CONE AND ROLLERS, TAPERED ROLLER BEARING

ORDER FOR SUPPLIES OR SERVICES 1. CONTRACT/PURCH ORDER/AGREEMENT NO. 2. DELIVERY ORDER/CALL NO. 4. REQUISITION/PURCH REQUEST NO.3. DATE OF ORDER/CALL (YYYYMMMDD) 5. PRIORITY 6. ISSUED BY 7. ADMINISTERED BY (If other than 6) 8. DELIVERY FOB CODE CODE 9. CONTRACTOR FACILITY CODE NAME AND ADDRESS 10. DELIVER TO FOB POINT BY (Date) (YYYYMMMDD) 12. DISCOUNT TERMS 13. MAIL INVOICES TO THE ADDRESS IN BLOCK Submit Invoices IAW DFARS 252.232-7003 DESTINATION OTHER (See Schedule if other) 11. X IF BUSINESS IS SMALL SMALL DISAD- VANTAGED WOMEN-OWNED 14. SHIP TO 15. PAYMENT WILL BE MADE BY CODE 16. TYPE OF ORDER DELIVERY/ CALL This delivery order/call is issued on another Government agency or in accordance with and subject to terms and conditions of above numbered contract. PURCHASE Reference your furnish the following on terms specified herein. ACCEPTANCE. THE CONTRACTOR HEREBY ACCEPTS THE OFFER REPRESENTED BY THE NUMBERED PURCHASE ORDER AS IT MAY PREVIOUSLY HAVE BEEN OR IS NOW MODIFIED, SUBJECT

TO ALL OF THE TERMS AND CONDITIONS SET FORTH, AND AGREES TO PERFORM THE SAME. NAME OF CONTRACTOR SIGNATURE TYPED NAME AND TITLE DATE SIGNED (YYYYMMMDD) If this box is marked, supplier must sign Acceptance and return the following number of copies: 17. ACCOUNTING AND APPROPRIATION DATA/LOCAL USE 18. ITEM NO. 19. SCHEDULE OF SUPPLIES/SERVICES 20. QUANTITY ORDERED/ ACCEPTED* 21.UNIT 22. UNIT PRICE 23. AMOUNT * If quantity accepted by the Government is same as quantity ordered, indicate by X. If different, enter actual quantity accepted below quantity ordered and encircle. 24. UNITED STATES OF AMERICA CONTRACTING/ORDERING OFFICER 25. TOTAL 26. DIFFERENCES 27a. QUANTITY IN COLUMN 20 HAS BEEN INSPECTED RECEIVED ACCEPTED, AND CONFORMS TO THE CONTRACT EXCEPT AS NOTED: b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVEc. DATE (YYYYMMMDD) e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 28. SHIP. NO. 29. D.O. VOUCHER NO. 30. INITIALS 32. PAID BY FINAL PARTIAL 33. AMOUNT VERIFIED CORRECT FOR f. TELEPHONE NUMBER g. E-MAIL ADDRESS 36. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT. a. DATE (YYYYMMMDD) b. SIGNATURE AND TITLE OF CERTIFYING OFFICER DD FORM 1155, DEC 2001 37. RECEIVED AT 38. RECEIVED BY (Print) 39. DATE RECEIVED (YYYYMMMDD) PREVIOUS EDITION IS OBSOLETE. 31. PAYMENT COMPLETE PARTIAL FINAL 40. TOTAL CON- TAINERS 41. S/R ACCOUNT NUMBER 42. S/R VOUCHER NO. 34. CHECK NUMBER 35. BILL OF LADING NO. SPE4A6-22-D-5AB1 2022 SEP 16 1000108759 DCMA DAYTON BUILDING 30 AREA A 1725 VAN PATTON DR WRIGHT PATTERSON AFB OH 45433-5302 USA Criticality: Pre-Award Survey : None 60038 4L333 X TIMKEN CORPORATION, THE 4500 MOUNT PLEASANT ST NW NORTH CANTON OH 44720-5450 USA Net 30 days SEE SCHEDULE, DO NOT SHIP TO ADDRESSES ON THIS PAGE DEF FIN AND ACCOUNTING SVC BSM P O BOX 182317 COLUMBUS OH 43218-2317 USA Offer/Quote dated 2022 SEP 12 X 1 $250000.00 See Schedule SPE4A6 S3605A SL4701 DLA AVIATION ASC COMMODITIES DIVISION 6090 STRATHMORE ROAD RICHMOND VA 23237 USA Local Admin: Amanda Leal Tel: 804-279-6712 Email: Amanda.Leal@dla.mil CODE Adobe Professional 8.0 Quinesha Cruz QUINESHA.CRUZ@DLA.MIL 2022 SEP 16 0.000 PAGE 1 OF 23 MARK ALL PACKAGES AND PAPERS WITH IDENTIFICATION NUMBERS IN BLOCKS 1 AND 2. Quinesha Cruz CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 2 OF 23 PAGES SPE4A6-22-D-5AB1 This Indefinite Delivery Contract (IDC) Below the Simplified Acquisition Threshold (SAT) is for a base period of three years. Maximum Total Contract Value is not to exceed $250,000.00 The quantity on the CLIN line should be disregarded. The Minimum and Maximum for the Delivery Orders are noted below and are the correct quantities. NSN 3110-01-391-8140 FOR INFORMATION PURPOSES ONLY: The Guaranteed Minimum of 20 each is applicable to the base period only and will only be applicable for the first year (12 months) of the contract. There is no guarantee that the Government will place any orders after the guaranteed minimum or first 12 months of the base period of the contract/order. The following quantities are applicable to both the base and option periods: Minimum Delivery Order Quantity: 20 each Maximum Delivery Order Quantity: 78 each Pricing: Base Period (Years 1): $1022.00 each Base Period (Years 2): $1063.00 each Base Period (Years 3): $1105.00 each The delivery is 196 days after receipt of order. All deliveries will be FOB DESTINATION. “Ship to” addresses will be identified on each individual delivery order. All deliveries will be within the continental United States. Manufacturing Facilities: CAGE 4L333 THE TIMKEN COMPANY HONEA PATH PLANT 415 BRICK MILL RD HONEA PATH, SC 29654-8741 Supplies- Inspection and Acceptance Address CAGE 4L333 THE TIMKEN COMPANY HONEA PATH PLANT 415 BRICK MILL RD HONEA PATH, SC 29654-8741 Administration Office for Supplies: S3605A DCMA DAYTON AREA A, BUILDING 30 1725 VAN PATTON DRIVE WRIGHT-PATTERSON AFB, OH 45433-5302 Packaging – Inspection and Acceptance Address: CAGE 5RJL1 PARK CITY PACKAGING INC 670 DUNCAN REIDVILLE RD DUNCAN, SC 29334-9520 The following DLA Aviation Acquisition Notices are incorporated by reference. The full-text of the notices can be found at: https://www.dla.mil/Aviation/Business/DAANS/ DAAN-11-01 Notification of Rejection of Award with Technical Data (September 2016) DAAN-47-02 Carrier Tracking Information in Wide Area Workflow (WAWF) (September 2018) CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 3 OF 23 PAGES SPE4A6-22-D-5AB1 SECTION B SUPPLIES/SERVICES: 3110-01-391-8140 ITEM DESCRIPTION: CONE AND ROLLERS, TAPERED ROLLER BEARING RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY SOURCE CONTROL ITEM THE TECHNICAL/QUALITY/TEST REQUIREMENTS FOR CITED P/N WILL BE IN CONFORMANCE WITH THE LISTED DRAWING. OGDEN AIR LOGISTICS CENTER CAGE 98747 DRAWING 9235611 REV G P/N 9235611-75 APPROVED SOURCE(S): TIMKEN CAGE 60038 IDENTIFY TO: BEARING RESTRICTION: RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011) An award can only be made for a bearing manufactured in the United States, its outlying areas, or Canada and the cost of the bearing components (bearing element, retainer, inner race, outer race) manufactured in the United States, its outlying areas, or Canada must exceed 50% of the total cost of the bearing components of that ball or roller bearing. See DFARS Clause 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (Jun 2011). A Contractor's declaration on the domestic/foreign nature of the material being offered is required. To obtain a copy of the "Contractors Declaration Form" please visit the DLA Aviation Foreign Bearing Website at http://www.dla. mil/Aviation/Business/IndustryResources/DLAResourcesforSuppliers/ ForeignBearingWaiver.aspx Please have the completed form ready for submission upon request by the Acquisition Specialist. Failure to provide this information may result in your quote not being considered for award. In the event no offered bearings meet this sourcing requirement, this solicitation may be cancelled and a waiver may be requested by the procurement activity. Upon receipt of an approved waiver, the requirement may be resolicited. See FAR 225.7009-4, Waiver, Restriction on Ball and Roller Bearings (DEC 2010). CRITICAL APPLICATION ITEM TIMKEN CORPORATION, THE 60038 P/N 9235611-75 IAW BASIC DRAWING NR 98747 9235611 REVISION NR G DTD 05/23/2012 PART PIECE NUMBER: CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 4 OF 23 PAGES SPE4A6-22-D-5AB1 SECTION B SUPPLY/SERVICE: 3110-01-391-8140 CONT'D IAW REFERENCE DRAWING NR 98747 9235611 REVISION NR G DTD 05/23/2012 PART PIECE NUMBER: 9235611-75 ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT . 