DEFENSE ADVANCED GPS RECEIVER (DAGR) ACCESSORIES, ONLY

DESCRIPTIONThe U.S. Army Communications- Electronics Command (CECOM) Security Assistance Management Directorate (SAMD) has a requirement for BAE Systems, Inc. (herein after "BAE") Defense Advanced GPS Receiver (DAGR) accessories and training, ONLY.The Air Force (AF) is the agency of record for DAGR units and/ or systems. CECOM SAMD can use the AF [contract] to order DAGR units, yet cannot use the AF contract to order accessories or training. Therefore, CECOM SAMD requires a stand-alone contract vehicle to order DAGR accessories and training, ONLY (not the DAGR device, itself).Army Contracting Command- Aberdeen Proving Ground (ACC-APG) is issuing this Sources Sought synopsis to identify parties with an interest in (and the resources to) provide DAGR accessories produced by BAE. U.S. Government commerce and regulatory authorities directed Collins Aerospace divest DAGR product line(s); BAE purchased the divested DAGR product line(s). Therefore, ACC-APG intends to award an

Indefinite-Delivery Indefinite-Quantity (IDIQ) contract to BAE for DAGR accessories and training, ONLY (to exclude the DAGR device, itself). Award is proposed on the sole-source basis, such that only BAE can provide DAGR accessories when total form/ fit/ function compatibility with ex-Collins product(s) is/ are required. This Sources-Sought announcement seeks alternative providers able to supply accessories that are form/ fit/ function compatible with DAGR devices, such as cables, antennas, and batteries. Also required are operator and unit level maintenance training services for DAGR at world-wide outside the continental United States (OCONUS) locations.TECHNICALNote: CECOM SAMD does not possess design details or technical data package(s) for the required DAGR accessories and items, as follows. All accessories listed below are compatible with DAGR NSN 822-1873-001 and 822-1873-002.MOUNTS AND CASES- DAGR Installation Mount Part Number (P/N): 987-5006-001 (NSN 5975-01-521-3063)Used to install the DAGR in a host platform; Secures DAGR with metal spring loaded plungers; Clearance provided for data, antenna and power cables; Key fill port accessible while in mount if keyfill adapter bracket and cable are installed; see accessories below for part numbers. The DAGR installation mount adapter (P/N: 987-5007-001) is required if additional clearance is required from the host platform.- DAGR Installation Mount Adapter P/N: 987-5007-001 (NSN 5340-01-521-4394)The installation mount adapter can replace the bracket on the back of the installation mount in those installations that require an approximate 1 and 1/2 " additional clearance from the host platform; Use this adapter in conjunction with the DAGR installation mount (P/N: 987-5006-001)- Helmet Antenna Mount P/N: 013-1928-020 (NSN 5825-01-469-6033)Green nylon pouch holds the RA-1 antenna (013-1981-010) to a helmet; Elastic straps and metal clips fasten to rim of helmet.- DAGR Cartridge/Trouser Belt Adapter P/N: 987-4970-001 (NSN 8465-01-522-5638)Attaches to the DAGR for mounting the unit to a cartridge/trouser belt DAGR Personnel Case 987-5010-001 (NSN 5895-01-521-3111); Green, non-rigid, nylon bag; Adjustable shoulder strap; Two (2) web belt clips; Pockets to hold DAGR accessories, such as: spare battery magazine, DAGR-to-DAGR cable and quick reference guide.- DAGR Flip Down Personnel Case P/N: 021-0801-010/020/030 (NSN TBA)Digital camo (-010), coyote (-020) and green (-030); MOLLE compatible; Flips open and fastens when not open; Easy access to connector ports; DAGR not included.- Keyfill Cable Adapter Bracket Kit 987-6323-001 (NSN 5935-01-521-3067)The keyfill cable adapter bracket is used along with the DAGR Installation mount for securing either the crypto keyfill cable or the PLGR/ SINGARS cable adapter; Used in conjunction with the DAGR installation mount adapter (987-5007-001) and the crypto keyfill cable (987-5180-001).- Clamp, Loop-Hole P/N: 987-7676-001 (NSN TBA)Clamps onto azimuth determination system pole to mount the installation mount (987-5006-001).