13--ODA Gear Contract 1 - Rebid

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FBNC23AML0020 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 333517 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids.The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at

target="_blank">www.UnisonMarketplace.com, will end on:2021-08-30 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above.FOB Destination shall be Fort Bragg, NC 28310The MICC End User requires the following items, Brand Name or Equal, to the following:LI 001: Nightforce Flip-Up cap, Eyepeiece, Tan, 25x, 12, EA;LI 002: Proctor Sling The PROCTOR SLING is a very strong yet lightweight, minimalist 2 point adjustable sling that comes with all mounting hardware necessary to attach to a variety of long guns (AR-15, Shotgun, Precision rifles, AK-47, Hunting Rifles etc). The PROCTOR SLING only weighs 2.4 ounces and there is no extra hardware to buy. The PROCTOR SLING comes with everything you need to attach to a variety of guns. This offers huge savings over other slings on the market. The sling is fully adjustable, and excess webbing stores on itself providing a super minimalist sling option for shooters. You won’t find any other like it. The sling is 1 inch wide providing proven all day operational comfort with less bulk. The PROCTOR SLING comes in Black, Marpat Brown, Multicam and Multicam Black. The PROCTOR SLING is 100% made in the USA with Mil Spec and Berry compliant, 30, EA;LI 003: Safari Land 6354DO Holster Right ALS/SLS Mid-Ride Level III Retention Duty Holster. Room for sight and light., 39, EA;LI 004: Safari Land 6354DO Holster Left ALS/SLS Mid-Ride Level III Retention Duty Holster. Room for sight and light., 8, EA;LI 005: TAC-MAG Rare Earth Magnet with pouch. The TacticalTECH TAC-MAG is a handy magnetic retention device that can free up a hand during entries / searches. The strong rare earth magnet can hold a fully loaded shotgun., 60, EA;LI 006: Dewalt 5 in 1 Multi-Tacker Stapler and Brad Nailer Multi-Tool Model #DWHTTR510 This versatile, durable tool can drive five types of fasteners, giving you the ability to take on a range of jobs. You'll get increased flexibility from the high/low power switch, for use with a number of applications. Use the integrated wire guide to fasten wires and cables. Drives 5 different types of fasteners for superior versatility on the jobsite High/low power switch provides increased flexibility for a wide array of applications Integrated wire guide makes fastening cable and wire quick and easy Interchangeable belt clip fits on belts and pockets of both left and right-handed users Uses DEWALT heavy-duty staples DWHTTA700 series, Stanley TRA700 series, or arrow T50 heavy-duty staples up to 9/16 in. (14 mm) in length Lightweight die-cast aluminum housing design for durability Uses Stanley 18-Gauge brads up to 5/8 in. (16 mm) in length Uses Stanley round crown staples CT100 series or arrow T25 series up to 9/16 in. (14 mm) in length Uses Stanley light duty staples TRA200 series or arrow JT21 series up to 3/8 in. (10 mm) in length Uses Stanley flat narrow crown staples CT200 series or arrow T20 series up to 9/16 in. (14 mm) in length Fires narrow crown staples, 3, EA;LI 007: Arrow t50 1/2in staples 1,000 Pack, 7, EA;LI 008: Military 3" Aimpoint Dot Training Target SKU VB-320 500 Pack Designed for the US Military to provide training for rifle, carbine, & pistol. Features 3" circles with 1" square center aiming points.Size: 23" x 35", 8, EA;LI 009: Military 6" Aimpoint Dot Training Target SKU VB-660 Six-6" circles with 1" square center aim point in each circle. Black. 500 Pack Size: 23" x 35., 7, EA;LI 010: Target Pasters-Black 1,000 per box., 3, EA;LI 011: Target Pasters-White 1,000 per box., 3, EA;LI 012: Federal Air Marshal Service Qualification Target (Version 6) SKU: LEAM-6 Pack of 500, 1, EA;LI 013: Man Firing Rifle Terrorist Photo Target SKU: 8RT Pack of 500, 1, EA;LI 014: Man Pointing a Pistol Terrorist Photo Target SKU: 15RT Pack of 500, 1, EA;LI 015: Man w/ Arms Up Terrorist Photo Target SKU: 7RT Pack of 500, 1, EA;LI 016: US Army TRADOC Die Cut Photo Terrorist Target (Version 2) SKU: TRADOC-2 Pack of 500, 1, EA;LI 017: US Army TRADOC Die Cut Photo Terrorist Target (Version 4) SKU:TRADOC-4 Pack of 500, 1, EA;LI 018: US Army TRADOC Die Cut Photo Terrorist Target (Version 7) SKU: TRADOC-7 Pack of 500, 1, EA;LI 019: VTAC Double Sided Tactical Target Pack of 500 PN: VTAC-P, 3, EA;LI 020: Man in Overalls w/ Gun Split Second Target SKU: LE-12 Pack of 500, 1, EA;LI 021: SFAUC-HP Targets. Pack of 500, 1, EA;LI 022: SFAUC-LP Targets. Pack of 500., 1, EA;LI 023: Man w/ Female Hostage Split Second Target SKU-LE-10 Pack of 500, 1, EA;LI 024: VIP Protection Target (Version 4) SKU: VIP-4 Pack of 500, 1, EA;LI 025: Doors Hollow Core 36"x80" with door knob and hinge cut outs., 20, EA;LI 026: Standard Door Knobs, 20, EA;LI 027: Standard Hinges, 40, EA;LI 028: Action Target E-50 Silhouette Steel Target (AT-128) The E-50 Silhouette is the first commercially available target from Action Target capable of handling .50 BMG rounds and is the only steel target on the market made from 1/2" AR550 armor steel. Designed according to U.S. Marine Corps steel target specifications with a 20-degree angled shooting surface and standard military E-type silhouette proportions, this target is made for everything from heavy military firearms training to long-range rifle shooting. With a patent pending stand design that keeps the target grounded even with the biggest of ammunition, you don't need to worry about using sand bags to keep it upright or going downrange to reset it. The E-50 Silhouette's unique design allows the target head to be easily attached without any hardware using convenient bolt handles and slots through which the stand slides. The target head sits loosely on the stand to help absorb impact while providing a reverberating "clang" for instant audible feedback even hundreds of yards away for accurate shots. NOTE: The center stand and feet are made of mild steel and are not intended to withstand the force of a bullet. Shooting the stand and feet may result in damage. Specifications: - Height: 64" - Weight: 146 lbs. - Torso Dimensions: 40" x 19.5" - Steel Grade: 1/2" AR550 - Handgun Shooting Distance: 10 yards+* - Rifle Shooting Distance: 100 yards+*, 8, EA;LI 029: SR-21C Three Bull's-Eye Training Target SKU SR-21C3A The SR-21C3A provides three standard bull's-eye targets stacked vertically on one target sheet allowing for multiple shooting drills without having to go downrange to change out targets. - Ink: Black - Size: 23" x 35" - Bull's-Eye Dimensions: 10.5" x 10.5", 3, EA;LI 030: 10′′ Round Steel Target and T Post Mount 10′′ Round Target and T Post Mount. Target Mounts Directly on to the T Post Mount. Made from Solid 3/8 ̈ AR500 Rated to 30.06 at 100 yards., 20, EA;LI 031: PT Scout Target Circle - 12" (AR550) SKU 801-29174 The PT Scout Rifle-Rated Target Plates are designed with durability and sound in mind. Each plate features a 3/8" thick heavy-duty AR550 steel plate. We provided grade 8 carriage bolts that are hard enough to shed bullets and last longer than other bolts. Should extensive use wear down your plate, it is reversible--easily performed with the 3/4" wrench we built into the foot of the PT Scout stand. With the target mounted to the PT Scout stand and 2x4, projectiles are directed safely and predictably down and away from shooters. The large footprint and balanced center of gravity keep your target upright. For larger calibers or uneven terrain, staking locations are also provided on the PT Scout stand feet. Range Masters and Match Directors can have confidence that they are using the safest steel targets ever produced. Working with the world's best shooters this system is built for the competitive environment and has been proven by shooter's like Max Michel, Rob Leatham and Law Enforcement training agencies. Action Target purchases more AR550 steel than anyone because we build ranges to stop and catch bullets all over the world. Our steel is plasma cut on a water table, reducing heat affected zones. The through bolts and the attached spring steel bracket enhance the sound, dramatically improving hit recognition by shooters and score keepers - making the sound of hits clear from long distances. Changing target heads is simple and easy, requiring no tools on the range. We offer multiple shapes and sizes for every competition and shooter. We proudly provide targets designed for PRS, 3-Gun, IDPA, IPSC, USPSA, SASP, Steel Challenge and many other competitive organizations. Features: - 3/8" AR550 steel - Reversible target plates - Grade 8 Bolts - Multiple shapes and designs - Factory painted target plate - Zinc plated bracket to prevent corrosion and rust - Recommended for rifle calibers up to .308 from 100 yards and beyond - Max recommended muzzle velocity 3000 fps at 100 yards, 14, EA;LI 032: C Zone Steel W/ Hanger, 18, EA;LI 033: GTG Baseline Paper Shooting Target Pack of 100 SKU: SKU: GTGBaseline100 The GTG Baseline Target was designed to give individual shooters, units and agencies an alternative to the classic hitfactor targets which are overwhelmingly being used for daily/weekly training. ​ The GTG Baseline Targets supports a wide variety of standardized drills and tests created by reputable firearms instructors, which can all be found as downloadable PDF files on the DOWNLOAD page. GTG Baseline Targets measure 58x89 cm and are printed on durable 200 g/sqm paper. The GTG Baseline Target is one of the best paper shooting targets for anyone looking for a training solution that offers multiple training scenarios. The shooting target offers both traditional and non-traditional overlays that allow you to run a wide variety of pistol and rifle shooting drills, tests and exercises. - 23 x 35" - Printed in the USA, 3, EA;LI 034: LET Economy Paper Target Stand SKU #ECNO Economy Target Stand. • Can accommodate paper, cardboard or plastic targets/backers up to 25" wide. • Incorporates 2" x 2" wood stick holders. • Target length and height are determined by length of the sticks. • All steel construction., 8, EA;LI 035: Grenade Launcher Holster HK GLM/M320 Retention System Right P/N: GLH-003 All plastic design that mounts onto MOLLE Rubber padding for noise reduction and Secondary Bungee retention system included O-Ring on barrel puck to keep dust and debris out of the grenade launcher barrel Left or Right side versions available Modularity utilizing Gear Retention TrackTM (GRT), 4, EA;LI 036: Grenade Launcher Holster HK GLM/M320 Retention System Left P/N: GLH-003 All plastic design that mounts onto MOLLE Rubber padding for noise reduction and Secondary Bungee retention system included O-Ring on barrel puck to keep dust and debris out of the grenade launcher barrel Left or Right side versions available Modularity utilizing Gear Retention TrackTM (GRT), 4, EA;LI 037: IPSC/USPSA Cardboard Torso Target SKU IPSC-CB IPSC Targets - Official USPSA/IPSC CARDBOARD target.White on one side and brown on the reverse. - Size: 18" x 30", 7, EA;LI 038: M64 Training Frag Body, 32, EA;LI 039: 1LT of CLP, 2, EA;LI 040: NRA 25-Yard Slow Fire Pistol bull's-eye Target (B-16) (Orange Center) HEAVY TAGBOARD PAPER Black and Orange Size: 10 1/2" x 12". Pack of 500., 1, EA;LI 041: 2ft Bungee Cords, 4, EA;LI 042: 4 ft Bungee Cords, 4, EA;LI 043: 6 Ft Bungee Cords, 4, EA;LI 044: 8 Ft Bungee Cords, 4, EA;LI 045: 10 ft Bungee Cords, 4, EA;LI 046: Ratchet Straps 27ft x 2 in heavy duty ratchet straps, 10, EA;LI 047: Dummy Round 5.56, 20, EA;LI 048: Dummy Rd 9mm, 10, EA;LI 049: Mechanix Wear MSV-55-008 : Tactical Specialty Vent Covert Tactical Work Gloves (L, All Black), 8, EA;LI 050: Mechanix Wear MSV-55-008 : Tactical Specialty Vent Covert Tactical Work Gloves (XL, All Black), 6, EA;LI 051: Orange Spray Paint 24oz 12 Pack, 2, EA;LI 052: Jager .223/5.56X45 MAGAZINE SPEED LOADER-BLACK. SKU: SL001 223/5.56x45 Magazine Speed Loader-BLACK. Made from durable engineering-grade nylon polymer, our heat and impact resistant .223/5.56 Magazine Speed Loaders offer a reliable method for speedy re-loads. By simply placing the bottom half of the loader on top of an empty magazine, inserting a loaded stripper clip into that bottom portion then pushing down on the rounds with the magnetic-tipped "plunger", the operator can re-load an empty magazine within seconds. When the operator pulls the plunger out, the magnetic tips extract the now empty stripper clip for future use. REVIEWS DETAILS, 16, EA;LI 053: UpLULA® – 9mm to 45ACP universal pistol mag loader The UpLULA® loader is a military-grade, pocket-size, universal pistol magazine loader and unloader designed to load and unload virtually all* 9mm Luger up to .45ACP single and double stack magazines of all manufacturers. It also loads most .380ACP single and double-stack mags, and 1911’s mags. The UpLULA® loader self-adjusts to the magazine and loads it easily, painlessly, and reliably !, 13, EA;LI 054: The Works Tool Kit Get our Torque Limiter, AR15 Field Maintenance, and Accessory Bits all in one Kit! This kit contains numerous bits and accessories designed to help maintain your AR-15, tighten down your optics and rifle parts to the correct torque, and work on pistols and shotguns as well. Includes the following specialty parts / bits: T-Handle Wrench 65 Inch Lbs miniature torque limiter 45 Inch Lbs miniature torque limiter 25 Inch Lbs miniature torque limiter 15 Inch Lbs miniature torque limiter 1/2" Socket and Bit Adapter Universal Choke Tube Wrench 1911 Bushing Tool Glock Front Sight Bit Mini Pry-Bar Bolt Carrier Group Scraper Metal Pin Punch Castle Nut Wrench Bronze Scraper Steel Pick Non-Marring Plastic Pin Punch Cleaning Brush Bit A2 Front Sight Adjustment Bit