0001 3110-01-391-8140 244.000 EA $ 1,022.00 $ 250,000.00 CONE AND ROLLERS ,TAPERED ROLLER BEARING PRICING TERMS: Firm Fixed Price SUPPLIES/SERVICES: 3110-01-391-8140 Delivery CLIN Price (in days) . 0001 $ 1,022.00 196 QTY VARIANCE: PLUS 0% MINUS 10% INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN FOB: DESTINATION DELIVERY DATE: FOB PAYMENT METHOD: CONTRACTOR PLACE of INSPECTION for SUPPLIES: 4L333 TIMKEN COMPANY, THE 415 BRICK MILL RD HONEA PATH SC 29654-8741 USA PLACE OF PACKAGING: 5RJL1 PARK CITY PACKAGING INC 670 DUNCAN REIDVILLE RD DUNCAN SC 29334-9520 USA PLACE of INSPECTION for PACKAGING: 5RJL1 PARK CITY PACKAGING INC 670 DUNCAN REIDVILLE RD DUNCAN SC 29334-9520 USA PREP FOR DELIVERY: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ADDITIONAL INFORMATION: PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M. 1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I). 2. PARAGRAPH 3.10.2, SELECTION OF UNIT CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 23 PAGES SPE4A6-22-D-5AB1 SECTION B SUPPLY/SERVICE: 3110-01-391-8140 CONT'D PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT(>,)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY. 3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY. 4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING INSTRUCTIONS... GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date . 0001 1000108759 0001 N/A N/A N/A N/A * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION A - SOLICITATION/CONTRACT FORM TECHNICAL REQUIREMENTS THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW- ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. SECTION C - SPECIFICATIONS/SOW/SOO/ORD C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2020) C01 SUPERSEDED PART NUMBERED ITEMS (SEP 2016) C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE MATERIALS OR COMPONENTS (DEC 2016) SECTION D - PACKAGING AND MARKING 252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION (DEC 2019) DFARS (a) Definitions. As used in this clause -- “Advance shipment notice” means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency identification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment. “Bulk commodities” means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines: (1) Sand. (2) Gravel. (3) Bulk liquids (water, chemicals, or petroleum products). (4) Ready-mix concrete or similar construction materials. (5) Coal or combustibles such as firewood. (6) Agricultural products such as seeds, grains, or animal feed. “Case” means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container. “Electronic Product CodeTM (EPC)” means an identification scheme for universally identifying physical objects via RFID tags and other means. The standardized EPC data consists of an EPC (or EPC identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC tags. In addition to this standardized data, certain classes of EPC tags will allow user- defined data. The EPC Tag Data Standards will define the length and position of this data, without defining its content. “EPCglobal®” means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology. “Exterior container” means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container. “Palletized unit load” means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets. “Passive RFID tag” means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive RFID tags that meet the EPCglobalTM Class 1 Generation 2 standard. “Radio frequency identification (RFID)” means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers. “Shipping container” means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION D - PACKAGING AND MARKING (CONTINUED) design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes). (b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that -- (i) Are in any of the following classes of supply, as defined in DoD Manual 4140.01, Volume 6, DoD Supply Chain Materiel Management Procedures: Materiel Returns, Retention, and Disposition: (A) Subclass of Class I - Packaged operational rations. (B) Class II - Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment. (C) Class IIIP - Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives. (D) Class IV - Construction and barrier materials. (E) Class VI - Personal demand items (non-military sales items). (F) Subclass of Class VIII - Medical materials (excluding pharmaceuticals, biologicals, and reagents - suppliers should limit the mixing of excluded and non-excluded materials). (G) Class IX - Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and (ii) Are being shipped to one of the locations listed at https://www.acq.osd.mil/log/sci/RFID_ship-to-locations.html or to -- (A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to -- (B) The following location(s) deemed necessary by the requiring activity: Contract Line, Subline, or Exhibit Line Item Number Location Name City State DoDAAC (2) The following are excluded from the requirements of paragraph (b)(1) of this clause: (i) Shipments of bulk commodities. (ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment Procedures. (c) The Contractor shall -- (1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in paragraph (d) of this clause; (2) Use passive tags that are readable; and (3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-129 (Section 4.9.2) tag placement specifications. (d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPCTM Tag Data Standards in effect at the time of contract award. The EPCTM Tag Data Standards are available at http://www.gs1.org/epc-rfid. (1) If the Contractor is an EPCglobalTM subscriber and possesses a unique EPCTM company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPCTM Tag Data Standards document to encode tags. (2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government Entity (CAGE) code and shall encode the tags in accordance with the tag identifier details located in the DoD Suppliers' Passive RFID Information Guide at http://www.acq.osd.mil/log/sci/ait.html. If the Contractor uses a third-party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable. (3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1). (e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/. (End of clause) SECTION E - INSPECTION AND ACCEPTANCE 52.246-1 CONTRACTOR INSPECTION REQUIREMENTS (APR 1984) FAR https://www.acq.osd.mil/log/sci/RFID_ship-to-locations.html http://www.gs1.org/epc-rfid http://www.acq.osd.mil/log/sci/ait.html https://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://wawf.eb.mil/ CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED) 52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR (a) The Contractor shall comply with the higher-level quality standard(s) listed below. Title Number Date Tailoring ISO 9001 2015 [Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.] (b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in- (1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or (2) When the technical requirements of a subcontract require- (i) Control of such things as design, work operations, in-process control, testing, and inspection; or (ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology. (End