- Case, Azimuth Determination System P/N: 021-0716-030 (NSN 5895-01-549-8450)Case is intended for use with the azimuth determination system (987-6280-002); case is pressurized and has cut-outs inside for all equipment.EXTERNAL ANTENNAS- RA-1 Magnetic Mount Remote Antenna P/N: 013-1981-010 (NSN 5985-01-502-6692)Antenna for tracking L1 & L2 signals, magnetic or hard mounted with SMA connector; also functions as the helmet antenna; Magnet rated to 70 miles per hour RA-2 Remote Antenna 013-1981-020 (NSN 5985-01-521-1775) ; Antenna for tracking L1 & L2 signals;  Hard mount with four bolt mounting; Bottom mount TNC (F) connector; O-ring included- Azimuth Determination Survey Grade Antenna P/N: 013-1962-040 (NSN 5985-01-550-0960)Survey grade antenna for tracking L1 & L2 signals, with TNC connector; 3.3 VDC; TNC connector (F) ; Pole not included with antennaCABLES- DAGR to RA-1 Cable (5m with SMA connector) P/N: 987-4640-001 (NSN 5995-01-504-1762)Use with remote antenna with SMA connector (RA-1) ; The DAGR to RA-1 cable provides for connection between the DAGR and a RA-1 antenna; SMA plug (M) connector; Right angle SMA plug (M) ; 5 meters- DAGR to RA-1 Cable (10m with SMA connector) P/N: 987-5016-001 (NSN 5995-01-521-4244)Use with remote antenna with SMA connector (RA-1) ; The DAGR to RA-1 cable provides for connection between the DAGR and a  RA-1 antenna; SMA plug (M) connector; Right angle SMA plug (M); 10 meters- DAGR to RA-2 Cable (10m with TNC connector) P/N: 987-5015-001 (NSN 5995-01-521-2941)Use with remote antenna (RA-2) with TNC (M) connector; TNC plug (M) and right angle SMA plug (M); 10 meters.- DAGR to Helmet Antenna Cable P/N: 987-7002-001 (NSN 5995-01-521-6753)The DAGR/helmet antenna cable provides for connection between the DAGR and the RA-1 helmet antenna; Two right angle SMA plugs (M); Breakaway feature; 1.5 meters.- DAGR to DAGR/PLGR Cable P/N: 987-5011-001 (NSN 5995-01-521-2713)The DAGR/DAGR/PLGR cable provides for connection between two DAGRs or between a DAGR and a PLGR; 15-pin D-sub plug (F) ; 15-pin D-sub plug (F) ; 1 meter; Transfer data includes: setup, waypoints, routes, alerts, time, satellite data, position data and maps, Field reprogrammability of receiver application software.- DAGR to PC Cable P/N: 987-5012-001 (NSN 5995-01-521-3198)The DAGR-to-PC cable provides for connection between a DAGR and a PC; 15-pin D-sub plug (F); 9-pin D-sub plug (F); 3 metersvField reprogrammability of application software; Ability to load maps from a PC.- J1/COM 3 to PC Cable P/N: 426-0231-010The J1/COM 3-to-PC cable provides for connection between COM 3 and a PC serial port; 15-pin D-sub plug (F); 9-pin D-sub plug (F); 3 meters.- Cold Weather Battery Pack Cable P/N: 426-0227-010 (NSN 5995-01-533-3421)Cold Weather Battery Pack (CWBP) cable is an external power cable that interfaces the CWBP to the DAGR; 3-pin power plug (F) ; P1; 3-pin power plug (M) ; P2; 2 meters.- DAGR to SINCGARS Cable P/N: 987-5014-001 (NSN 5995-01-521-3187)The DAGR-to-SINCGARS cable provides for connection between the DAGR and a SINCGARS radio. Provides for SINCGARS time fill data input to a SINCGARS compatible device; 15-pin D-sub plug (F) ; 6-pin audio jack; 3 meters.- DAGR to Have Quick Cable P/N: 987-5002-001 (NSN 5995-01-521-2680)Provides for data output to a HAVEQUICK compatible device; The HAVEQUICK end of the cable has stripped and tinned wires; 15-pin D-sub plug (F) ; 3 meters.- Crypto Keyfill Cable P/N: 987-5180-001 (NSN 5995-01-521-3185)The crypto fill cable provides for connection between the DAGR and the KYK-13, KOI-18 and AN/CYZ-10; 15-pin D-sub plug (F); 6-pin audio plug; 13 inches.- Adapter Cable PLGR/ SINCGARS P/N: 987-5013-001 (NSN 5995-01-521-3182)The adapter cable PLGR/SINCGARS provides for connection between the DAGR and a PLGR SINCGARS cable; 15-pin D-sub (F) ; 6-pin audio plug; 10 inches with yellow label.- PLGR Adapter Cable-External Antenna P/N: 987-5017-001 (NSN 5995-01-521-3120)The PLGR cable adapter remote antenna provides for connection between the DAGR and a PLGR RA cable; SMA right angle plug (M) ; D-sub receptacle with RF (F) ; 8 inches.- RS-422 to USB Converter Cable P/N: 426-0228-010 (NSN 5995-01-531-5118)The RS-422-to-USB high speed data cable converts data from USB to RS-422 for accelerated loading of the maps functionality.