Bid Information Bid Alert No: 00001308247 Bid Title: Underground Fuel Storage Tank Agency Bid No. Title: 185-18 Received Date: 04/19/2018 Close Date: 05/01/2018 Purchase Type: Not Stated Delivery Point: Not Stated, New Hampshire Delivery Date: Not Stated Special Notices: Questions Due By 04/25/2018 Specifications Specifications include, but are not limited to: Remove and replace existing 50 Gallon Fuel storage tank to include the following;1. Empty existing tank reserving fuel (temporary storage to be provided be the vendor)2. Remove and dispose of existing tank and materials following all governing state and federalrequirements for recycling.3. Install a new Pryco PY50ULDW (or Equivalent) with the following minimum specifications;a. 50 Gallon Capacity UL Listed Double-Walled Tankb. One (1) 4 GPM ductile iron supply pump with 1/3 hp., 115 vac motor.c. One (1) 8 GPM ductile iron Return pump with hp., 115 vac motor.d. Alarms to include: High/Low fuel levels, critical high level, and
interstitial leake. Alarm horn for leak and critical high alarms with silence switchf. Alarm relay for remote signal of leak or critical high alarmsg. Pump motor shutdown at critical high levelh. One (1) inch N/O stainless steel solenoid valve for normal filli. One (1) inch N/O stainless steel solenoid valve for critical high level shut downj. One (1) 1 inch stainless steel ball check valve for return linek. NEMA-1 Enclosure for control panell. Install 2 inch atmospheric vents using schedule 40 galvanized pipe. Each vent will go to theoutdoors directly adjacent to the day tank and terminate at approximately 5 feet above grade.m. 2 inch updraft vent caps are to be usedn. Original fuel is to be placed into the new tank upon completion of testingReplace the supply and return hoses at the day tank to include;1. Drain and remove the existing fuel hoses. Hoses to be disposed of by the vendor in accordance withall state and federal regulations2. Install new inch schedule 40 iron pipe with malleable iron threaded fittings in place of the hose3. Install inch stainless steel ball valves on each line. 2 Total valves4. Install one (1) stainless steel anti-siphon valve with stainless steel priming tee Bid Related Documents Download Document Product Code: 96878 Agency Information Issuing Agency: State of New Hampshire - Department of Administrative Services State: New Hampshire Agency Type: State and Local Contact: Mathew Stanton 25 Capitol Street, Concord, New Hampshire, 03301 Phone: 603-271-3235 Fax: 603-271-7564 Email: prchweb@nh.gov < PREVIOUS PAGE