of Clause) E05 PRODUCT VERIFICATION TESTING (MAY 2020) (1) Product verification testing (PVT) under this procurement note will only apply when the contracting officer specifically invokes it in writing. The contracting officer may invoke PVT at or after contract award. If the contracting officer invokes PVT at contract award, the contract will explicitly state this testing requirement. If the contracting officer invokes PVT after contract award, the contracting officer shall notify the contractor and the cognizant DCMA ACO. The Government will perform PVT testing at a Government-designated testing laboratory. (2) The contractor shall not ship or deliver any material until it receives notification of the acceptable PVT results, unless the contracting officer directs it to do so in writing The Government will provide the PVT results to the contractor within 20 business days after receipt at the Government testing facility, unless the Government specifies otherwise in writing. (3) The contractor shall provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246-3; and maintain and make available all records evidencing those details if requested by the Government. When the Government finds evidence of risk associated with the contractor's sampling process, the Government may witness and evaluate the contractors sampling process. The contractor shall randomly select samples from the production lot(s), unless the contracting officer specifies otherwise in writing. The contractor shall ship the selected PVT samples with a copy of the system of record receiving report (i.e., WAWF, DD Form 250, or commercial shipping document) and the contractor's signed DD Form 1222. The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, “Product Verification Test Samples - Do Not Post to Stock," Contract Number [ ] and Lot/Item Number [ ]” adjacent to the MIL-STD-129 (latest revision) identification markings. The contractor shall use a hard copy of the system of record receiving report as a packing list, in accordance with DFARS Appendix F. The contractor shall mark the exterior of the shipping container in accordance with MIL-STD129 (latest revision), paragraph 5.11. The contractor shall send samples by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express). The contractor shall include the following in the interior package: (a) Hard copies of the contract; (b) Material certifications/process operation sheets; and (c) Drawings used to manufacture the units and return shipping information. (4) The Government will return samples that pass testing and are not destroyed during evaluation to the contractor at the Government's expense for the contractor to include as part of the total contract quantity to be delivered under the contract. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. If the Government does not return approved samples that pass testing to the contractor, the Government will consider those samples as part of the contract quantity for payment and delivery. (5) If samples fail testing, the Government may reject the entire contract lot from which the contractor took the samples. The Government may, at its discretion, retain samples that fail testing without obligation to the contractor. E06 INSPECTION AND ACCEPTANCE AT SOURCE (JUN 2018) Inspection and acceptance are at source. The place of acceptance is the location where the Government conducts the last inspection before shipment, unless the contractor indicated a different physical location for acceptance below. The contractor shall indicate the location where supplies will be inspected, if different from the production location: CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED) Commercial and Government Entity (CAGE) code: Address: Applicable to contract line item numbers(s) (CLIN(s)): The contractor shall indicate the location where packaging will be inspected, if different from the production location: [ ] Same as for supplies OR CAGE code: Address: Applicable to CLIN(s): The contractor shall indicate the location where supplies will be accepted, if different from the inspection location: Commercial and Government Entity (CAGE) code: Address: Applicable to contract line item numbers(s) (CLIN(s)): SECTION F - DELIVERIES OR PERFORMANCE 52.211-16 VARIATION IN QUANTITY (APR 1984) FAR (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) of this clause. (b) The permissible variation shall be limited to: 0 Percent increase [Contracting Officer insert percentage] 10 Percent decrease [Contracting Officer insert percentage] This increase or decrease shall apply to All Clin(s).* (End of clause) 52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR 52.242-15 STOP-WORK ORDER (AUG 1989) FAR 52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR 52.247-34 F.O.B. DESTINATION (NOV 1991) FAR 52.247-48 F.O.B. DESTINATION - EVIDENCE OF SHIPMENT (FEB 1999) FAR 52.247-58 LOADING, BLOCKING, AND BRACING OF FREIGHT CAR SHIPMENTS (APR 1984) FAR SECTION H - SPECIAL CONTRACT REQUIREMENTS H05 BILATERAL SIMPLIFIED INDEFINITE-DELIVERY CONTRACT (SIDC) (SEP 2021) 252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS (a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract. (b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes: (1) Federal Insecticide, Fungicide and Rodenticide Act; (2) Federal Food, Drug and Cosmetics Act; (3) Consumer Product Safety Act; (4) Federal Hazardous Substances Act; or (5) Federal Alcohol Administration Act. CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION H - SPECIAL CONTRACT REQUIREMENTS (CONTINUED) (c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard. MATERIAL (If None, Insert “None.”) ACT (d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph (c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract. (e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract). (End of clause) SECTION I - CONTRACT CLAUSES 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) DFARS 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (JUN 2020) FAR 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018) FAR 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020) FAR 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR 52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (NOV 2021) FAR 52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES (NOV 2021) FAR (a) Definitions. As used in this clause -- Covered article means any hardware, software, or service that -- (1) Is developed or provided by a covered entity; (2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or (3) Contains components using any hardware or software developed in whole or in part by a covered entity. Covered entity means -- (1) Kaspersky Lab; (2) Any successor entity to Kaspersky Lab; (3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or (4) Any entity of which Kaspersky Lab has a majority ownership. (b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any covered article. The Contractor is prohibited from -- (1) Providing any covered article that the Government will use on or after October 1, 2018; and (2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract. (c) Reporting requirement. (1) In the event the Contractor identifies a covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of https://dibnet.dod.mil CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil. (2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause: (i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable; supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended. (ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles. (d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), including in all subcontracts for the acquisition of commercial products or commercial services. (End of clause) 252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016) DFARS 252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS 252.204-7004 LEVEL I ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS (FEB 2019) DFARS 252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT INFORMATION (OCT 2016) DFARS 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (DEC 2019) DFARS 252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT (MAY 2016) DFARS 52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995) FAR (a) Definition. “Qualification requirement,” as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award. (b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item under this contract or simply a component of an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification. http://quicksearch.dla.mil/qsSearch.aspx (c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided. Offeror's Name: Manufacturer's Name: Source's Name: Item Name: Service Identification: Test Number: (to the extent known) (d) Even though a product or service subject to a qualification requirement is not itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate this contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests. (e) If an offeror, manufacturer, source, product or service has met the qualification requireme nt but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interest, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification. (f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of https://dibnet.dod.mil CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award. (End of clause) 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (NOV 2021) FAR 52.211-5 MATERIAL REQUIREMENTS (AUG 2000) FAR 52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) FAR 52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (OCT 1997) FAR 252.215-7014 EXCEPTION FROM CERTIFIED COST OR PRICING DATA REQUIREMENTS FOR FOREIGN MILITARY SALES INDIRECT OFFSETS (JUN 2018) DFARS 52.216-18 ORDERING (AUG 2020) FAR (a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from Date of Award through Three Years Thereafter [insert dates]. (b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control. (c) If mailed, a delivery order or task order is considered “issued” when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule. (End of clause) 52.216-19 ORDER LIMITATIONS (OCT 1995) FAR As prescribed in 16.506(b), insert a clause substantially the same as follows: (a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than 20 [insert dollar figure or quantity], the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract. (b) Maximum order. The Contractor is not obligated to honor -- (1) Any order for a single item in excess of 78 [insert dollar figure or quantity]; (2) Any order for a combination of items in excess of 78 [insert dollar figure or quantity]; or (3) A series of orders from the same ordering office within THIRTY days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section. (c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum- order limitations in paragraph (b) of this section. (d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within TEN days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source. (End of clause) 52.216-22 INDEFINITE QUANTITY (OCT 1995) FAR As prescribed in 16.506(e), insert the following clause: (a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract. https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2016_5.html https://www.acquisition.gov/sites/default/files/current/far/html/52_216.html https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2016_5.html CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) (b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the “maximum.” The Government shall order at least the quantity of supplies or services designated in the Schedule as the “minimum.” (c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. (d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after 196 Days from Date of Contract Expiration [insert date]. (End of clause) 52.219-28 POST AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (SEP 2021) FAR (a) Definitions. As used in this clause -- Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority. Small business concern -- (1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (d) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity. (2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103. (b) If the Contractor represented that it was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, upon occurrence of any of the following: (1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause if the novation agreement was executed prior to inclusion of this clause in the contract. (2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract. (3) For long-term contracts- (i) Within 60 to 120 days prior to the end of the fifth year of the contract; and (ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter. (c) If the Contractor represented that it was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, when the Contracting Officer explicitly requires it for an order issued under a multiple-award contract. (d) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards, (e) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees if the acquisition -- (1) Was set aside for small business and has a value above the simplified acquisition threshold; (2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or (3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value. (f) Except as provided in paragraph (h) of this clause, the Contractor shall make the representation(s) required by paragraph (b) and (c) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause, or with its offer for an order (see paragraph (c) of this clause), that the data have been validated or updated, and provide the date of the validation or update. (g) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) take the actions required by paragraphs (f) or (h) of this clause. (h) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed: (1) The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code assigned to contract number . (2) [ Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (3) [ Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause. ] The Contractor represents that it [ ] is, [ ] is not a women-owned small business concern. (4) Women-owned small business (WOSB) concern eligible under the WOSB Program. [Complete only if the Contractor represented itself as a women- owned small business concern in paragraph (h)(3) of this clause.] The Contractor represents that -- (i) It [ ] is, [ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (h)(4)(i) of this clause is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The Contractor shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (5) Economically disadvantaged women-owned small business (EDWOSB) concern.