J

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 24 PAGES SPE4A6-23-T-41YX SECTION A Procurement History for NSN/FSC:011826679/3110 CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material . 5V122 SPE4A613D56380008 550.000 17.90000 20160907 N 5V122 SPE4A613D56380007 47.000 15.27000 20160609 N 5V122 SPE4A613D56380006 69.000 15.27000 20160503 N 5V122 SPE4A613D56380005 75.000 15.27000 20150707 N 5V122 SPE4A613D56380004 40.000 15.27000 20141205 N 5V122 SPE4A613D56380003 71.000 15.27000 20140908 N 5V122 SPE4A613D56380002 68.000 15.27000 20140805 N 5V122 SPE4A613D56380001 27.000 15.27000 20130906 N 04836 SPM4A611MLC62 114.000 13.63000 20110526 N 34087 SPM4A611MGQ33 69.000 13.65000 20110222 N 04836 SPM4A711MV016 30.000 13.59000 20110202 N 34087 SPM4A611MCU30 68.000 13.65000 20101129 N 5V122 SPM4A509V0068 162.000 14.72000 20081009 N 5V122 SPM4M108MC429 43.000 13.68000 20080815 N 3EKG0 SPM4M108M9882P00001 10.000 13.00000 20080612 N 04836

SPM4M107MA381P00001 115.000 16.80000 20070713 N 04836 SP044105MSN37 209.000 9.27000 20050912 N 21335 SP044102MYG13 190.000 5.50000 20020819 N 30842 F0460686G0030SD0700 1594.000 4.40000 19860602 N This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/ CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 24 PAGES SPE4A6-23-T-41YX SECTION B PR: 7004714631 NSN/MATERIAL:3110011826679 ITEM DESCRIPTION j ROLLER,BEARING RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RT001: MEASURING AND TEST EQUIPMENT "CONFIGURATION CONTROL ITEM" UNIT OF ISSUE= PG (10 EACH ROLLERS) HAMILTON SUNDSTRAND CORP. CAGE: 99167 DRAWING: 4004 REV. AG P/N: 4004-6-6-10 ACCEPTABLE SOURCE(S): TIMKEN AEROSPACE CAGE: 21335 MRC BEARINGS CAGE: 38443 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 24 PAGES SPE4A6-23-T-41YX SECTION B FAG BEARINGS LTD CAGE: 36069 SNFA CAGE: F0771 RBC NSK-RHP BEARINGS LTD AEROSPACE DIVISION CAGE: K8455 NTN BEARING CORP OF AMERICA GOVERNMENT SALES DEP CAGE: 0LTL1 IDENTIFY TO: MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY CONFIGURATION CONTROL ITEM IAW CITED DRAWING AND/OR PART NUMBER. DOCUMENTATION REQUIREMENTS OF CLAUSE 52.211-9042 APPLY FOR NEW OFFERORS NOT CITED HEREIN. ITEM IDENTIFICATION IAW MIL-STD-130N, DTD 16-NOV-2012. BEARING RESTRICTIONS: RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011) AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS. A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD. IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS. CRITICAL APPLICATION ITEM SKF USA INC. 38443 P/N 4004-6-6-10 HAMILTON SUNDSTRAND CORPORATION 99167 P/N 4004-6-6-10 NTN BEARING CORPORATION OF AMERICA 0LTL1 P/N 4004-6-6-10 KOYO BEARINGS NORTH AMERICA LLC 5XMS1 P/N 4004-6-6-10 IAW REFERENCE QAP 13873 QAP-B02 REVISION NR B DTD 12/11/2013 PART PIECE NUMBER: CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 7004714631 0001 SE 268.000 NSN/MATERIAL:3110011826679 DELIVERY (IN DAYS):0303 DELIVER FOB: ORIGIN CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 8 OF 24 PAGES SPE4A6-23-T-41YX SECTION B PR: 7004714631 PRLI: 0001 CONT’D QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:0 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT DUE TO ISSUES STILL BEING DISCUSSED, CHANGED ETC, ON MIL-DTL-197J THIS OFFICE RECOMMENDS THAT MIL-P-197H BE USED UNTIL FURTHER NOTICE PRECAUTIONARY MARKINGS PARA 3.6.4 THRU 3.6.8 APPLY PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M. 1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I). 2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT(>,)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY. 3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY. 4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING INSTRUCTIONS... PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M. 1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I). 2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT(>,)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY. 3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY. 4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING INSTRUCTIONS... PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M. CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 9 OF 24 PAGES SPE4A6-23-T-41YX SECTION B PR: 7004714631 PRLI: 0001 CONT’D 1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I). 2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT(>,)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY. 3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY. 4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING INSTRUCTIONS... PARCEL POST ADDRESS: SW3211 DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT FREIGHT SHIPPING ADDRESS: SW3211 DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 US Need Ship Date:08/09/2024 Original Required Delivery Date:09/24/2024 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 24 PAGES CONTINUED ON NEXT PAGE SPE4A6-23-T-41YX