Pelco Cameras Plus Install

Building 1206 Bays 7 and 8 Camera SystemStatement of Work1 October 2019 Scope of WorkThe scope of work for this project includes the purchase and installation of 4 Pelco explosion proof pan-tilt­ zoom (PTZ) cameras to be installed in Building 1206 and integrated into the existing Pelco Digital Sentry video encoders and recorders. Two cameras will be installed in Bay 7 and two cameras will be installed in Bay 8. These cameras are both a safety and security requirement and will be utilized to remotely monitor explosive machining operations. The vendor shall include in their quote all necessary equipment required to complete the installation, e.g., cameras (with housings), screens, controls, and all associated wiring and connections as outlined below, in addition to the labor costs associated with physical installation of the cameras.  Location of WorkThe cameras will be installed in Bays 7 and 8 of Building 1206. All wiring must be routed back to the control room in the same building.Ill.Period of PerformanceThe anticipated period of performance is 45 days after notification of award.Deliverables ScheduleThe following table contains the deliverables for the project. Since the duration of the project is short, these deliverables will be due prior to acceptance testing.(SEE ATTACHED SOW FOR TABLE)Applicable StandardsDue to the electrical hazard classification of the building and operating bays, all work performed under this contract will comply with National Electric Code (NEC) standards for Division 1, Class 1.Acceptance CriteriaUpon completion of the project, the cameras will be tested for functionality to the satisfaction of AFRL/RWMEP.VII Special RequirementsNot