- Adapter Cable, Bradley Vehicle Data P/N: 987-5182-001 (NSN 5995-01-521-3071)The Bradley adapter cable provides an extension of the DAGR J2 connector; 15-pin D-sub (F) to 15-pin D-sub (M); 13 inches.- Spinner P/N: 988-9389-001 (NSN 5935-01-534-6963)Extra spinners can be purchased for use on the RF SMA connectors; this spinner provides easy installation and removal of the RF connector.- DAGR-to-Survey Antenna Cable (9.5 inches with TNC connector) P/N: 987-5015-002 (NSN 5995-01-549-8449)For use with survey antenna (013-1962-040) ; TNC plug (M) and right angle SMA plug (M); 9.5 inches.- DAGR-to-Survey Antenna Cable (19 inches with TNC connector) P/N: 987-5015-003 (NSN TBA)For use with survey antenna (013-1962-040) TNC plug (M) and right angle SMA plug (M); 19 inches.- Quick Disconnect Cable P/N: 988-7042-002 (NSN 5995-01-549-8447)The DAGR/DAGR/PLGR cable provides for connection between two DAGRs or between a DAGR and a PLGR; 15-pin D-sub plug (F) ; 4-pin circular socket (F) ; 20 inches; Transfer data includes: setup, waypoints, routes, alerts, time, satellite data, position data and maps; Intended use with azimuth determination system (987-6280-002).- Quick Disconnect Cable P/N:988-7043-002 (NSN 5995-01-549-8451)The DAGR/DAGR/PLGR cable provides for connection between two DAGRs or between a DAGR and a PLGR; 15-pin D-sub plug (F) ; 4-pin circular plug (M) ; 40 inches; Transfer data includes: setup, waypoints, routes, alerts, time, satellite data, position data and maps;  Intended use with azimuth determination system (987-6280-002).POWER OPTIONS- DAGR External Power Cable Fused (5m) P/N: 987-5019-001 (NSN 6150-01-521-6757)Use to connect a DAGR to an external power source; DAGR connection can be secured to prevent inadvertent removal;  Lugs installed on source end of cable; 3-pin power plug (F) In-line fuse holder installed; 5 meters.- DAGR Cigarette Lighter Power Cable P/N: 987-5008-001 (NSN 6150-01-521-2548)The cigarette lighter power adapter provides for connection between a DAGR and a cigarette lighter; DAGR connection can be secured to prevent inadvertent removal; 3-pin power plug (F); In-line fuse protected; Coiled cord.- DAGR AC Power Adapter P/N: 987-4975-001 (NSN 6130-01-521-3157)Connects the DAGR to an AC power source; Compatible voltage: 110 to 240 volts; Two prong, North American style plug; -pin power plug (F) ; Operates on 50 or 60 Hz; 3 meter cord.- DAGR External Power Cable, Fused (2 m) P/N: 987-5009-001 (NSN 6150-01-521-6755)The DAGR-to-external power cable, fused provides for connection between a DAGR and an external power source; 3-pin power plug (F) 2 meters.- Adapter Cable PLGR External Power P/N: 987-5020-001 (NSN 6150-01-521-3510)The cable adapter PLGR external power provides for connection between a DAGR and a PLGR external power cable; Right angle plug (M) ; 3-pin power plug (F) ; 8 inches- DAGR Memory Battery Primary: LS14250 Alternate: 221-0500-030 (NSN 6135-01-435-4921)Used to maintain memory circuits when prime power has been removed; ½ AA; 3.6 VDC lithium cell- Spare Prime Power Battery Magazine P/N: 987-6641-001 (NSN 6135-01-521-3064)Spare prime power battery magazine is interchangeable with the prime power magazine that is provided with the DAGR; 4-AA cells, 1.5 VDC- Cold Weather Battery Pack P/N: 987-7050-001 (NSN 6130-01-530-4652)Cold Weather Battery Pack (CWBP) is an external power supply designed for extended use with a DAGR when batteries are the only practical means for power; 8-AA cells (consisting of two 987- 6641-001), 1.5 Vdc; 3-pin power plug (F) on pendant cable; 1 amp fuse; CWBP requires two spare prime power battery magazines (987-6641-001) that are sold separately.ACCESSORY KITS- Kit, Sub-MIL Azimuth Determination (AD) Dual DAGR Receiver P/N: 987-6280-002 (NSN 5985-01-549-7219)The sub-mil AD accessory kit is used to increase accuracy over the AD method of calculating the azimuth; Antennas, antenna cables, quick disconnect DAGR-to-DAGR cable and case is included.