AIR CONDITIONER

SOLICITATION NOTES:EVALUATION FACTORS:Evaluation Utilizing Simplified Acquisition ProceduresThe Government will issue an order resulting from this Request for Quotationto the responsible offeror whose quotation results in the best value to theGovernment, considering both price and a non-price factor. The followingfactors will be used to evaluate quotations:1) Price.2) Past Performance. The offeror's past performance on related contracts willbe evaluated to determine, as appropriate, successful performance of contractrequirements, quality and timeliness of delivery of goods and services, costmanagement, communications between contracting parties, proactive management,and customer satisfaction.a. With reference to DFARS 252.213-7000, past performance data containedwithin SPRS will be used to evaluate an offeror's past performance.b. Specifically, past performance data based on federal supply class (FSC)and product service code (PSC) 4020 will be considered.c. In the case of an offeror

without a record of relevant past performancehistory in SPRS for FSC/PSC 4020, the offeror will not be evaluated favorablyor unfavorably for its past performance history.INSPECTION AT ORIGINACCEPTANCE AT ORIGINPOC EMAIL: STEPHANIE.R.PEREZ1@NAVY.MILRouting Data TableField Name in WAWF Data to be entered in WAWFPay Official DoDAAC ( )Issue By DoDAAC ( )Admin DoDAAC ( )Inspect By DoDAAC ( )Ship To Code ( )Ship From Code ( )Mark For Code ( > )Service Approver (DoDAAC) ( > )Service Acceptor (DoDAAC) ( )Accept at Other DoDAAC ( > )LPO DoDAAC ( > )DCAA Auditor DoDAAC ( > )Other DoDAAC(s) ( > )1. SCOPE1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirementsfor the AIR CONDITIONER .2. APPLICABLE DOCUMENTS2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order includingmodifications or exclusions.2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as anattachment to this contract/purchase order.3. REQUIREMENTS3.1 Cage Code/Reference Number Items - The AIR CONDITIONER furnished under thiscontract/purchase order shall be the design represented by Cage Code(s)reference number(s). Cage _______ ref. no.1F0X7 CR290426G054>3.2 Marking - This item shall be physically identified in accordancewith .3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed asprovided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH ContractingOfficer has notified and approval has been given by issuance of a written change order. When any change in design,material, servicing or part number is made to replace or substitute any item to be furnished on thiscontract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and anexplanation of the reason for the change, explaining the reason therefor. If finished detail drawings are notavailable, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. Whennotifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall beindicated by code number in accordance with one of the following statements:Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts areidentical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number.Code 2: Assembly (or set or kit) not furnished - Used following detail parts.Code 3: Part not furnished separately - Use assembly.Code 4: Part redesigned - Old and new parts are completely interchangeable.Code 5: Part redesigned - New part replaces old. Old part cannot replace new.Code 6: Part redesigned - Parts not interchangeable.5. PACKAGING5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be inaccordance with the Contract/Purchase Order Schedule and as specified below.MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULEPRESERVATION, PACKAGING, PACKING AND MARKINGThe contractor shall preserve, package, pack and mark all items as cited below. Where specifications or standards arecited herein the latest revision of that specification or standard shall apply.1. PRESERVATION REQUIREMENTSa. SYSTEM STOCK SHIPMENTS - The contractor shall preserve all items intended to enter the military distributionsystem for stock in accordance with the MIL-STD-2073-1, "Standard Practice for Military Packaging", PackagingRequirements Code specified in the Schedule. When a Specialized Preservation Code/Method of Preservation (MOP)(Table J-Ia) is specified, and one or more of the following packaging fields (WM, CUD, CT, UC) value is a 00(numeric), the Specialized Preservation/MOP procedure and materials takes precedence. Contractors should disregardthe LP field and third digit