Set of Brass Cleaning Rods (can accept 8-32 threaded attachments) Set of two bit adapters to allow for 8-32 threaded components 24 Chrome Plated 1/4" Bits: [hex 2.5mm, 3mm, 4mm, 5mm, .050, 5/64, 3/32, 1/8, 7/64, 9/64, 5/32, 3/16, 1/4] T8, T10, T15, T20, T25, T27, T30, P1, P2, [slotted 3/16, 3/32] Magnetic Patch Soft Carrying Case Soft carrying case has molded in bit holder that is designed to hold any bit / accessory with a standard 1/4" Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component. Be prepared at the Range or in the Field., 3, EA;LI 055: Red Spray Paint 24oz 12 Pack, 2, EA;LI 056: MAG PUL CTR M4 Buttstock FDE Milspec SKU:MAG310 Platform AR10, AR15, M4, M16, M110, SR25 Compatibility Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others* LOP, M4 Collapsed ~10.5 in. LOP, M4 Extended ~13.8 in. LOP Adjustment Range 3.3 in. Length, max 6.9 in. Weight 8.8 oz. Weight, w/ receiver extension 12.8 oz Other Specs *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. If you have a Commercial-Spec extension on your rifle, make sure to order the Commercial-Spec CTR. Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. Friction lock performance may vary depending on the host receiver extension's dimensional tolerances., 3, EA;LI 057: LaRue Tactical Picatinny Riser LT101VFZ SKU: SKU: LT101-VFZ, 36, EA;LI 058: Training Flashbang Body, 44, EA;LI 059: Crye Precision Pouch Zip on Panel S.M, 12, EA;LI 060: Pistol Mag Extenders, ZEV/TARREN, 25, EA;LI 061: Lens Cap for PVS-31 Dual lens, 37, EA;LI 062: ProTimer IV Super Part #: CEI-2300, 8, EA;LI 063: Safe Xtract SX-20000 Vehicle Recovery Kit PN: SX-20000 Contains 7/16" x 60' Winch line (One) 7/16"x60' Wench Line extension (One) 3"x10' Tree Saver (Two) 7/8" x20' Kinetic Recovery Rope 7/16" x 10' Soft Shackle (four) 3/8" x 12' Safety Lanyard (two) Pully Block (one) X-Lock (One) Medium SX Gear Bag (One) Splicing Tool (One) Winch Line Lock (One), 1, EA;LI 064: Dewalt 20V MAX* 9-Tool Combo Kit PN: DCK940D2 DCD771 20V MAX* Lithium Ion 1/2" Compact Drill Driver DCF885 20V MAX* Lithium Ion 1/4" Impact driver DCS381 20V MAX* Lithium Ion Reciprocating Saw DCS393 20V MAX* Lithium Ion Circular Saw DCS355 20V MAX* Lithium Ion Oscillating tool DCL040 20V MAX* Lithium Ion LED work light DCG412 20V MAX* Lithium Ion 4-1/2" Grinder DCR006 20V MAX* Bluetooth Jobsite Speaker DCD740 20V MAX* Lithium Ion 3/8"" Right Angle Drill 3 Year Limited Warranty, 3, EA;LI 065: Dewalt Black and Gold Drill Bit Sets PN: DW1163 135° Split point tip design to help reduce walking High Speed Steel to be used in plastic, wood, and metal Tapered web design for extreme durability and resisting breakage Black and gold coating to help prevent rust and wear 3-Flats shank to reduce spin-out in the chuck* Size markings on the drill bit shank for identifying sizes quickly, 9, EA;LI 066: Collapsable Halligan Tool PN: H-DT-P Halligan head with a Prying Adz and Spike Our Best Selling Halligan Flat Striking Face to Enhance First Hit Response Head is Drop Forged from High Alloy Steel and Heat Treated for Maximum Strength Deep Hard Anodized Coating Light Weight Provides a Tactical Advantage by Reducing Overall Weight Collet Locking Chuck Provides 360° of Gripping Force around the Shaft Premium Quality Ti-6Al-4V Alpha-Beta Titanium Shaft Handle Constructed of High Grade Heat Treated Aluminum Anti Slip Knurl Pattern Cut into the Handle for a Positive Grip Designed and Built by Master Breacher Lanyard Connection in the End Cap Other Unique Proprietary Features used only by Double-Tap, 6, EA;LI 067: Viking Tactics Light Double Tap Hammer Product Code: LDTH-P Our Light Weight hammer is the lightest breaching hammer on the market. It was specifically designed for the Special Operations community where its light weight provides a tactical advantage. Its premium collet chuck locking handle and Ti - 6Al - 4V Alpha-beta titanium shaft ensures that it will stand up to the harsh breaching environment. The head uses our patent pending Double-Tap technology that delivers more impact force into your target and helps to reduce vibration in the handle. This allows the operator to carry a lighter tool, reducing his overall load. The head is constructed of high-grade heat-treated aluminum and has stood up to the abusive tactical breaching environment and has proven to last for a very long time. This is also our best selling hammer., 2, EA;LI 068: Master Pull W4000EX Humvee winch recovery kit The kit includes: 1: 50ft Superline XD® winch extension w/ hook 1: 10ft Super-Yanker® bridle 1: 15ft grade 80 chain w/ CM chain hooks 4: Heavy duty Van Beest shackles 3: Sealed bearing swing blocks 2: Rock guards 1: Carrying bag, 1, EA;LI 069: MAXTRAX MKII Safety Orange PN: MTX02SO Set of 2 The original trademark color: MAXTRAX MKII Safety OrangeTM -the iconic MAXTRAX color. It’s easy to see in almost any condition, and it looks great mounted on any vehicle. Sold as a pair with two leashes to help you pull them out of the muck. Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud. Dimensions: 45 inches long and 13 inches wide. Weight: 8lbs each (Total shipped weight, 17lbs) Height for two stacked: 3.3′′, four stacked: 4.6′′, 3, EA;LI 070: Raptor Combo Connector Demo Clips OTA-312, 950, EA;LI 071: Breachers Tape GE-BT-30ML 30mils Thick - Specially designed extremely aggressive adhesive tape. Breachers Tape® creates an immediate super strong bond between the charge and the target on most all surfaces and most weather conditions, even extreme COLD and WET. It holds where others fail! Breachers Tape adhesive will not absorb any moisture it comes in contact with. Therefore, as long as any moisture between the adhesive and target surface can be "squeezed out" with a little pressure (ie metal, sealed wood, painted surfaces, etc.), Breachers Tape will still bond., 32, EA;LI 072: Gorilla Tape Standard 30yd roll., 80, EA;LI 073: Commercial Electric 7 mil Vinyl Electrical Tape - Black (10-Pack), 8, EA;LI 074: Duck Pro1.88 in. x 60 yds. Silver All-Purpose Duct Tape, 41, EA;LI 075: Husqvarna 967348101 K970 III ACTIVE 16" GAS CUT-OFF SAW SKU:HUS-967348101 Husqvarna 967348101 K970 III ACTIVE 16" GAS CUT-OFF SAW features: Easy to start thanks to Air Purge and decompression valve. The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life. Efficient vibration dampening reduces vibrations to less than 5 m /s2, for more convenient operation. DEX – water-saving wet cutting kit for efficient dust management. Fuel indicator in the tank shows fuel level, to help avoid unnecessary downtime. Husqvarna 967348101 K970 III ACTIVE 16" GAS CUT-OFF SAW specifications: Manufacturer: Husqvarna Model No.: 967348101 Category: Husqvarna Cylinder displacement: 5.71 cu.inch Power output: 6.5 hp Vibrations front handle: 3.1/3.7/2.5 m/s2 Vibrations rear handle: 5.4/4.5/3.5 m/s2 Sound pressure level at operators ear: 104 dB(A) Sound power level, guaranteed (LWA): 114 dB(A) Blade diameter: 12/14/16 " Max cutting depth: 4/5/6", 2, EA;LI 076: Fire Hooks Unlimited WIDE-ADZ Pro Bar Halligan Forcible Entry Tool, 30" SKU: W-FH-WA-PRO30 he Wide-Adz Pro-Bar is a one-piece drop forged tool with an extra 1” added to the 2” adz for a total of 3” in width! This modification makes inward forcible entry a breeze. Great for overhauling debris with the wide adz and extra strike surface. Length: 30”, weight: 13 lbs. Derived from the best selling Pro-Bar Drop forged, one piece alloy steel construction 3” adz Great for forcible entry and overhauling Length: 30”, weight: 13 lbs. The right tool to tackle a hundred critical tasks at the fire scene. Pry, pound, puncture, twist, cut open, or remove all types of barriers between emergency service personnel and endangered lives. Feel confident using this tool to break through doors, locks, and obstructions. Open up ceilings, walls, floors, and moldings with power, speed and effectiveness. Nowhere else in the United States will you find a forcible entry tool quite like the original PRO-BAR and the new WIDE-ADZ PRO BAR. Developed by the Forcible Entry Instructor of the N.Y.F.D. this Halligan-type forcible entry tool was the result of years of research and countless interviews with fire chiefs and firefighters in the F.D.N.Y. and many other large and small departments located in the eastern section of the U.S., 3, EA;LI 077: 1"x2"x8' lumber #2 Grade, 450, EA;LI 078: #9 x 3 in. Philips Bugle-Head Coarse Thread Sharp Point Polymer Coated Exterior Screw (25 lb./Pack) by Grip-Rite, 8, EA;LI 079: 2"x4"x8ft #2 Lumber, 90, EA;LI 080: 1/4" RTD Plywood, 40, EA;LI 081: Klein Tools 5-Piece Torx Screwdriver Set- Cushion Grip Handles Screwdriver Set includes T15, T20, T25, T27 and T30 size tips Screwdrivers have color-coded cushion grip handles for quick ID TORX screwdrivers with corrosion-resistant chrome plated shafts, 7, EA;LI 082: Fiberglass Sickle Stick-Black SKU: GHS-1 Use of an extendable pole to maintain standoff has been used by EOD for decades. This Sickle Stick design came out of the Marine Corps experience in the Helmand province of Afghanistan, where the ability to check ground disturbances from a distance was life saving. The Detonation Technology Fiberglass Sickle Stick provides this capability in a compact and light weight package. The Sickle head uses a unique double sided design that is optimized for different ground types. For soft sand the large single blade will dig in, enabling an operator to find deeper buried items. The Sickle head uses a unique double sided design that is optimized for different ground types. For soft sand the large single blade will dig in, enabling an operator to find deeper buried items. The pole is a light weight but sturdy fiberglass unit that uses a friction lock method. Collapsed length is 25′′, extended length is 159′′, and it weighs 2.25 lbs. The advantage to the operator is less bulk and speed of use. Anything that involves threads or twist-to-lock knobs becomes more challenging to use in the dark and wet under combat conditions. This all is part of the DetTech philosophy of designing tools around the operator on the ground at 0300 in knee deep mud carrying 110lbs of gear., 7, EA;LI 083: HAL-1 Hook and Line Kit Kit includes: (1) Pouch with webbing pocket and 50′ of 1/2′′ webbing. (1) Grapple (DTGH-24) (2) Forceps (1) Remote Pull Grips (1) Hook Knife (HK-4) (2) Mini Breakaway Pulley (BP-4) (2) Three Eye Slings (1) Speed Reel w/100′ of 5/64′′ Line SKU: HAL-1, 7, EA;LI 084: HAL Expansion Kit The HAL Expansion Kit adds capability and versatility to the Hook & Line kit you’re already using. The kit includes: (1) Four Tine Folding Grapple (DTGH-2) (1) Remote Pull Grips (DTVG) (2) Hook Knives (HK-4) (2) Mini Breakaway Pulleys (BP-4), 7, EA;LI 085: Detonation Technologies Snap Hook Made from 7075 Aluminum. Large enough to fit other remote pull tools. Smaller than a climbing carabiner, and eye prevents rotating around on the end of the line. 2-3/8 x 1-1/8 x 3/16, weighs .3 oz. SKU: SH-1, 14, EA;LI 086: Detonation Technologies Compact Non-Contact Probe The non-conductive probe provides more digging ability than a standard round probe, and can be safer to use than a steel knife under some circumstances. These are a consumable item, depending on the soil type and use the tip will wear down over time, so there is no lifetime warranty on the non-conductive probes. 5′′ Blade, 8-7/8′′ overall, 1/4′′ thick, weighs 1.5oz SKU: DK-4, 8, EA;LI 087: 3.25'' Ceramic Blade Folding Knife with TC4 Titanium Handle 6008 CNC machined Titanium handle with polished black ceramic blade. Ambi thumb stud make it friendly to left and right handed. Deep carry tip down pocket clip and lanyard hole make it flexible for different personal carrying preference. Frame lock. Reminder: Ceramic blades are sharp, but they are also fragile due to the high hardness, so they are not suitable for pry, or cut on hard objects. Overall Length: 7.7" Handle Length:4.3" Blade Length: 3.4'' Blade Thickness: 0.087" Net weight:2.5 OZ Package: 3.5 OZ., 12, EA;LI 088: 40MM 12 RD BELT TACTICAL TAILOR, Multicam, 50023-5 Our 40mm Belt will hold 12 rounds of any 40mm ammunition, such as HE, DP, shotshell or Lum rounds. Rounds are held in place by elastic loops and secured by a hook and loop flap. The adjustable belt can be worn around the waist or slung across the body. Available in MultiCam®, Coyote Brown, Black and OD., 4, EA;LI 089: Grip-Rite#2 x 3 in. nails 25lb pack, 1, EA;LI 090: 10 ft. x 10 ft. White Commercial Instant Canopy-Pop Up Tent with Wall Panel by Everbilt Outdoor events such as fairs, farmers markets, craft shows or tailgate parties are better with the Everbilt Commercial 10 ft. x 10 ft. Instant Canopy-Pop Up Tent. It is easy to operate with a central hub for easy 1-hand open and close operation. It's designed to provide great shade and sun-protection to block UV rays. It incorporates a side wall for versatility for up to 12 people to enjoy at any event or activity. The one-piece powder-coated steel frame with push button legs makes for easy height adjustment. The Everbilt 10 ft. x 10 ft. Commercial Instant Canopy is easy to set up, take down, store and transport anywhere with the durable wheeled bag included. 