The Defense Logistics Agency-Aberdeen, on behalf of the Tank-automotive and Armaments Command (TACOM), intends to acquire spares of the parts listed below to support the AN/TPN-31 Air Traffic Navigation Integration and Coordination System (ATNAVICS). This is a Sources Sought/Request for Information for the potential requirement described below.The current source for these spares is Raytheon Technologies, Marlborough, MA. Raytheon is the original developer and integrator of the ATNAVICS. The government does not possess specifications and/or detailed drawings for the referenced spares. Incorporation of software may be necessary in order to achieve required performance of the spares. The software is the property of Raytheon and is not available for competitive procurement.Spare Parts Information:• Power Supply- 5V/30V/-15V DC (NSN: 6130-01-463-1701; Part Number: G661959-1)• Display Unit (NSN: 7025-01-504-1564; Part Number: D1028558-1)• OPS ECU (NSN: 4120-01-534-4817; Part Number:
H352225-1) Requirements Description:This is a market survey to locate potential sources of supply to supply spares Circuit Card Assewhich are components of the AN/UDR-13. The AN/UDR-13 Pocket RADIAC Set is a compact, lightweight, tactical device used to detect and measure Gamma dose and dose rate from nuclear fallout and Gamma and Neutron from nuclear bursts. The previous manufacturer for this part number (P/N: A3266061) and the cage code was 06442 was Mirion-Canberra.The U.S. Army is seeking to identify vendors with the capability to supply these partsCircuit card Assembly (CCA). The vendors must have extensive knowledge of the AN/ UDR-13 system and also be able to provide at least twenty three (23) of them within a year. The U.S. Army will not provide any test equipment or facilities for this effort.. The following additional NAICS apply: 333314334/334511The Government requires an estimated quantity for this effort as followed:• Quantity: 3 (NSN: 6130-01-463-1701)• Quantity: 2 (NSNs: 7025-01-504-1564, 4120-01-534-4817)5998-01-457-2949)Past performance for these items. The Contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same items for which they have manufacturing experience. Government contract numbers, if applicable, shall be provided. The contractor shall cite the quality standard (either Government or Industry) that shall be in place for this effort. The contractor must provide information to show that they possess, or shall possess, adequate experience, knowledge, production plant facilities (equipment, tooling, and space) to enable them, or their subcontractors, to support this item at the contractor’s best estimated delivery schedule (to include rate per month and number of months lead time from contract award).Requested Response Information:Sources that can manufacture spares of the and provide depot support for the Circuit card Assembly (CCA)parts 5998-01-457-2949 are requested to submit information to show their capability to manufacture or supply depot support for this effort. At a minimum, information submitted should include but is not limited to the following types of documentation: Questionnaire information on previous Government and commercial contracts, and data rights.In your response, please include your company name, CAGE code, and a technical point of contract with email address and telephone number.Notice, Response Due Date, and Points of Contact:This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this SSA or reimburse any costs associated with the preparation of responses to this SSA. This Sources sought announcement (SSA) is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Technical and Competition Advocate Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the Competition Advocate.Please submit responses by 2/17/2023Technical Point of Contact:
michelet.audige.civ@mail.milCompetition Advocate Point of Contact: DLA-Aberdeen –
Bradley.Holtzapple@dla.mil