[Complete only if the Contractor represented itself as a women- owned small business concern eligible under the WOSB Program in (h)(4) of this clause. ] The Contractor represents that -- (i) It [ ] is, [ ] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (h)(5)(i) of this clause is accurate for each EDWOSB concern participating in the joint venture. [The Contractor shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: .] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (6) [ Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause. ] The Contractor represents that it [ ] is, [ ] is not a veteran-owned small business concern. (7) [ Complete only if the Contractor represented itself as a veteran-owned small business concern in paragraph (h)(6) of this clause.] The Contractor represents that it [ ] is, [ ] is not a service-disabled veteran-owned small business concern. (8) [ Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause. ] The Contractor represents that -- (i) It [ ] is, [ ]is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (h)(8)(i) of this clause is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The Contractor shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. [Contractor to sign and date and insert authorized signer's name and title.] (End of clause) 52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (DEVIATION 2020-O0019) (JAN 2022) FAR (a) Applicability. This clause does not apply to the extent that the Contractor is supplying end products mined, produced, or manufactured in -- (1) Israel, and the anticipated value of the acquisition is $50,000 or more; (2) Mexico, and the anticipated value of the acquisition is $92,319 or more; or (3) Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Italy, Japan, Korea, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, Ukraine, or the United Kingdom and the anticipated value of the acquisition is $183,000 or more. (b) Cooperation with Authorities. To enforce the laws prohibiting the manufacture or importation of products mined, produced, or manufactured by forced or indentured child labor, authorized officials may need to conduct investigations to determine whether forced or indentured child labor was used to mine, produce, or manufacture any product furnished under this contract. If the solicitation includes the provision 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products, or the equivalent at 52.212-3(i), the Contractor agrees to cooperate fully with authorized officials of the contracting agency, the Departmenet of the Treasury, or the Department of Justice by providing reasonable access to records, documents, persons, or premises upon reasonable request by the authorized officials. (c) Violations. The Government may impose remedies set forth in paragraph (d) for the following violations: (1) The Contractor has submitted a false certification regarding knowledge of the use of forced or indentured child labor for listed end products. (2) The Contractor has failed to cooperate, if required, in accordance with paragraph (b) of this clause, with an investigation of the use of forced or indentured child labor by an Inspector General, Attorney General, or the Secretary of the Treasury. CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) (3) The Contractor uses forced or indentured child labor in its mining, production, or manufacturing processes. (4) The Contractor has furnished under the contract end products or components that have been mined, produced, or manufactured wholly or in part by forced or indentured child labor. (The Government will not pursue remedies at paragraph (d)(2) or paragraph (d)(3) of this clause unless sufficient evidence indicates that the Contractor knew of the violation.) (d) Remedies. (1) The Contracting Officer may terminate the contract. (2) The suspending official may suspend the Contractor in accordance with procedures in FAR Subpart 9.4. (3) The debarring official may debar the Contractor for a period not to exceed 3 years in accordance with the procedures in FAR Subpart 9.4. (End of clause) 52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015) FAR 52.222-26 EQUAL OPPORTUNITY (SEP 2016) FAR 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020) FAR 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES - ALTERNATE I (JUL 2014) FAR Notice: The following term(s) of this clause are waived for this contract: [ In subparagraph (a), the phrase “and requires affirmative action by the Contractor to employ and advance in employment qualified individuals with disabilities”; additionally, in subparagraph (a), the phrase “requirements of the equal opportunity clause at 41 CFR 60-741.5(a)” shall be interpreted to exclude in full paragraphs 4-5 and 7 of 41 CFR 60-741.5(a), and the phrase “take affirmative action to employ and advance in employment individuals with disabilities, and to” from paragraph 1 of 41 CFR 60-741.5(a). ] 52.222-50 COMBATING TRAFFICKING IN PERSONS (NOV 2021) FAR 52.222–62 PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (JAN 2022) FAR 52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (FEB 2021) FAR (a) “Hazardous material,” as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract). (b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract. Material (If none, insert None) Identification No. (c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous. (d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Material Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Material Safety Data Sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award. (e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data. (f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property. (g) Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material. (h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows: (1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to -- (i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials; (ii) Obtain medical treatment for those affected by the material; and CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) (iii) Have others use, duplicate, and disclose the data for the Government for these purposes. (2) To use, duplicate, and disclose data furnished under this clause, in accordance with subparagraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data. (3) The Government is not precluded from using similar or identical data acquired from other sources. (End of Clause) 52.223-7 NOTICE OF RADIOACTIVE MATERIALS (JAN 1997) FAR (a) The Contractor shall notify the Contracting Officer or designee, in writing, * days prior to the delivery of, or prior to completion of any servicing required by this contract of, items containing either (1) radioactive material requiring specific licensing under the regulations issued pursuant to the Atomic Energy Act of 1954, as amended, as set forth in Title 10 of the Code of Federal Regulations, in effect on the date of this contract, or (2) other radioactive material not requiring specific licensing in which the specific activity is greater than 0.002 microcuries per gram or the activity per item equals or exceeds 0.01 microcuries. Such notice shall specify the part or parts of the items which contain radioactive materials, a description of the materials, the name and activity of the isotope, the manufacturer of the materials, and any other information known to the Contractor which will put users of the items on notice as to the hazards involved (OMB No. 9000-0107). * The