1 removable wall panel included Push button legs allows for easy height adjustment 300D rated top fabric provides great shade and sun-protection for UV rays Water resistant canopy top Versatile commercial design and color great for any business requirements Wheeled bag, guide ropes and stakes included 1-year limited warranty Drain hole design incorporated into the canopy top to minimize water pooling Air vent allows air flow and temperature control, 6, EA;LI 091: STANLEY FATMAX 020800R 4-in-1 Mobile Work Station The Stanley Fatmax 020800R 4-in-1 Mobile Work Station will make a handy addition to a home or shop with its functional design. It has four storage solutions in one, including a tool box, part bin, portable tray and oversized lower bin for larger items. The Stanley mobile work station features a patented, tiered, cantilever multi-level rolling system that allows for easy access to all of the storage areas at the same time. It's made with a durable structural foam construction with extra-large heavy-duty metal latches with a pad lockable eye and heavy-duty rubber-coated 7" wheels for maximum stability. The Stanley 4-in-1 mobile work station provides plenty of options for storing tools and gear. The organizer with removable dividers can be arranged to accommodate small parts and hand tools. Additionally, the spacious and sturdy bottom bin can hold large, heavy items, such as a power tool with room to spare.The portable work station also has a V-groove track on the top of the lid that can help secure lumber, pipe and other materials for easy sawing and cutting. This item features a telescopic handle and heavy-duty wheels for easy maneuverability. For further convenience, a simple pull-up motion of the front latch opens the unit and provides easy access to its contents. When the Stanley Fatmax 020800R 4-in-1 Mobile Work Station is pushed closed, a large front latch locks the unit automatically. Stanley Fatmax 020800r 4-in-1 Mobile Work Station: 4 storage solutions in 1 includes tool box, part bins, portable tray and oversized lower bin for larger items Patented, tiered, cantilever multi-level rolling system allows easy access to all 4 storage areas at the same time Stanley mobile work station has a sturdy structural foam construction Telescopic handle for easy maneuvering Easy latch system includes a quick push-to-close feature Large front latch that locks the entire unit Ball bearing slides for smooth operation, even under heavy loads V-groove on top of lid holds materials, such as lumber and pipes, in place for cutting, 2, EA;LI 092: Pelican 80QT Elite Wheeled Cooler-Tan Pelican Products, Inc. is proud to announce our bear resistant certification from the Interagency Grizzly Bear Committee. The purpose of this certification is to help keep bears safe and significantly reduce bear-human encounters by ensuring that bears do not have access and become conditioned to anthropogenic foods and other bear attractants that increase these encounters. This certification involves intense impact and penetration testing by use of visual inspection, mechanical methods and captive Grizzly Bear testing over extended periods of time. **PelicanTM Elite Coolers are certified bear-resistant by the IGBC under certification numbers 3365, 3366, 3373, 3374, 3375, 3376 Up to 10 days ice retention, freezer grade gasket, 2" polyurethane insulation Press & Pull Latches (Wide for Gloved Use) Integrated Fish Scale on Lid Heavy duty wheels Molded-In handles with built in trolley handle Built-in Bottle Opener Built-in trolley handle with molded-in handles Molded-In Tie Downs Non-Skid & Non-Marking Raised Feet Molded-In Lock Hasp, Stainless Steel Plate Sloped Drain & Tethered Threaded Plug (Garden Hose Attachable) Corrosion Resistant Stainless Steel Hardware Custom Color Program Made in USA, 2, EA;LI 093: YR Tactical® OD - 9 Round Shotgun Pouch-Multicam ENHANCED DESIGN FEATURES: • Holds 9 Shotgun Rounds • Wt: 1.92 oz. • Dim: 2.5” H x 5.25” W x 1.5” D, 6, EA;LI 094: Dewalt 20-Volt MAX XR Cordless Brushless Jigsaw (Tool-Only) The DEWALT DCS334B 20-Volt MAX XR (R) Cordless Jigsaw features an efficient motor for powerful performance and extreme runtime. Precisely control blade speed up to 3,200 SPM with the variable speed trigger and dial, for professional results no matter what you're cutting. This DEWALT Cordless Jigsaw features a 4-position orbital action that lets you adjust for optimal cutting of a variety of materials. A bright LED light illuminates dim work surfaces and makes it easy to follow cut lines. The updated all-metal, lever-action keyless blade clamp is designed for quick and easy blade changes of t-shank jig saw blades. Also keyless, the shoe bevel is easy to adjust with detents at 0, 15, 30, and a positive stop at 45. This brushless jigsaw tool also has a removable shoe cover that helps protect materials from scratches, and an integrated dust blower helps remove dust and debris from your line of sight as you cut. Its lightweight and ergonomic design mean you can make smooth, accurate cuts for longer and with less fatigue. The DEWALT DCS334B Cordless Circular Saw is covered by a 3-year limited warranty for your additional peace of mind. Battery and charger not included. Brushless motor delivers efficient performance for longer runtime (vs. DEWALT DCS331 Jigsaw) Bright LED light helps to illuminate dimly lit work surfaces On/off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm of the scroll saw for easy accessibility Arm design pivots from the back of the scroll saw to the front, shortening the arm movement for smoother, quieter operation No-mar shoe cover to help protect work surface from scratches Compact size for easy grip and maximum control Variable speed trigger and dial provide precise speed control Integrated dust blower helps clear line of sight while cutting All-metal, keyless shoe bevel with detents at 0, 15, 30, and a positive stop at 45 for easy adjustment Accepts t-shank jig saw blades for optimal holding power and professional results, 2, EA;LI 095: Pelican 45QW Elite Wheeled Cooler-Tan Pelican Products, Inc. is proud to announce our bear resistant certification from the Interagency Grizzly Bear Committee. The purpose of this certification is to help keep bears safe and significantly reduce bear-human encounters by ensuring that bears do not have access and become conditioned to anthropogenic foods and other bear attractants that increase these encounters. This certification involves intense impact and penetration testing by use of visual inspection, mechanical methods and captive Grizzly Bear testing over extended periods of time. **PelicanTM Elite Coolers are certified bear-resistant by the IGBC under certification numbers 3365, 3366, 3373, 3374, 3375, 3376 Up to 10 days ice retention, freezer grade gasket, 2" polyurethane insulation Press & Pull Latches (Wide for Gloved Use) Integrated Fish Scale on Lid Heavy duty wheels Molded-In handles with built in trolley handle Built-in Bottle Opener Molded-In Tie Downs Non-Skid & Non-Marking Raised Feet Molded-In Lock Hasp, Stainless Steel Plate Sloped Drain & Tethered Threaded Plug (Garden Hose Attachable) Corrosion Resistant Stainless Steel Hardware Custom Color Program Made in USA, 2, EA;LI 096: 100 FT. 10/3 LIGHTED CGM EXTENSION CORD DXEC14410100 Prevent unwanted disconnects from electrical arcing and loss of power with this 10/3 SJTW extension cord’s revolutionary, patented locking connector. With 100 ft. of cable that extends throughout the jobsite, standard