of the PACK field and use the Unit Container Level (UCL) to identify the level ofpacking protection the unit container meets for packing requirements. When HM = D, the item is regulated inaccordance with Title 49 Code of Federal Regulations (CFR); when HM = N the item is not regulated for transportation.1) When a specified packaging material has an associated Qualified Products List (QPL), the contractor shall useonly packaging materials produced by a manufacturer listed on the applicable QPL. Barrier materials that have QPLsare MIL-PRF-131, MIL-PRF-81705, MIL-PRF-22191, MIL-PRF-3420 and MIL-PRF-22019. Sources for QPL material can beobtained from the Qualified Products Database at http://qpldocs.dla.mil/.b. IMMEDIATE USE/INSTALLATION AND PART NUMBER BUY SHIPMENTS - Government PCO or ACO approval is required to usethe packaging standards outlined in this paragraph. Any national stock numbered (NSN) item required for immediateuse (used or consumed within 7 days of receipt) or direct installation, or part numbered item (authority granted toship without NSN) shall be preserved and packed in accordance with ASTM D3951, "Standard Practice for CommercialPackaging", for all shipments to a Continental United States (CONUS) government activity or contractor-ownedfacility. All material destined for overseas shipment (OCONUS) shall be preserved in accordance with MIL-STD-2073-1.c. GOVERNMENT-OWNED MATERIAL - In the event that the contract expires, is terminated, or completed, andGovernment-owned material is to be returned to the supply system, the contractor shall preserve and package thismaterial in accordance with the requirements of paragraph 1.a.2. PROTECTION FROM DEGRADATION DUE TO ELECTROSTATIC (ES)/ELECTROMAGNETIC (EM) FORCESa. When ASTM D3951 is authorized for packaging and the item is considered ESD Sensitive (ESDS), protection shallbe in accordance with ANSI/ESD S20.20-2014, "For the Development of an ESD Control Program for - Protection ofElectrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices)."b. When MIL-STD-2073-1 is specified and the preservation method code (PMT) in the solicitation does not specifyESD/EM protection (PMT = GX) and the contractor's proposed item of supply is subject to degradation from ES/EMforces, contractors shall provide recommended packaging data with their proposals/quotes.3. PACKING REQUIREMENTS - The contractor shall pack as follows:Domestic Shipments (CONUS): Level BOverseas Shipments (OCONUS) (including Navy ships at sea):Via air, FPO, APO Level BVIA freight forwarder Level BVia surface Level AWSSTERMDZ03 (CONT)PRESERVATION, PACKAGING, PACKING AND MARKINGExterior shipping containers for Packing Levels A and B are listed in MIL-STD-2073-1, Appendix C, Table C.II.Long-life reusable containers and wood containers are shipping containers which do not require overpacking forshipment.4. MARKING REQUIREMENTS - All unit, intermediate and shipping containers shall be marked in accordance withMIL-STD-129. In addition, the following specific requirements apply:a. ADDITIONAL MARKING FOR SPARES ONLY - Each MIL-STD-129 label shall also include the following:1) Procurement Instrument Identifier (PIID) - the 13-digit contract order number,2) Contract Line Item Number (CLIN) - the 4-digit individual line item number (e.g. 0001, 0002, etc.), and3) SubCLIN - the 6-digit sub line item number (e.g. 0001AA, 0001AB, 0002AA, 0002AB, etc.).b. DEPOT LEVEL REPAIRABLE (DLR) LABELS1) Items identified with a Cognizance (COG) Code of either "7" or an even number preceding the NSN, excluding6A, 6H and 6X COGs (e.g. 7RH 5826-014289999), are defined as Depot Level Repairable (DLR) items. DLR items requirethat a DLR label be placed on the outside of the unit, intermediate and shipping containers as close to the bar codelabel as possible.2) Labels are available via the Naval Forms Online website: https://forms.documentservices.dla.mil/order/.The website will advise the procedures for ordering and establishing an account.3) NAVSUP WSS authorizes contractors to create and print their own DLR labels. Labels shall follow thestandard size and font options listed in below chart. Text shall be in all upper case letters of the same stylefont. The label used shall be sized proportionate to the size of the container. Labels shall be horizontally printedand consist of yellow "DLR" text font on a solid blue background. Labels shall meet requirements of MIL-STD-129section 4.2.2. Labels shall be of a