DISK, FILTERING, MICR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 25 PAGES SPE2DH-23-T-0774 SECTION A Procurement History for NSN/FSC:004453662/6635 CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material . 1N3K2 SPE2DS22P2025 163.000 172.00000 20220701 N 1N3K2 SPE2DS22V2601 491.000 164.00000 20220126 N 1N3K2 SPE2DH21V2121 128.000 163.00000 20210714 N 1N3K2 SPE2DH21P2322 115.000 163.00000 20210611 N 1N3K2 SPE2DH21V0291 57.000 161.00000 20201109 N 1N3K2 SPE2DH20P2269 168.000 162.00000 20200909 N 1N3K2 SPE2DH20V3098 53.000 162.00000 20200818 N 1N3K2 SPE2DH20V3083 90.000 162.00000 20200817 N 1N3K2 SPE2DH20P1877 218.000 162.00000 20200626 N 1N3K2 SPE2DH20P1458 377.000 164.00000 20200423 N 0AG09 SPE2DH20P0797 160.000 167.36000 20200116 N 4QNY3 SPE2DH20P0652P00001 103.000 166.50000 20191217 N 1N3K2 SPE2DH20P0191 138.000 167.50000 20191017 N 1WWG5 SPE2DH19P2207 229.000 170.00000 20190729 N 1N3K2 SPE2DH19V2202 76.000 171.50000 20190412 N 1N3K2

SPE2DH19V0356 146.000 142.00000 20181105 N CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 25 PAGES SPE2DH-23-T-0774 SECTION B PR: 7001012778 NSN/MATERIAL:6635004453662 ITEM DESCRIPTION DISK,FILTERING,MICR DISK, FILTERING, MICROPOROUS SHALL HAVE THE FOLLOWING CHARACTERISTICS: NONSTERILE, 37 MM DISK DIAMETER, 9 SQ CM FILTER AREA, FLUID CONTAMINATION MONITOR, 37 MM MIXED CELLULOSE ESTERS, 0.8 UM WHITE WITH PAD, PSI RATING > 50PSI. RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES UNIT OF ISSUE: BOX (BX) OF 50 .. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES .. SPECIFICATION REQUIREMENTS: IF APPLICABLE, ALTERNATIVE OFFER SHALL BE IN ACCORDANCE WITH SPECIFICATION SHEET NO. 1A DATED 28 AUGUST 2008. PRESERVATION, PACKAGING AND PACKING SHALL BE MARKED IN ACCORDANCE WITH COMMERCIAL PRACTICE. SHALL BE TO A DEGREE OF PROTECTION TO PRECLUDE DAMAGE TO CONTAINERS AND/OR CONTENTS THEREOF UNDER NORMAL SHIPPING CONDITIONS, HANDLING AND ETC. EACH UNIT OF ISSUE SHALL BE SUPPLIED IN A SUITABLE SEALED COMMERCIAL CONTAINER. LABELING AND MARKING FOR 6640-00-445-3662 SHALL BE MARKED AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1A. ... CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 0CD82 004453662 REVISION NR 1A DTD 08/28/2008 PART PIECE NUMBER: CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 7001012778 0001 BX 73.000 NSN/MATERIAL:6635004453662 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 25 PAGES SPE2DH-23-T-0774 SECTION B PR: 7001012778 PRLI: 0001 CONT’D DELIVERY (IN DAYS):0010 DELIVER FOB: DESTINATION QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: DESTINATION ACCEPTANCE POINT: DESTINATION PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1E SPECIAL INSTRUCTIONS PRESERVATION, PACKING AND MARKING SHALL BE IN ACCORDANCE W/MIL-STD-2073-1E AS SPECIFIED IN SPECIAL PACKAGING INSTRUCTIONS MPACG00001 REV DATED 03/30/1988 SUPPLEMENTAL INSTRUCTIONS APPLICABLE TO ALL MEDICAL ACQUISITIONS: PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT. EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE. UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER. MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129. COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE APPLICABLE SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS CLAUSE 252.211-7006. HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE CURRENTLY APPLICABLE TO NSNS IN FSCS 6505/6508/6509/6550. MARKING SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1. MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS: UNIT - BAR CODES ARE NOT REQUIRED UNLESS THE UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER. INTERMEDIATE PACKAGE - BAR CODES ARE NOT REQUIRED. EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN(>,)> PIIN AND CAGE) SHALL BE SUPPLIED ON THE CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 8 OF 25 PAGES SPE2DH-23-T-0774 SECTION B PR: 7001012778 PRLI: 0001 CONT’D IDENTIFICATION-MARKED SIDE OF THE CONTAINER. UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE) SHALL BE SUPPLIED ON THE IDENTIFICATION MARKED SIDES OF THE LOAD. NOTES: SEE MEDICAL MARKING STANDARD NO. 1 FOR PLACEMENT OF ALL REQUIRED MARKINGS. BAR CODES SHALL INCLUDE THE HUMAN READABLE INTERPRETATION (HRI). PIIN REFERS TO THE CONTRACT OR ORDER NUMBER, TOGETHER WITH DELIVERY ORDER NUMBER, WHEN APPLICABLE. MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE BAR CODE SYMBOLOGY - HAS BEEN CANCELLED AND REPLACED BY COMMERCIAL BAR CODE STANDARD ISO/IEC 16388 (INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE 39). COPIES OF ISO/IEC 16388 ARE AVAILABLE FOR PURCHASE FROM ANSI, 25 WEST 43RD STREET, NEW YORK, NY 10036, WWW.ANSI.ORG. COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx . CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT TREATMENT OF WPM SHALL BE THE ONLY METHODS AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS. ADDITIONAL INFORMATION REGARDING DOD'S WPM REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/ PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT. PALLETIZATION SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF MIL-STD-147. UNITIZED LOADS COMMENSURATE WITH THE LEVEL OF PACKING SPECIFIED IN THE CONTRACT OR ORDER SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH AND 52 INCHES IN WIDTH. QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE PALLETIZED. APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 9 OF 25 PAGES SPE2DH-23-T-0774 SECTION B PR: 7001012778 PRLI: 0001 CONT’D OF 48 INCHES OR GREATER: IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE ADHERED TO. APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR WIDTH DIMENSIONS: IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR ADDITIONAL GUIDANCE. COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094. COPIES ARE ALSO AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/ PARCEL POST ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT FREIGHT SHIPPING ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US Need Ship Date:12/22/2022 Original Required Delivery Date:03/17/2023 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 25 PAGES CONTINUED ON NEXT PAGE SPE2DH-23-T-0774