cords connect securely and withstand a pull strength of 80 lbs. from any direction. For added safety, a built-in power indicator light shows power going through the cord, and a continuous ground monitoring (CGM) light indicates that the cord and circuit are safely grounded. With a cold-weather jacket rated at -58°F, you can trust this extension cord to stand up to temperatures well below freezing., 3, EA;LI 097: TYR Tactical® OD - Breaching Tool/Charge Holder ENHANCED DESIGN FEATURES: • Carries one breaching tool • Wt: 5.69 oz. • Dim: 13” H x 3” W x 1.5” D Product Code: TYR-OD800, 2, EA;LI 098: CRAFTSMAN 1000 Series 26.5-in W x 32.5-in H 4-Drawer Steel Rolling Tool Cabinet (Black) Model #CMST22741BK Proudly Made in the USA with Global Materials in Sedalia, Missouri. The 1000 Series 26-1/2-in Wide 4 Drawer Rolling Tool Cabinet is great for any handyman. Arrange all your tools so you can quick and easily locate the tool you need. Get the whole set and you'll get your garage organized in no time. Proudly Made in the USA with Global Materials in Sedalia, Missouri BUILT TO LAST: 20 - 24 ga steel construction is built to last FULL EXTENSION, BALL-BEARING SLIDES: Support 50-lbs of product LOCK AND SWIVEL: 500-lb load rating with 4-in x 2-in casters: two lock and swivel SAFEGUARDS YOUR TOOLS: Internal keyed locking system NON-SLIP MAT: Non-slip open weave top mat protects the surface of the rolling cabinet Has 8,030 cubic inches of storage Assembled Dimensions (WxDxH) 26.5 x 18 x 32.5-in Includes (1) Rolling Tool Cabinet; (1) Set of keys; (1) Caster set, 2, EA;LI 099: CHLK Belt-Multicam Size:34 outer and inner belt The CHLKTM Belt Kit is a revolutionary approach to the modern battle belt – able to act as a low profile pistol belt or a full capacity MOLLE belt kit. CHLK - short for "Combat Helo Load Rated Kit" - was designed and built around the needs of the helicopter assaulters. They needed a belt kit that was super low profile with fewer snag liabilities and load rated to be able to 'clip in' and provide life saving tethering to the aircraft., 6, EA;LI 100: CHLK Belt-Multicam-Size :36 outer and inner belt The CHLKTM Belt Kit is a revolutionary approach to the modern battle belt – able to act as a low profile pistol belt or a full capacity MOLLE belt kit. CHLK - short for "Combat Helo Load Rated Kit" - was designed and built around the needs of the helicopter assaulters. They needed a belt kit that was super low profile with fewer snag liabilities and load rated to be able to 'clip in' and provide life saving tethering to the aircraft., 6, EA;LI 101: TYR Tactical® OD - 6 Round Shotgun Platform Product Code: TYR-OD806- Multicam • Holds 6 Shotgun Rounds • Attaches upright with MOLLE/PALS webbing • Wt: 1.88 oz. • Dim: 5.5” H x 3.25” W, 2, EA;LI 102: Ferro Concepts The Dangler Pouch - Multicam The DanglerTM drop pouch was designed to provide a ‘fanny pack’ add-on to your armor carrier. With help from LEO and Military professionals, we have created a lightweight, durable and flexible tool organizer to ensure you always have what you need for the job at hand. Features: Mix of 1.5" elastic and 3" loop Velcro lining the inside to keep your tools secure pouch. 4"x4" loop for callsign patches or attaching chem light holders. Can be mounted either under the front flap and cummerbund or inserted into your plate pocket on most carriers. Compatible with virtually any armor carrier that has loop Velcro on the front and many plate pockets. Though it is not designed for it originally it can house a 6"x8" soft armor panel/ Made in the USA Berry Compliant, 34, EA;LI 103: Dewalt 15 Amp Corded 7-1/4 in. Lightweight Circular Saw Model #DWE575 The DEWALT 15 Amp 7-1/4 in. Lightweight Circular Saw may be light in weight at only 8.8 lbs. but packs plenty of power with a 15 Amp motor that can handle your toughest applications. Loaded with features that make cutting quick and easy, this saw has a 2-9/16 in. depth of cut capacity for versatile use and an anti-snag, ball-bearing lower guard for smooth guard operation and added durability. The clear line of sight helps give you blade visibility from any angle and with the integrated dust blower, your line of sight is kept clean for easier and more accurate cutting. Ideal for use on the job or for DIY projects or workshop projects, this saw is a breeze to use and built for long-lasting use. 57-degree beveling capacity with stops at 45 degree and 22.5 degree 2-9/16 in. depth of cut capacity provides additional versatility of applications Anti-snag, ball-bearing lower guard provides smooth guard operation and long life in harsh environments Tough cord provides longer durability against cord pull outs Integrated dust blower function cleans the line of sight during cutting Durable high-grade aluminum smooth base for accurate cuts Clear line of sight aids in blade visibility from any angle On-board blade wrench storage for convenient wrench access Includes: 15 Amp 7-1/4 in. lightweight circular saw, carbide tipped 7-1/4 in. blade, blade wrench and instruction manual 3-year limited warranty; 1-year free service contract; 90-day money back guarantee, 1, EA;LI 104: CSWB-2U GOLDEN MINUTE CONTAINER CSWB-2U, Cold Stored Whole Blood 2 Unit Container The Golden Minute Container is an ultra-lite solution that can transport two units of whole blood, dismounted maintaining cold chain for 24 hours, requiring no external power. We have also integrated a Data Logger pocket that allows for internal routing of a temperature probe to eliminate snag hazards. Operationally tested and fielded to USSOCM units and Norwegian SOF. This is a product that Bloodstone members designed starting in 2010. With the help from Pelican BioThermal, COL Miles, COL Strandenes, Dr B. Blankenship, and a year of running the first containers in my pack in Tampa, FL we were able to validate the performance of this new product. Getting two units of cold stored whole blood in a form factor so that it could be carried on target was my goal. Specifications: # of Units of Whole Blood- 2U Temp Control Duration- 24 hrs @4°C (Duration extends with decreased ambient temperature during periods of darkness, Average duration during our field testing was 28-30 hrs) Dimensions: LxWxD-12.25" x 8.75" x 4.5" Weight Empty: 4.2 lbs The Golden Minute Container (GMC) solution is designed for combat medics and is a clinically tested and field test proven container designed to aid in the rescue, evacuation, and stabilization of casualties in austere environments. The Golden Minute Container has been engineered and tested over time in order to protect its payload from the extreme conditions experienced by our armed forces in some of the harshest operating environments on the planet. Rigorous testing and rugged construction has resulted in a product that is dependable, reusable, and light enough for its users to maintain their expeditionary