Search results for: water well and pump

Construction of a new water well pump station and related site work. The well pump station building includes a CMU building composed of a pump room, electrical room and chemical room. The pump room will house one vertical turbine pump capable of pumping approximately 1,825 gallons per minute, and all associated electrical equipment including a new PG&E service, switchboard, and standby generator.

WSP 2023 Water Program, Claiborne Street Water Well Repair, Contract No. 23-1988-28 postdate:- 18-Apr-2024 6:00:00 AM CDT responsedate:- 23-May-2024 2:00:00 PM CDT ( 35d, 6h+ ) description:- The City of New Roads will receive separate sealed Bids for WSP 2023 Water Program, Claiborne Street Water Well Repair, Contract No. 23-1988-28. The Work consists of the removal of existing 100 HP motor. 1,000 gpm pump and 150' of column pipe from the well.

Scope of Work of the Contract Documents includes the following: the rehabilitation of remote Well No. 2 including the conversion of electrical facilities from 2400 volts to 480 volts, the replacement of the well pump and motor, replacement of motor control center and construction of MCC building.

The main goals is to abandon the existing non potable water well in place, remove the existing underground storage tank if possible, demolish existing pump house which will include HEMP shielding, piping, and other water distribution system components, construct a new well into the lower Arapahoe aquifer, construct a new 1,000 SF pre-engineered pump house with HEMP equipment protection, construct a tie between the well and the cooling tower sump for

(CST) May 8th, 2024, for the New Seminole Well - Hwy 20 & Cedar Street. The Project consists of construction of a new potable water well including CMU building, one well pump and motor, piping, valves, flowmeter, tablet disinfection system, controls, electrical including a generator set (generator, ATS and HVAC supplied by Owner, installed by Contractor) and sitework.

The well contractor will furnish and install a submersible well pump capable of 50 gpm from 80 feet, along the equipment to conduct a 4-hour pumping test (valving, meter, discharge line, etc.). Water-level data and water quality samples will be collected by the Town’s hydrogeologist.

The well contractor will furnish and install a submersible well pump capable of 50 gpm from 80 feet, along the equipment to conduct a 4-hour pumping test (valving, meter, discharge line, etc.). Water-level data and water quality samples will be collected by the Town’s hydrogeologist.