Turning Center

06 December 2023 Turning Center Mid-Size CNC Lathe 06 December 2023 Open 12/6/2023 11:30 AM CST Type Invitation to Bid Close 12/13/2023 2:00 PM CST Number 28-EQUI-ITB-1435 Currency US Dollar Sealed Until 12/13/2023 2:00 PM CST Payment Terms 0% 0, Net 30 06 December 2023 Contacts Danielle Toler DANIELLE.TOLER@TAMU.EDU Phone +1 979-317-3841 06 December 2023 Commodity Codes None Added 06 December 202306 December 202306 December 202306 December 202306 December 202306 December 202306 December 202306 December 202306 December 2023 mailto:DANIELLE.TOLER@TAMU.EDU IFB for a Y-Axis Mid-Size CNC Lathe. No substitution of manufacturer will be accepted. Application requires exact items specified to ensure complete compatibility with project requirements. Description Required to View Event Prerequisites Required to Enter Bid 06 December 2023 1. Warranty- All items specified

within this document must be warranted against defective materials, workmanship and failures for a minimum of twelve (12) months after delivery and acceptance. Warranty includes all parts and labor. 2. Export Control- Vendor must notify Texas A&M if any products are export controlled. Items not indicated as such shall be considered and treated as non-controlled items. 3. Sole Source- No substitution of manufacturer will be accepted. Application requires exact items specified to ensure complete compatibility. 4. Federal Funding- All terms and conditions apply to this bid. Any resulting purchase order will be under a federal contract or grant administered by a state agency. 5. Shipping - FOB Destination Shipping to be FOB Destination: College Station, TX Shipping must be specified if not included in the item price(s). Shipping will not be allowed / approved if not specified in the bid response. 6. TEES T&C's- As a vendor responding to this invitation upon submission of your response, regardless of the format of your submission, you and the entity you represent are agreeing to the terms and conditions presented here as well as the TEES terms and conditions. 7. Best Value - In addition to low price, agency will consider best value, which includes the following: *quality, availability, and adaptability of materials, supplies, or equipment required *scope of conditions attached to bid *ability, capacity and skill of bidder *prompt service, goods delivered within time allowed *character, responsibility, reputation, and experience of bidder *quality of performance of previous service *financial stability *ability to provide future maintenance, repair parts, and service 06 December 202306 December 202306 December 202306 December 202306 December 202306 December 202306 December 2023 Buyer Attachments There are no Buyer Attachments added to this event. 06 December 202306 December 202306 December 202306 December 202306 December 202306 December 2023 Questions Required Questions Group 1: Instructions: 1.1 Are any of the items on this invitation for bid Export Controlled? 1.2 If export controlled, provide any ITAR Categories or ECCNs that apply. 1.3 Provide contact information (name, phone, e-mail) for a representative that can addressquestions on this bid response. 06 December 202306 December 202306 December 202306 December 202306 December 2023 Product Line Items Product Line Items 1. # Item Name, Commodity Code, Description Allow Alternates Qty. UOM Requested Delivery P1 Y-Axis Mid-Size CNC Lathe with A2-6 spindle nose and 3.0" (76mm) bar capacity 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Y-Axis Mid-Size CNC Lathe with A2-6 spindle nose and 3.0" (76mm) bar capacity P2 4500-rpm Spindle, 30 hp (22.4 kW), A2-6 spindle nose, 3.0" (76mm) bar capacity, belt drive 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 4500-rpm Spindle, 30 hp (22.4 kW), A2-6 spindle nose, 3.0" (76mm) bar capacity, belt drive P3 Belt-Type Chip Conveyor; quick, high-volume chip removal forincreased productivity. Discharges ch... 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Belt-Type Chip Conveyor; quick, high-volume chip removal forincreased productivity. Discharges chips at standard 55-gallonbarrel height. P4 Automatic Tool Presetter, manual and automatic modes.Userfriendlyinterface. 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Automatic Tool Presetter, manual and automatic modes. Userfriendlyinterface. P5 6000-rpm Sub-Spindle, A2-5 spindle Nose; for finishing the 2ndopside of the part. Includes part e... 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 6000-rpm Sub-Spindle, A2-5 spindle Nose; for finishing the 2ndopside of the part. Includes part ejector. Not compatible withthe VDI or BOT turret, or the tailstock option. Compatible withthe APL; however, the APL can only load/unload parts from thema P6 Parts Catcher System; rotates into position to catch a finishedpart as it is cut off; allows for ... 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Parts Catcher System; rotates into position to catch a finishedpart as it is cut off; allows for unattended machining. P7 Jet Air Blast, Sub-Spindle; keeps the workpiece and sub-spindleclear of chips, without having to ... 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Jet Air Blast, Sub-Spindle; keeps the workpiece and sub-spindleclear of chips, without having to open the operator door. P8 High-Pressure Coolant System, 300 psi (21 bar); provides highpressurecoolant directly through the... 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 High-Pressure Coolant System, 300 psi (21 bar); provides highpressurecoolant directly through the cutting tool. P9 Auto Jet Air Blast for the main spindle keeps the workpiece andworkholding clear of chips, withou... 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Auto Jet Air Blast for the main spindle keeps the workpiece andworkholding clear of chips, without having to open the operatordoor. NOTE: Main spindle only. P10 Internal High-Voltage Isolated Transformer for 380-480Voperation. 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Internal High-Voltage Isolated Transformer for 380-480Voperation. P11 Automate Your Lathe Part Production 1 EA - Each 23242300 - Lathes and turning centers | 5753 $5k, 8425 Automate Your Lathe Part Production P12 Shipping/Frieght/Rigging 1 EA - Each Shipping costs must be included in the prices listed above or here as a line item. If shipping charges are not included in your bid, they will not be paid. Shipping must include all applicable customs, duties and fees if there are any. 06 December 202306 December 202306 December 202306 December 2023 Service Line Items Service Line Items There are no Items added to this event. 06 December 202306 December 202306 December 2023