role. The Golden Minute Container can be carried in its own nylon assault carrier, externally on body armor, internally in a Med Bag, and can also be configured to hang on a our PJ Sustainment Panel., 14, EA;LI 105: North American Rescue SQUAD RESPONDER BAG - MULTICAM 80-0932 The Squad Responder Bag from North American Rescue is an alternative to the US Army Combat Lifesaver Bag that sets the bar for mission specific casualty care platforms. By identifying the needs of the end user's skill set, it's innovative storage design is able to capitalize on mobility, versatility and efficiency. Offering a large central compartment and multiple attachment points, the bag maximizes storage space while maintaining a compact profile., 9, EA;LI 106: Viper Flat IFAK, A1, Mini, multicam The evolution of our popular and widely adopted Viper Flat IFAK (Individual First Aid Kit) is here. Originally designed in 2011 as a solution to bulky and in the way IFAKs. A true ambidextrous IFAK that can be worn on your armor carrier, battle belt and duty belt. Make more room up front and affix the Viper IFAK to the rear of your armor carrier or battle belt. • Slimmer more compact than the full size Viper Flat IFAK • Ambidextrous deployment • Flex-Tab attachment system (Patented) • Now compatible with duty / riggers belts carry • Flat design for ultra-thin profile and minimal weight • Folding and overlapping flaps provide maximum utility and versatility • Quick closure for movement with cinch strap • Cinch strap can allow for IFAK to be hung around neck for hands free use • Approximately same thickness as standard plate carrier for low profile • When worn on lower back provides lumbar support • Rides snug and will not dispense without deliberate side force by operator • Front 2 x 2 Velcro® field for cross patch • Overall Dimensions (empty): 5.5" x 6.5" x 1" • Material: 500D Cordura® Nylon • Lifetime Warranty • Made in the USA, Berry compliant • Holds variety of medical kit loadouts (medical contents not included) • Choice IFAK for LAPD SIS, LAPD MCD, Albuquerque Police, Dearborn Police, Sunnyvale Police, Torrance PD, Glendale PD, Anaheim PD, Carmel PD and many others. • Weight: 0.2lbs Product Code: VFIFAK-A1-B, 15, EA;LI 107: MATBOCK R-LIFT GEN 2 AMTC-K1272-OD Introducing the all new Gen2 R-LIFT that maintains all the great features and ease of use of Gen1, but deceases weight and size, and increases abrasion resistance, strength and decontamination capabilities. The R-LIFT is a fully rigid litter that deploys in seconds, weighs only 6 lbs on its own and only 6.5 lbs with the carrying pack. It boasts a maximum load carrying capacity of 400 lbs. The litter is constructed from Ultra High-Density Polyethylene, offering extremely high abrasion resistance and strength, inability to absorb blood, pathogens, chemical or biological hazards, and still decrease weight and size. Additionally, the R-LIFT is now constructed entirely with Kevlar webbing and thread so no part of your stretcher will become contaminated beyond decontamination capabilities. The R-LIFT comes with a built-in inflatable air bladder designed to support the head and align the spine. Additionally, the R-LIFT comes with a replaceable integrated emergency blanket that can be deployed quickly to prevent hypothermia. Lastly, the stretcher offers patient securing straps designed to keep the patient securely attached while moving over rough terrain. Easy and fast to assemble with only 1 person; the R-LIFT is compact for easy storage and transport. The newly designed carrier allows for storage of the R-LIFT either disassembled or partially assembled and a three flap design for quick but secure packing while in the field. Features: - Fully Rigid Litter - Weight with pack – 5.5 lbs - Load Capacity – 400 lbs - Backpack carrying case - Ultra High-Density Polyethylene – high strength, high abrasion resistance, easy to clean Built-in inflatable air bladder to support head and align spine - Patient securing straps - Compact size for easy storage and transport - Integrated replaceable emergency blanket - Simple fast assembly, 4, EA;LI 108: SPIRITUS SYSTEMS Fanny SACK Pouch Mk3- Multicam The "Fanny SACK" bridges the gap between our popular Sub Abdominal Carry Kit and every day carry. Wear it for a full mission profile, or stash your carry gun in it while you're out on the long board. It was designed to make critical equipment easy to access from both sides or when in a confined space like a vehicle. The Fanny SACK can also be worn on the lower back and out of the way but quickly slid around the waist when needed. The pouch features a "half zip" design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured. The front of the pouch features a small zippered stash pocket that is perfect for easy access to small items. The bottom of the pouch features two elastic loops that can be adjusted to hold a tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn't fit your mission needs, you can easily remove and reinstall the loops as necessary. Each side has a webbing loop for attaching equipment such as gloves, carabiners or chem lights. The inside features soft loop Velcro on both sides. This makes the pouch very dynamic, giving you the ability to use our Velcro Insert Suite to fit your requirements. It also features two slide-locks that make it easy to adjust the tension of the elastic loops hanging below, as well as two internal tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch, if submersion occurs. The Fanny SACK is designed to be worn around your waist., 18, EA;LI 109: BloodBoxxTM Tactical SKU: 39-101 WEIGHT: Less than 2lbs DURABLE: 1000 denier shell TIME: 12-24 hours of transport Product Attributes Light weight Low Cube No power requirements Simple reusable system Optimization of thermal management materials Maintains between 1oC and 10oC Designed for 500ml CDPA-1 Whole Blood Bags, 4, EA;LI 110: SAT Antennas AV-2055s AV 2055UHF Satellite Communication (SATCOM) Antenna, 3, EA;LI 111: GETAC Computer Chargers Getac AC Adapter 120 V AC Input MFG. PART: GAAGU5 Product Type: AC Adapter Device Supported: Notebook Input Voltage: 120 V AC Maximum Output Power: 90 W, 11, EA;LI 112: 152 Sat Connectors BNC Female to TNC Female, 50, EA;LI 113: 152 Sat Connectors BNC Female to TNC Male, 50, EA;LI 114: 152 Sat Connectors TNC Male to BNC Female, 50, EA;LI 115: 1000ft of COAX Cable, 1, EA;LI 116: Red ethernet cable 10', 2, EA;LI 117: Green ethernet cable 10', 10, EA;LI 118: Dell - S2421NX 24" IPS LED FHD - AMD FreeSync - VESA - Monitor (HDMI) - Black Model:GX72P Voice Assistant Built-inSpecifications Info info Not Applicable Refresh RateSpecifications Info info 75Hz Maximum ResolutionSpecifications Info info 1920 x 1080 Native ResolutionSpecifications Info info 1920 x 1080 Response TimeSpecifications Info info 4 milliseconds Panel TypeSpecifications Info info IPS Synchronization