PRINTING: Motor Vehicle Inspection Stickers

Bid Information Bid Alert No: 00001489107 Bid Title: PRINTING: Motor Vehicle Inspection Stickers Agency Bid No. Title: 0467-19 Received Date: 10/04/2018 Close Date: 10/09/2018 Purchase Type: Delivery must be received at NH Dept. of Safety by December 14, 2018 Delivery Point: New Hampshire Delivery Date: Not Stated Special Notices: Bidder Prequalification, Samples Required, Performance Bond Required: 100% Specifications Specifications include, but are not limited to:QUANTITY: 1) 10,000 booklets with 25 sticker pages per book, for a total of 250,000 sticker pages.Underrun may not exceed 0.5%. No overrun allowed.CONSTRUCTION: 1) Booklets will be 7-1/2" wide x 3 high; will consist of twenty-five (25) interior leavessandwiched between front and back cover leaves; and will be bound at the left side edge bytwo heavy duty staples. There shall be no binding tape of any type around the binding edge.2) Front and back cover leaves will be flat sheets of 100 lb. tag, size 7-1/2" wide x 3 high.

Front& back covers must both have a stub perforation. The front cover will be printed 1/1 in black.Each booklets front cover will be printed and numbered to indicate the range of serialnumbers contained in that booklet. The back cover will not be printed.3) Interior leaves shall be made entirely of white 60 lb. opaque vellum text paper, size 7-1/2"wide x 3 high, and will have two functionally distinct areas, as follows:A) On the left (refer to image of front side view on next page), a 4-1/2 x 3 inspectorsworksheet area. This will include the unprinted portion that is bound with staples. Therewill be no stub perforation, since the inspectors worksheet will remain always bound in thebooklet.B) On the right, a 3 x 3 inspection sticker, perforated for tear-off from the inspectorsworksheet. This sticker shall be made of the same paper as the inspectors worksheet, andwill be made into a sticker through the application of an adhesive transfer tape coveringexactly the 3 x 3 area of the sticker face (on the back side of the leaf). See images of theprevious years sticker on next page.STOCK: 1) Front and back covers: manila 100 lb. tag with 10% postconsumer waste content.2) Interior leaves: white 60 lb. opaque offset text, vellum finish, having 30% or morepostconsumer waste content, such as Cascades Rolland Opaque 50 vellum text.Additional duty requirements:A. Stock caliper before application of the adhesive transfer tape must be not less than.0047.B. Stock must readily accept all standard writing methods, including ball point pen, andmust allow all writing to easily become securely anchored and indelible and to remainlegible and free of smudging.C. Stock must work compatibly with the adhesive transfer tape to provide effectiveadhesion to the windshield, when correctly applied, for a service life of up to 24months on the windshield.D. Stock must be able to endure the year-round extremes of temperature, humidity andultraviolet light encountered during a service life of up to 24 months on an automobilewindshield, without yellowing, blistering or deteriorating significantly. Bid Related Documents Download Document Product Codes: 96690, 96689 Agency Information Issuing Agency: State of New Hampshire - Department of Administrative Services State: New Hampshire Agency Type: State and Local Contact: Daniel J. Ostroth, Bureau of Graphic Services Bureau of Graphic Services, 12 Hills Avenue, Concord, New Hampshire, 03301 Phone: 603-271-3205 Fax: 603-271-1949 Email: daniel.ostroth@nh.gov < PREVIOUS PAGE