Contracting Officer shall insert the number of days required in advance of delivery of the item or completion of the servicing to assure that required licenses are obtained and appropriate personnel are notified to institute any necessary safety and health precautions. See FAR 23.601(d). (b) If there has been no change affecting the quantity of activity, or the characteristics and composition of the radioactive material from deliveries under this contract or prior contracts, the Contractor may request that the Contracting Officer or designee waive the notice requirement in paragraph (a) of this clause. Any such request shall -- (1) Be submitted in writing; (2) State that the quantity of activity, characteristics, and composition of the radioactive material have not changed; and (3) Cite the contract number on which the prior notification was submitted and the contracting office to which it was submitted. (c) All items, parts, or subassemblies which contain radioactive materials in which the specific activity is greater than 0.002 microcuries per gram or activity per item equals or exceeds 0.01 microcuries, and all containers in which such items, parts or subassemblies are delivered to the Government shall be clearly marked and labeled as required by the latest revision of MIL-STD 129 in effect on the date of the contract. (d) This clause, including this paragraph (d), shall be inserted in all subcontracts for radioactive materials meeting the criteria in paragraph (a) of this clause. (End of Clause) 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (JUN 2020) FAR 252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - BASIC (SEP 2014) DFARS 252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS - ALTERNATE I (SEP 2014) DFARS 252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013) DFARS 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) FAR 252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM - BASIC (JUN 2022) DFARS 252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM — ALTERNATE I (JUN 2022) DFARS 252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022) DFARS 252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY COMPANIES (DEC 2018) DFARS 252.225-7016 RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011) DFARS 252.225-7052 RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, AND TUNGSTEN (OCT 2020) DFARS CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) 52.232-1 PAYMENTS (APR 1984) FAR 52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002) FAR 52.232-11 EXTRAS (APR 1984) FAR 52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014) FAR 52.232-25 PROMPT PAYMENT (JAN 2017) FAR 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (NOV 2021) FAR 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018) DFARS 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018) DFARS (a) Definitions. As used in this clause- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization. “Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). “Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https:// wawf.eb.mil/ (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). Invoice (stand-alone) and Receiving Report (stand-alone) (Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.) (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. See Section B (Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”) (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC See Block 15 Issue By DoDAAC See Block 6 Admin DoDAAC See Block 7 Inspect By DoDAAC See Section B Ship To Code See Section B Ship From Code See Section B Mark For Code See Section B CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) Field Name in WAWF Data to be entered in WAWF Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”) (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system. N/A (Contracting Officer: Insert applicable email addresses or “Not applicable.”) (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. See administrator listed on page 1 (Contracting Officer: Insert applicable information or “Not applicable.”) (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) 252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS 52.233-1 DISPUTES (MAY 2014) FAR 52.233-3 PROTEST AFTER AWARD (AUG 1996) FAR 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) FAR 52.243-1 CHANGES - FIXED PRICE (AUG 1987) FAR 252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) DFARS 52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (JAN 2022) FAR 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JAN 2021) DFARS 52.246-17 WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003) FAR (a) Definitions. As used in this clause. “Acceptance” means the act of an authorized representative of the Government by which the Government assumes for itself, or as an agent of another, ownership of existing supplies, or approves specific services as partial or complete performance of the contract. “Supplies” means the end items furnished by the Contractor and related services required under this contract. The word does not include “data.” (b) Contractor's obligations. (1) Notwithstanding inspection and acceptance by the Government of supplies furnished under this contract, or any condition of this contract concerning the conclusiveness thereof, the Contractor warrants that for One Year From the Last Delivery Order [Contracting Officer shall state specific period of time after delivery, or the specified event whose occurrence will terminate the warranty period; e.g., the number of miles or hours of use, or combinations of any applicable events or periods of time]. (i) All supplies furnished under this contract will be free from defects in material or workmanship and will conform with all requirements of this contract; and CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) (ii) The preservation, packaging, packing, and marking, and the preparation for, and method of, shipment of such supplies will conform with the requirements of this contract. (2) When return, correction, or replacement is required, transportation charges and responsibility for the supplies while in transit shall be borne by the Contractor. However, the Contractor's liability for the transportation charges shall not exceed an amount equal to the cost of transportation by the usual commercial method of shipment between the place of delivery specified in this contract and the Contractor's plant, and return. (3) Any supplies or parts thereof, corrected or furnished in replacement under this clause, shall also be subject to the terms of this clause to the same extent as supplies initially delivered. The warranty, with respect to supplies or parts thereof, shall be equal in duration to that in paragraph (b)(1) of this clause and shall run from the date of delivery of the corrected or replaced supplies. (4) All implied warranties of merchantability and “fitness for a particular purpose” are excluded from any obligation contained in this contract. (c) Remedies available to the Government. (1) The Contracting Officer shall give written notice to the Contractor of any breach of warranties in paragraph (b)(1) of this clause within One Year From the Last Delivery Order [Contracting Officer shall insert specific period of time; e.g., “45 days of the last delivery under this contract,” or “45 days after discovery of the defect”]. (2) Within a