TechnologySpecifications Info info FreeSync (AMD Adaptive Sync) Screen SizeSpecifications Info info 23.8 inches Number of DVI InputsSpecifications Info info 0 Number of VGA PortsSpecifications Info info 0 Number of HDMI Inputs 2 Number of DisplayPort Ver 1.2 Inputs 0 Number of DisplayPort Ver 1.3 Inputs 0 Number of DisplayPort Ver 1.4 Inputs 0 Number of Mini DisplayPort Inputs 0 Number of Thunderbolt Ports (Total) 0 Number of Thunderbolt 2 Ports 0 Number of Thunderbolt 3 Ports 0 Number of USB 3.0 Type C Ports 0 Number of USB 3.1 Type C Ports 0 General Product Name S2421NX 24" IPS LED FHD - AMD FreeSync - VESA - Monitor (HDMI) Brand Dell Operating System Compatibility Windows, Chrome, Apple iOS, Linux Model Number GX72P Color Black Color Category Black Refresh RateSpecifications Info info 75Hz Maximum ResolutionSpecifications Info info 1920 x 1080 Native ResolutionSpecifications Info info 1920 x 1080 Contrast RatioSpecifications Info info 1000:1 Response TimeSpecifications Info info 4 milliseconds Display Type LED Panel TypeSpecifications Info info IPS Synchronization TechnologySpecifications Info info FreeSync (AMD Adaptive Sync) Aspect RatioSpecifications Info info 16:9 Curved Screen No BrightnessSpecifications Info info 250 candela per square meter Screen SizeSpecifications Info info 23.8 inches High Dynamic Range (HDR)Specifications Info info No Horizontal Viewing AngleSpecifications Info info 178 degrees Vertical Viewing AngleSpecifications Info info 178 degrees Smart DisplaySpecifications Info info No Touch ScreenSpecifications Info info No On-Screen Display LanguagesSpecifications Info info English, French, Canadian, Spanish, Portuguese Connectivity Number of DVI InputsSpecifications Info info 0 Number of VGA PortsSpecifications Info info 0 Number of HDMI Inputs 2 Number of HDMI HDCP 2.2 InputsSpecifications Info info 2 Number of DisplayPort Ver 1.2 Inputs 0 Number of DisplayPort Ver 1.3 Inputs 0 Number of DisplayPort Ver 1.4 Inputs 0 Number of Mini DisplayPort Inputs 0, 6, EA;LI 119: Galaxy S20 Juggernaut Case, - TAN Fits Galaxy S20 – does not fit 20+, 20 Ultra, 20 FE or Note 20 Designed for devices that are already environmentally sealed Same 2M Drop Protection as Juggernaut.Case & SLEEV with lower profile design Top loading design with snap in top cover and removable bottom dust cap Compatible with size SMALL (4.5) mounts, 4, EA;LI 120: IMPCT Cable for galaxy s20 Makes smartphone or tablet the power source Powers attached peripherals while operating as the data host (device does not charge in this configuration - see supporting docs for details) Snap-In USB docking cable assembly replaces bottom dust cap on IMPCT Attaches to IMPCT models (device specific to S20) USB-C docking connector is fully shielded against EMI (not compatible with micro-USB devices) Closed cell foam seal provides environmental seal between case & connector assembly Terminates to a Glenair 804-series connector, 4, EA;LI 121: Juggernaut case PALS Armor Plate Carrier Phone Mount Size: S compatible with Galaxy S20 Designed for missions requiring secure storage and effortless access of communication devices in battlefield environments, the Juggernaut PALS armor plate carrier phone mount secures your Juggernaut phone case and device to a plate carrier. The PALS phone mount connects to the PALS/MOLLE webbing platform on a plate carrier. The PALS mount features an adjustable friction hinge and secondary shock-cord retainer for long-haul stowage. In storage, the mount and phone case (sold separately) present a low yet rugged profile for device protection and accessibility. *Phone Case sold separately (check compatibility for size), Plate carrier and patch not included. Attaches to body armor via PALS/MOLLE webbing platform Adjustable friction hinge Case snaps into mount-arm for 7G resistance Secondary shock-cord retainer for long-haul stowage, 4, EA;LI 122: gofanco Prophecy 1x2 HDMI Extender Splitter Full HD 1080p Over Cat5e/Cat6/Cat7 Ethernet Cable with HDMI Loopout - Up to 50m/165ft - EDID Management, Bi-Directional IR Remote Control (1 in 2 Out) ✔ COMPLETE 1080P KIT - Includes 1 Transmitter & 2 Receivers. Extend and distribute 1 HDMI source to 2 HDMI displays over CAT5e/6/7 simultaneously. Embedded Silicon Image chipset for best quality, compatibility and reliability ✔ HDMI LOSSLESS TRANSMISSION RANGE - Extends HDMI audio/video signals to synchronous output video display(s), is as fluent as direct connection; Supports up to 50m (165ft) at 1080p@60Hz with CAT5e/6/7 and surround sound up to 7.1-channel or stereo digital audio; Compatible with HDCP compliant devices & content. * Good quality CATx cables are essential in delivering quality content ✔ HDMI LOOP-OUT & EDID MANAGEMENT - The transmitter couples as a splitter as it is equipped with an HDMI out port to connect to a local display (5th display) for monitoring purposes or cascade HDMI signals to 4 layers; Easy-to-follow EDID configurations (nine built-in EDID resolution options) via DIP switches allow you to experience audio and video in the highest settings possible based on the capabilities of your display ✔ ADVANCED FEATURES - Bi-Directional IR Remote Control allows you to remotely control a media player/ device from the TV side or control a TV from the device side ✔ EASY INSTALLATION - No driver required; Surface mountable metal housing allows easy placement; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns, please do not hesitate to contact us directly by clicking "gofanco" after "Sold by" then clicking "Ask a question", 5, EA;LI 123: C2G DisplayPor to HDMI, VGA and DVI Adapter - M/F - Video converter - DVI, HDMI, VGA - DVI, HDMI, VGA - black Device Type Video converter Max Resolution 3840 x 2160 Interfaces 1 x DisplayPort input - 20 pin DisplayPort ¦ 1 x VGA output - 15 pin HD D-Sub (HD-15) ¦ 1 x HDMI output - 19 pin HDMI Type A ¦ 1 x DVI-I (dual link) - 24+5 pin combined DVI Enclosure Color Black, 7, EA;LI 124: HDMI Cables 10ft, 10, EA;LI 125: HDMI Cables 15ft, 10, EA;LI 126: HDMI Cables 30ft, 10, EA;LI 127: Invisio Intellicable 2452121 (short cable 1ft), 24, EA;LI 128: ALPHA-NUMERIC IR+GLO CELL TAGTM 2"x4" Multicam C41 / C42 / C43 / C44 / CH1 / CH2 / CH3 / CH4 / CI1 / CI2 / CI3 / CI4 2 of each, 24, EA;LI 129: SUUNTO M-9/BLACK/BLACK/NH WITH VELCRO STRAP THE SIGHTING COMPASS ON THE WRIST The hands -free compass. Suunto attachable compasses are particularly handy, when both hands are needed to get past the next challenge. PRODUCT HIGHLIGHTS Operable in low light with luminescent card Rugged construction, 12, EA;LI 130: Shipping and Handling, 1, EA;Solicitation and Buy Attachments***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price.No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.Wide Area WorkFlow Payment InstructionsPlease address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award.Reporting During Contract PerformanceEqual Opportunity