1240LS22C0002 Ultimate Completion Date: Sat Apr 30 17:00:00 GMT 2022
Install line voltage time clocks (Example: Intermatic or equivalent) in the electrical circuit feeding domestic hot water circulating pumps in the Iowa Army National Guard buildings listed in ATTACHMENT A. Vendor will need to splice into existing electrical line and EMT Conduit to add the timer. This bid will be a lump sum for all labor and material to perform this work.
Bid 24-158 – The work at Rebecca M Johnson School includes replacing two (2) existing hot water boilers with new high efficiency condensing boilers, venting and combustion air upgrades, disconnecting and reconnecting boilers, electrical power related to the disconnect and reconnection of the boilers, boiler controls and associated gas piping, plumbing sump pumps, related fire alarm, hot water circulating pumps and sump pumps.
Synopsis is not required in accordance with FAR 5.02(a)(13).CIS Pumps and Motors Services to be performed onboard USS STERETT (DDG-104). Contractor shall provide labor, services, equipment, and materials for the Class B overhaul/repair/rewind services of the No. 2 GTG Sea Water Circulating Pump and Motor unit onboard the USS STERETT (DDG-104).
circulating pumps and motors P-2A & P-2B, and replace facility main domestic water header.
The Chiller scope will involve\nreplacing the (2) water cooled chillers and cooling tower with one 150 ton air cooled chiller installed adjacent\nto the Loading Dock atthe north wing. New chilled water circulating pumps will be utilized and arranged in a\nprimary-secondary arrangement.
The existing chilled water system circulating pumps arelocated in the 2nd floor mechanical room. The new chiller units will be placed atop the existing steelchiller platform structure and the new chilled water system circulating pumps will go on the existinghousekeeping pads in the 2nd floor mechanical room.