water-resistant grade of paper, film, or plastic, coated on one side withwater-insoluble, permanent type adhesive. The adhesive shall adhere to metal, plastic, aluminum or fiberboardsurfaces under high and low temperatures. Labels shall have a finish suitable for printing and writing on with inkwithout feathering or spreading, be capable of withstanding normal handling and storage conditions, and remainsecurely in position. Application specific performance criteria and durability requirements to ensure functionalityin various climatic environments should be tailored, if required, using MIL-PRF-61002. MIL-PRF-61002 can be used asan acquisition tool when labels presently being used are not performing satisfactorily or when new conditions orapplications require special label stock for those particular situations.-----------------------------------------------------------------------NSN DESCRIPTION QUANTITY APPLICATION FORM NUMBERPER UNITPACKAGE-----------------------------------------------------------------------0108LF5055300 DLR Label 100 Unit NAVSUP 1397-12in.x3in. Container-----------------------------------------------------------------------0108LF5055000 DLR Label 100 Intermediate NAVSUP 13973inx5in. ShippingContainer-----------------------------------------------------------------------c. SPECIAL MATERIAL IDENTIFICATION CODE (SMIC) FOR NAVSUP WSS MARITIME REQUIREMENTS ONLY1) Certain Program-related items are identified by a two-position SMIC, which appears as a suffix to the NSN(e.g. 1H 4730 009001317 L1), and require special markings. Containers shall be marked with letters, maximum twoinches high on two (2) sides and two (2) ends as follows:--------------------------------------------------------------------------SMIC MARKINGS COLOR TYPE CONTAINER--------------------------------------------------------------------------L1 LEVEL 1 RED Unit, intermediate and shipping(size permitting)--------------------------------------------------------------------------S1 SURFACE RED Unit, intermediate and shippingLEVEL 1 (size permitting)--------------------------------------------------------------------------D4/D5/D7 DSS-SOC RED Unit, intermediate and shipping(size permitting)--------------------------------------------------------------------------C1* LEVEL 1 SPECIAL Green Unit, intermediate and shippingCLEAN 02-N2--------------------------------------------------------------------------CP/VG* SPECIAL CLEAN GREEN Unit, intermediate and shipping02-N2--------------------------------------------------------------------------D0/D6/D8* DSS-SOC Green Unit, intermediate and shippingSPECIAL CLEANWSSTERMDZ03 (CONT)PRESERVATION, PACKAGING, PACKING AND MARKINGO2-N2--------------------------------------------------------------------------VU FBW SFCC VU BLUE Unit, intermediate and shipping(size permitting)--------------------------------------------------------------------------SW FBW SFCC SW BLUE Unit, intermediate and shipping(size permitting)--------------------------------------------------------------------------Q3/Q5 Q3 or Q5 RED Unit, intermediate and shipping--------------------------------------------------------------------------*denotes Oxygen Clean requirements in accordance with MIL-STD-1330 "Precision Cleaning and Testing of ShipboardOxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen Systems."5. PALLETIZATION. Palletization of shipments shall be accomplished in accordance with MIL-STD-147 "DOD StandardPractice: Palletized Unit Loads." Failure to meet these palletization/packaging requirements and measures, withouta written waiver from the PCO or ACO, may result in charges back to the contractor for repalletization and/orrepackaging of items. Pallets shall conform to the requirements of American National Standards Institute, MaterialHandling-MH1-2016, Pallets, Slip Sheets, and Other Bases for Unit Loads. MH1-2016 may be obtained at the followingwebsite: http://www.mhi.org.a. General Purpose Unit Loads - When shipping directly to a Navy afloat unit, pallets meeting MH1-2016, Part No.MH1/9-02SW4048 or MH1/9-10BW4048 for unit loads under 1,500 pounds and MH1/9-03SW4048 for unit loads over 1,500pounds shall be used.b. Hazardous Material Unit Loads - Unless otherwise specified in the contract or purchase order hazardous materialcontainers, except cylinders and 55 gallon drums, shall be palletized utilizing MH1-2016 Part No. MH1/9-07S W4848pallets.c. Use of nonstandard commercial pallets is