reasonable time after the notice, the Contracting Officer may either. (i) Require, by written notice, the prompt correction or replacement of any supplies or parts thereof (including preservation, packaging, packing, and marking) that do not conform with the requirements of this contract within the meaning of paragraph (b)(1) of this clause; or (ii) Retain such supplies and reduce the contract price by an amount equitable under the circumstances. (3)(i) If the contract provides for inspection of supplies by sampling procedures, conformance of supplies or components subject to warranty action shall be determined by the applicable sampling procedures in the contract. The Contracting Officer. (A) May, for sampling purposes, group any supplies delivered under this contract; (B) Shall require the size of the sample to be that required by sampling procedures specified in the contract for the quantity of supplies on which warranty action is proposed; (C) May project warranty sampling results over supplies in the same shipment or other supplies contained in other shipments even though all of such supplies are not present at the point of reinspection; provided, that the supplies remaining are reasonably representative of the quantity on which warranty action is proposed; and (D) Need not use the same lot size as on original inspection or reconstitute the original inspection lots. (ii) Within a reasonable time after notice of any breach of the warranties specified in paragraph (b)(1) of this clause, the Contracting Officer may exercise one or more of the following options: (A) Require an equitable adjustment in the contract price for any group of supplies. (B) Screen the supplies grouped for warranty action under this clause at the Contractor's expense and return all nonconforming supplies to the Contractor for correction or replacement. (C) Require the Contractor to screen the supplies at locations designated by the Government within the contiguous United States and to correct or replace all nonconforming supplies. (D) Return the supplies grouped for warranty action under this clause to the Contractor (irrespective of the f.o.b. point or the point of acceptance) for screening and correction or replacement. (4)(i) The Contracting Officer may, by contract or otherwise, correct or replace the nonconforming supplies with similar supplies from another source and charge to the Contractor the cost occasioned to the Government thereby if the Contractor. (A) Fails to make redelivery of the corrected or replaced supplies within the time established for their return; or (B) Fails either to accept return of the nonconforming supplies or fails to make progress after their return to correct or replace them so as to endanger performance of the delivery schedule, and in either of these circumstances does not cure such failure within a period of 10 days (or such longer period as the Contracting Officer may authorize in writing) after receipt of notice from the Contracting Officer specifying such failure. (ii) Instead of correction or replacement by the Government, the Contracting Officer may require an equitable adjustment of the contract price. In addition, if the Contractor fails to furnish timely disposition instructions, the Contracting Officer may dispose of the nonconforming supplies for the Contractor's account in a reasonable manner. The Government is entitled to reimbursement from the Contractor, or from the proceeds of such disposal, for the reasonable expenses of the care and disposition of the nonconforming supplies, as well as for excess costs incurred or to be incurred. (5) The rights and remedies of the Government provided in this clause are in addition to and do not limit any rights afforded to the Government by any other clause of this contract. (End of clause) 252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013) DFARS 252.246-7007 CONTRACTOR COUNTERFEIT ELECTRONIC PART DETECTION AND AVOIDANCE SYSTEM (AUG 2016) DFARS 252.246-7008 SOURCES OF ELECTRONIC PARTS (MAY 2018) DFARS CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) 252.247-7023 TRANSPORATION OF SUPPLIES BY SEA -- BASIC (FEB 2019) DFARS (a) Definitions. As used in this clause -- “Components” means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor. “Department of Defense” (DoD) means the Army, Navy, Air Force, Marine Corps, and defense agencies. “Foreign-flag vessel” means any vessel that is not a U.S.-flag vessel. “Ocean transportation” means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters. “Subcontractor” means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract. “Supplies” means all property, except land and interests in land, that is clearly identifiable for eventual use by or owned by the DoD at the time of transportation by sea. (i) An item is clearly identifiable for eventual use by the DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination. (ii) “Supplies” includes (but is not limited to) public works; buildings and facilities; ships; floating equipment and vessels of every character, type, and description, with parts, subassemblies, accessories, and equipment; machine tools; material; equipment; stores of all kinds; end items; construction materials; and components of the foregoing. “U.S.-flag vessel” means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States. (b)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract. (2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if -- (i) This contract is a construction contract; or (ii) The supplies being transported are -- (A) Noncommercial items; or (B) Commercial items that -- (1) The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it subcontracts for f.o.b. destination shipment); (2) Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or (3) Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643. (c) The Contractor and its subcontractors may request that the Contracting Officer authorize shipment in foreign-flag vessels, or designate available U.S.- flag vessels, if the Contractor or a subcontractor believes that -- (1) U.S.-flag vessels are not available for timely shipment; (2) The freight charges are inordinately excessive or unreasonable; or (3) Freight charges are higher than charges to private persons for transportation of like goods. (d) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, but the Contracting Officer's failure to grant approvals to meet the shipper's sailing date will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum -- (1) Type, weight, and cube of cargo; (2) Required shipping date; (3) Special handling and discharge requirements; (4) Loading and discharge points; (5) Name of shipper and consignee; (6) Prime contract number; and (7) A documented description of efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of telephone notes, telegraphic and facsimile message or letters will be sufficient for this purpose. (e) The Contractor shall, within 30 days after each shipment covered by this clause, provide the Contracting Officer and the Maritime Administration, Office of Cargo Preference, U.S. Department of Transportation, 400 Seventh Street SW, Washington, DC 20590, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information: (1) Prime contract number; (2) Name of vessel; (3) Vessel flag of registry; (4) Date of loading; (5) Port of loading; (6) Port of final discharge; (7) Description of