NRP, POWER RACK INTE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 23 PAGES SPE7M1-23-T-8664 SECTION B PR: 7001188799 NSN/MATERIAL:5998016153636 ITEM DESCRIPTION NRP,POWER RACK INTE RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN

WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) NRP,POWER RACK INTE This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. KATO ENGINEERING INC. 32770 P/N 508-00574-01 CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 7001188799 0001 EA 1.000 NSN/MATERIAL:5998016153636 DELIVERY (IN DAYS):0161 DELIVER FOB: ORIGIN QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: DESTINATION ACCEPTANCE POINT: DESTINATION PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ED INTRMDTE CONT QTY:008 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 23 PAGES SPE7M1-23-T-8664 SECTION B PR: 7001188799 PRLI: 0001 CONT’D ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes. This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station. For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning. For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used. The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705. For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/ If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals. 1. DEVICE SHALL BE CUSHIONED PRIOR TO BEING PLACED IN SPECIFIED BARRIER BAG. 2. COMPRESS BAG GENTLELY TO REMOVE EXCESS AIR. 3. HEAT SEALLED BARRIER BAG. 4. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS AND ESD HANDLING LABEL TO BARRIER BAG. 5. PLACED BAGGED AND MARKED DEVICE INSIDE SPECIFIED UNIT CONTAINER. ZZ - UNIT CONTAINER: SELECT REUSABLE CONTAINER FROM MIL-STD-2073-1E, APPENDIX C FOR THIS PART. CONTAINER NSN IS LISTED AND CAN BE VIEWED ON FLIS AND PURCHASED ON FED MALL. RECOMMEND USING CONTAINER FROM TABLE C.IV (TYPE VI) - FOR CIRCUIT CARDS (CODE: NY). 6. APPLY MIL-STD-129 UNIT CONTAINER IDENTIFICATION MARKINGS AND SPECIAL AMRKNGS TO BOX. ZZ - SPECIAL MARKING REQUIREMENTS: ZZ - ADDITIONAL SPECIAL MARKING: 39 - ESD sensitive electronic device requirements of MIL-STD-129 apply 17 - REUSABLE CONTAINER; 24 - OPEN FOR INSPECTION OR USE ONLY REQUIRED: PER MIL-STD-129, SERIAL NUMBER SHALL BE MARKED ON THE UNIT, INTERMEDIATE, CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 23 PAGES SPE7M1-23-T-8664 SECTION B PR: 7001188799 PRLI: 0001 CONT’D AND SHIPPING CONTAINER LABELS. WHEN SERIAL NUMBER MARKING REQUIRED, THE PACKING LIST SHALL CONTAIN SERIAL NUMBERS PER MIL-STD-129, PARAGRAPHS 5.4.1.1.1, 5.4.1.1.2, 5.4.1.2.1, AND 5.4.1.2.2. . SPECIAL MARKINGS SHALL BE IN ACCORDANCE WITH MIL-STD-129 AND ASTM D5445 (PICTORIAL MARKINGS FOR HANDLING GOODS) TO ENSURE SAFE DELIVERIES. . CONTRACTOR SHALL ENSURE PACKAGE DESIGN IS ADEQUATE FOR SAFE DELIVERIES PER PACKAGE DESIGN VALIDATION PROVISIONS PER MIL-STD-2073-1. PACKAGE DESIGNS FAILING TO MEET THE SAFE DELIVERY REQUIREMENT FOR DOD DELIVERIES ARE ADVISED TO CONSIDER PACKAGE REDESIGN PER ASTM D4169, DISTRIBUTION CYCLE 18(>,)> ASSURANCE LEVEL FOR SPECIFIC DESTINATION, ACCEPTANCE CRITERIA 3 AT NO COST THE GOVERNMENT. SAFE DELIVERY IS MISSION ESSENTIAL AND ALSO A PACKAGE DESIGN PERFORMANCE REQUIREMENT. IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. PARCEL POST ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT FREIGHT SHIPPING ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US Need Ship Date:07/11/2023 Original Required Delivery Date:08/15/2023 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 23 PAGES CONTINUED ON NEXT PAGE SPE7M1-23-T-8664