prohibited.6. WOOD PACKAGING MATERIAL (WPM). All shipments destined to the DOD must be treated and marked in accordance withthe International Standards for Phytosanitary Measures Guidelines for Regulating Wood Packaging Material inInternational Trade (ISPM 15) for OCONUS shipments.a. For all WPM furnished under this contract the contractor shall ensure the American Lumber Standards Committee(ALSC) approved mark is applied to every shipment regardless of destination.b. Failure to comply with the requirements of ISPM 15 may result in refusal, destruction or treatment of WPM atthe point of receipt and the associated costs charged back to the contractor.7. NAVY SHELF-LIFE PROGRAM. Navy shelf-life requirements are listed under the item description in a 3-digitalpha/numeric code. Position one (1) is the DOD shelf-life code, defining the type of shelf-life for an item (TypeI, non -extendible or Type II, extendible), and the number of months an item can remain ready for issue in a Navyspecified package. Positions two (2) and three (3) combined form the Navy-unique shelf-life action codes used bystorage activities, and do not impose any requirements on the contractor. The contractor shall use the applicableshelf-life paragraphs and table in MIL-STD-129 to apply either Type I or Type II shelf-life markings to an item'sunit, intermediate and shipping containers. Contractors will ensure that at least eighty-five percent (85%) of theNavy shelf-life requirement is remaining when received by the first government activity.8. REUSABLE NSN CONTAINERS. An item that has an NSN assigned in the "Container NSN" field (e.g . 8145 012622982)requires shipment in a reusable shipping and storage container.a. REUSABLE CONTAINERS FOR NAVSUP WSS, MARITIME REQUIREMENTS - Reusable NSN containers for maritime material(designated by a COG Code of "7E", "7G" and "7H") shall be provided as contractor-furnished material (CFM).b. REUSABLE CONTAINERS FOR NAVSUP WSS, AVIATION REQUIREMENTS - Reusable NSN containers (excluding fiberboard andmost wood) for aviation material (designated by a COG Code of "7R", "6K" or "0R") shall be provided asgovernment-furnished material (GFM). Fast pack containers will not be provided as GFM. To obtain GFM reusablecontainers, the contractor must submit the Container Request Form available athttps://www.navsup.navy.mil/site/public/wss/documents/business_opps/local_clauses_contracts/container_request_form.pdf. Email the completed form to NAVSUPCRF.fct@navy.mil at least 90 days priorto the anticipated shipping date (monthly for repair contracts). If the Navy's Container Management Area (CMA)informs the contractor that containers are unavailable, the following alternate packaging requirements apply. Theunavailability of reusable containers shall not be an excusable delivery delay.ALTERNATE PACKAGING REQUIREMENTS FOR ITEMS ASSIGNED THE FOLLOWING CONTAINERS--------------------------------------------------------------------------Container Container Alternate Packaging CodeNSN Part Number (80132) IAW MIL-STD-2073-1--------------------------------------------------------------------------8145 002609548 P069-2 }-----------------------------------------}8145 002609556 P069-1 } GX10000LTBED-----------------------------------------}WSSTERMDZ03 (CONT)PRESERVATION, PACKAGING, PACKING AND MARKING8145 002609559 P069-3 } (QUP = 001)-----------------------------------------}8145 002609562 P069-4 } ICQ = 000)-----------------------------------------}8145 010124088 P069-6 }-----------------------------------------}8145 010140440 P069-5 }-----------------------------------------}8145 011644073 P069-7 }--------------------------------------------------------------------------8145 012622982 15450-1 } If MOP/PMT = GX-----------------------------------------} GX100K3GHFED8145 012622983 15450-2 } (QUP = 001)-----------------------------------------} (ICQ = 000)8145 012622984 15450-3 } For all other MOPs/PMTs-----------------------------------------} 51100EAGHFED8145 012622985 15450-4 } (QUP = 001)(ICQ = 000)-----------------------------------------}8145 012622986 15450-5 }-----------------------------------------}8145 012622987 15450-6 }-----------------------------------------}8145 012622988 15450-7 }--------------------------------------------------------------------------c. All excess empty reusable shipping and storage containers shall be turned-in to the nearest Container Reuse andRefurbishment Center (CRRC). CRRC locations/points