commodity; CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) (8) Gross weight in pounds and cubic feet if available; (9) Total ocean freight in U.S. dollars; and (10) Name of steamship company. (f) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief -- (1) No ocean transportation was used in the performance of this contract; (2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract; (3) Ocean transportation was used, and the Contractor had the written consent of the Contracting Officer for all foreign-flag ocean transportation; or (4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of the Contracting Officer. The Contractor shall describe these shipments in the following format: * ITEM DESCRIPTION CONTRACT LINE ITEMS QUANTITY TOTAL (g) If this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the Government will reject and return it to the Contractor as an improper invoice for the purposes of the Prompt Payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the Contracting Officer is entitled to equitably adjust the contract, based on the unauthorized use. (h) If the Contractor indicated in response to the solicitation provision, Representation of Extent of Transportation by Sea, that it did not anticipate transporting by sea any supplies; however, after the award of this contract, the Contractor learns that supplies will be transported by sea, the Contractor shall -- (1) Notify the Contracting Officer of that fact; and (2) Comply with all the terms and conditions of this clause. (i) In the award of subcontracts, for the types of supplies described in paragraph (b)(2) of this clause, including subcontracts for commercial items, the Contractor shall flow down the requirements of this clause as follows: (1) The Contractor shall insert the substance of this clause, including this paragraph (i), in subcontracts that exceed the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation. (2) The Contractor shall insert the substance of paragraphs (a) through (e) of this clause, and this paragraph (i), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation. (End of clause) 52.249-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE) (SHORT FORM) (APR 1984) FAR 52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) FAR This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): FAR: https://www.acquisition.gov/?q=browsefar DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html DLAD: http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx (End of clause) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020) FAR (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the clause. (b) The use in this solicitation or contract of any DoD FAR Supplement (DFARS) (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the name of the regulation. (End of Clause) 52.253-1 COMPUTER GENERATED FORMS (JAN 1991) FAR https://www.acquisition.gov/?q=browsefar https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 23 PAGES CONTINUED ON NEXT PAGE SPE4A6-22-D-5AB1 SECTION I - CONTRACT CLAUSES (CONTINUED) 252.204-7016 COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES - REPRESENTATION (DEC 2019) DFARS (a) Definitions. As used in this provision, “covered defense telecommunications equipment or services” has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. (b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered defense telecommunications equipment or services”. (c) Representation. The Offeror represents that it [ ] does, [ ] does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument. (End of provision) L02 ELECTRONIC ORDER TRANSMISSION (JUN 2020) Offerors shall select one of the following alternatives for paperless order transmission: [ ] American National Standards Institute (ANSI) X12 Standards through a value added network (VAN) approved by DLA Transaction Services; or [ ] Electronic mail (email) award notifications containing web links to electronic copies of the Department of Defense (DD) Form 1155, Order for Supplies or Services. Offerors must register on the DLA Internet Bid Board System (DIBBS) (https://www.dibbs.bsm.dla.mil/ ) to receive email notification. If the offeror elects ANSI/VAN order transmission, DLA will send Electronic Data Interchange (EDI) transaction sets at time of award. The contractor shall acknowledge receipt of transaction sets with a functional acknowledgement or order receipt message within 24 hours. If the contractor receives the award transaction set on a weekend or Federal holiday, the contractor shall acknowledge receipt on the next business day. This acknowledgement will confirm that the contractor's interface with the system is working as needed for contract ordering. Offerors can obtain information regarding EDI, ANSI X12 transactions, and VANs approved by DLA Transaction Services at Defense Automatic Addressing System (DAAS) Value Added Network List (https://www.transactionservices.dla.mil/daashome/edi-vanlist-dla.asp). Offerors should direct questions concerning electronic ordering to the appropriate procuring organization point of contact below: DLA Land and Maritime, Helpdesk.EBS.L&M.LTCs@dla.mil DLA Troop Support, dlaedigroup@dla.mil DLA Aviation, avnprocsysproceddiv@dla.mil, phone # 804-279-4026 C14 CORRECTION OF NONCONFORMING PACKAGING OR MARKING (MAY 2020) 252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2021) DFARS 252.225-7048 EXPORT CONTROLLED ITEMS (JUN 2013) DFARS 252.225-7051 PROHIBITION ON ACQUISITION OF CERTAIN FOREIGN COMMERCIAL SATELLITE SERVICES (SEP 2021) DFARS 252.239-7098 PROHIBITION ON CONTRACTING TO MAINTAIN OR ESTABLISH A COMPUTER NETWORK UNLESS SUCH NETWORK IS DESIGNED TO BLOCK ACCESS TO CERTAIN WEBSITES – REPRESENTATION (DEVIATION 2021-O0003) (APR 2021) (a) In accordance with section 8116 of Division C of the Consolidated Appropriations Act, 2021 (Pub. L. 116-260), or any other Act that extends to fiscal year 2021 funds the same prohibitions, none of the funds appropriated (or otherwise made available) by this or any other Act for DoD may be used to enter into a contract to maintain or establish a computer network unless such network is designed to block access to pornography websites. This prohibition does not limit the use of funds necessary for any Federal, State, tribal, or local law enforcement agency or any other entity carrying out criminal investigations, prosecution, or adjudication activities, or for any activity necessary for the national defense, including intelligence activities. (b) Representation. By submission of its offer, the Offeror represents that it is not providing as part of its offer a proposal to maintain or establish a computer network unless such network is designed to block access to pornography websites. (End of provision) 52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021) FAR 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) FAR SECTION J - LIST OF ATTACHMENTS List of Attachments https://www.acq.osd.mi l/dpap/dars/dfars/html/current/252204.htm https://www.sam.gov/ https://www.dibbs.bsm.dla.mil/ https://www.transactionservices.dla.mil/daashome/edi-vanlist-dla.asp https://www.transactionservices.dla.mil/daashome/edi-vanlist-dla.asp https://www.transactionservices.dla.mil/daashome/edi-vanlist-dla.asp CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 23 OF 23 PAGES SPE4A6-22-D-5AB1 SECTION J - LIST OF ATTACHMENTS (CONTINUED) Description File Name ATTACH_SIGN Page 1 SignedQC.pdf