Solicitation Header Information Duration Dates Start DateOctober 18, 2018 at 4:00:00 PM CDT October 18, 2018 at 4:00:00 PM CDT End Date November 14, 2018 at 2:00:00 PM CST November 14, 2018 at 2:00:00 PM CST SolicitationRFPC30034901900673TitleDrilling Rig with Trade-In - Department of Natural ResourcesDelivery Terms Free On Board Destination Additional Delivery Information - Missouri Department of Natural Resources 111 Fairgrounds Rd. Rolla, MO. 65401 Description CONTRACT PERIOD: DATE OF AWARD THROUGH THREE (3) MONTHS Payment TermsNet 45 Days Additional Payment Information - Attn: Nona Lancaster Missouri Department of Natural Resources 111 Fairgrounds Rd. Rolla, MO. 65401 Solicitation Categories Drilling rigs (20111612) Solicitation Items No. Item Code/Name Manufacturer Name Manufacturer Part Number Delivery Address Desired Delivery Date Subtitutes Allowed? Multiple Alternative Proposals Allowed? Qty Unit 1 Option 1 - Truck-Mounted Drilling Rig
1.00 each Description: Replacement Drilling Rig Option 1 – Truck-Mounted Drill: Ability to auger 6-inch hole Ability to core bedrock Automatic SPT Hammer Tophead Drive High Speed/High Torque Head Main Winch Wireline Winch Lateral Hydraulic movement of table (in/out, right/left) (Wiggle-tail) At least 25,000 lbs. upward/20,000 lbs. downward thrust Hydraulically operated “slide-type” drill head 12-Volt Electric Start Highly Desirable Options: Truck and Drill Diesel Powered Drill: 2000 Model or newer Drill: Less than 4,000 Hours or Refurbished Truck: 100,000 miles or less Truck: 4-wheel drive At least 3 hydraulic leveling jacks Drillhead spindle capable of accepting all rod and casing up to “p” wireline and “H” casing Water Pump Air Swivel Mast of sufficient length to allow the use of up to 10-foot tooling Controls grouped together in a panel located at the rear of the machine and facing the rear NOTE: If vendor offers this option, the vendor must provide a driver for the delivery of the drilling rig who carries the appropriate driver’s classification to operate the replacement vehicle. See attached documentation for more details. 2 Option 2 - Track-Mounted Drilling Rig 1.00 each Description: Replacement Drilling Rig Option 2 – Track-Mounted Drill: Ability to auger 6-inch hole Ability to core bedrock Automatic SPT Hammer Tophead Drive High Speed/High Torque Head Main Winch Wireline Winch Lateral Hydraulic movement of table (in/out, right/left) (Wiggle-tail) At least 25,000 lbs. upward/20,000 lbs. downward thrust Hydraulically operated “slide-type” drill head 12-Volt Electric Start Highly Desirable Options: Diesel Powered 2000 Model or newer Less than 4,000 hours or refurbished Drill and Tracks use the same power source At least 3 hydraulic leveling jacks Drillhead spindle capable of accepting all rod and casing up to “p” wireline and “H” casing Water Pump Air Swivel Mast of sufficient length to allow the use of up to 10-foot tooling Controls grouped together in a panel located at the rear of the machine and facing the rear Rubber Tracks See attached documentation for more details. 3 Trade-In Only (Credit) 1.00 each Description: Line Item 3: Drilling Rig & Equipment Trade-In: Code: 20111612 Drilling Rigs Total Trade-In Drilling Rigs and Equipment Credit: $____________/TOTAL See Attachment 2 for details of Trade-In Drilling Rigs & Equipment and pictures. Drilling Rigs & Equipment Estimated Value: Vendor’s Credit Offer: 2010 Peterbilt 340 Tandom Axle Diesel Truck with 2009 Simco 7000 Geotech Drill $ __________ $ __________ Geoprobe Model 540U $ $ 2000 Simco 4000 TR-2 $ $ Ingersoll-Rand 600 CFM 150 psi Air Compressor with Cummins Engine $ __________ $ __________ Equipment with 2009 Simco 7000 Geotech Drill: 8 inch bit attached to 8 inch DTH hammer 8 inch Stabilizer 580 ft. of 20’ x 4.5” O.D x 337w IRT4 Drill Rod 1-10’ x 4.5” O.D x 337w IRT4 Drill Rod New 10 inch bit to be used with 8 inch DTH hammer Miscellaneous Tooling specific to drill Includes: 6 inch, 8 inch (new), and 10 inch (new) drag bits; hoisting plug, 3-subs, fork wrench, 2-saddles, and auger guide $ __________ $ __________ See attached documentation for more details.
Location
Address: 301 West High Street, Room 630 Jefferson City MO, 65101 United States