of contact: Program Manager - 215-697-2063Norfolk, VA-757-445-9099 ext.124 Yokosuka, Japan-011-81-46-816-6304Cherry point, NC-252-466-2331 Lemoore, CA-559-998-0220Jacksonville, FL-904-542-1014 Okinawa, JAPAN-011-81-46-816-6304San Diego, CA-619-545-8360 Iwakuni, JAPAN-011-81-46-816-6304Puget Sound, WA-360-476-9777 Bahrain-011-318-439-9553d. The stock-numbered, long-life, reusable containers identified herein as GFM are property of the U.S. Navy andonly shall be used to fulfill orders from the Navy and U.S. Marine Corps; these containers shall not be used tofulfill orders from the U.S. Army, U.S. Air Force, any other agency of the U.S. Government or Foreign Military Sales(FMS) customer.9. REUSABLE NSN CONTAINERS FOR FOREIGN MILITARY SALES (FMS), JOINT PROGRAM OFFICE (JPO) OR OTHER FOREIGN FORCESACQUISITIONa. Reusable shipping and storage containers shall be provided as CONTRACTOR-FURNISHED MATERIAL (CFM), unlessotherwise specified.b. Contractors may tender offers including alternate, non-reusable, packaging methods and be consideredresponsive.10. HAZARDOUS MATERIALS. This section applies when items to be delivered under this contract are consideredhazardous materials as defined by 49 CFR, FED-STD-313, or by the Government's technical representative.a. Packaging and marking for hazardous materials shall comply with applicable requirements for PerformanceOriented Packaging (POP) contained in 49 CFR and the international modal regulations. All performance testrequirements shall be supported by test certificates and reports attesting to the date and the results obtained fromperformance oriented packaging testing. The contractor shall be responsible for assuring that sources providingperformance testing services are registered with the U.S. Department of Transportation (DOT). The contractor's signedcertification that the packaged configuration meets the applicable modal regulation shall be incorporated on the WideArea Workflow Receiving Report (WAWF RR), DD Form 250, Material Inspection and Receiving Report, or other relatedacceptance documents if a WAWF RR, DD Form 250 is not used. The Shipper's Declaration for Dangerous Goods (SDDG)must be included for all air shipments. All test certificates, reports and training records shall be available forinspection by authorized Government representatives for a period of three years.b. When a contract/order for hazardous material requires shipment to a military aerial port or through a militarycontainer consolidation point including DODAACs SW3225, SW3123, SW3142, N45627, FB4427, FB9150, FB4497, FY8910,FY9125, FB4418, FY4462, FB4484, FY4494, those shipments shall comply with NAVSUP PUB 505/AFMAN 24-204, PreparingHazardous Materials for Military Air Shipment.11. SAFETY DATA SHEETS. As required by clauses FAR 52.223-3 "Hazardous Material Identification and Material SafetyWSSTERMDZ03 (CONT)PRESERVATION, PACKAGING, PACKING AND MARKINGData" and DFARS 252.223-7001 "Hazard Warning Labels" the contractor/offeror is required to list any hazardousmaterial to be delivered under the resultant contract by the submission of Safety Data Sheets (SDSs) and GloballyHarmonized System (GHS) compliant product label, when applicable, to the NAVSUP WSS or DLA Contracting Officer priorto award. An electronic copy in PDF format of the SDS and GHS product label must also be emailed to NAVSUP WSS CodeN242 at hazmat.navsupwss@navy.mil. Please include the NSN, CAGE, Part Number, contract number, and point of contactfor hazardous material questions in the body of the email.12. REPACKAGING TO CORRECT PACKAGING DEFICIENCIESa. Notwithstanding inspection and acceptance by the Government of items furnished under this contract, or anycondition of this contract concerning the conclusiveness thereof, the contractor guarantees that the preservation,packaging, packing and marking (PPP&M), and the preparation of, and method of shipment of such items will conform tothe requirements of this contract.b. Items that do not conform to the PPP&M requirements of this contract may have a Supply Discrepancy Report(SDR, SF-364) written against the contractor.c. The Government may at the option of the PCO or ACO, correct PPP&M deficiencies, without prior contractornotification, and require an equitable adjustment in the contract price to cover labor and material when correctiveactions are warranted, or return the non-conforming material to the contractor for repackaging at the contractor'sexpense.(05-20)