- Kit, Azimuth Determination Single DAGR Receiver P/N: 987-6279-002 (NSN N/A)The AD single receiver kit is used inthe calculation of the azimuthInstallation mount, pole clamp for installation mount, antenna, antenna cable and bag are included BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES (IN FULL OR IN PART) OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. All Small Business Set-Aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.PLACE OF PERFORMANCEHardware - BAE or interested vendors shall not deliver hardware. Inspection and Acceptance (I&A) will be at "origin" to cognizant DCMA office (vendor shall submit a request through the Government Shipping Instruction Request (SIR) site, and DCMA will coordinate delivery to a freight- forwarder).Training Services - 60% European, 30% Middle Eastern, 20% "other" countries DISCLAIMERTHIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A “REQUEST FOR PROPOSAL (RFP)”, DOES NOT CONSTITUTE A SOLICITATION, AND SHALL NOT BE CONSTRUED AS A GOVERNMENT COMMITMENT FOR THE REQUIREMENTS DESCRIBED ABOVE. RESPONSES IN ANY FORM ARE NOT OFFERS, AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS IS STRICTLY VOLUNTARY, AND RESPONSES WILL NOT BE RETURNED. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY IS/ ARE ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT - WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMMATION PERTAINING TO THIS REQUIREMENT.PROGRAM BACKGROUNDCECOM SAMD is designated the implementing agency’s executive for this FMS effort. In accordance with the assignment(s), CECOM SAMD provides the following:  If your company has the potential capacity to provide the hardware and perform the training services described above, please provide the following information: 1) Organization name, address(es), email address(es), Web site address(es), telephone number(,) and size and type of ownership for the organization; and 2) capability statements addressing the particulars of this effort. If significant subcontracting or teaming is anticipated (in order to deliver technical capability), organizations should address the administrative and management structure of such arrangements.ELIGIBILITYThe applicable NAICS code for this requirement is 334511 - "Search, Detection, Navigation Instrument Manufacturing". Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement.Interested parties will submit a capabilities statement of no more than three (3) pages in length, in Times New Roman font of not less than 10 pitch. Additional material(s0 without limit may be provided in the form of specification sheets, items descriptions, and product presentations. The deadline for response(s) to this request is no later than 3 pm, EST on 4 September 2020. All responses under this Sources Sought Notice must be e-mailed to ANDREW MITCHELL, Contract Specialist with ACC- APG, Division D- Branch E, via email address: Andrew.C.Mitchell1.civ@mail.mil.Documentation must address the following, at a minimum:1.) What type of work has your company performed in the past in support of the same or similar requirement?2.) Can your company, or has your company managed a task of this nature? If so, provide details.3.) What specific technical skills does your company possess which ensure the capabilities to perform tasks?4.) Please note that under a Small-Business Set-Aside the small business prime must perform at least 50% of the work themselves (in terms of the cost of performance: see Federal Acquisition Regulation (FAR) 52.219-14). Provide an explanation of your company’s ability to perform at least 50% of the tasks described.5.) Provide a statement including current small/ large business status and company profile, to include number of employees, annual revenue history, office locations, CAGE code, DUNs number, etc..6.) Respondents to this notice also must indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service Disabled Veteran-Owned Small Business Concern.If the Government determines that this requirement will be an unrestricted competition, ACC- APG intends to evaluate Small-Business responses and conduct further market research to identify a subcontracting goal.Your response to this Sources Sought, including any capabilities statement(s), shall be electronically submitted to Contract Specialist ANDREW MITCHELL via email address: Andrew.C.Mitchell1.civ@mail.mil, in either Microsoft Word or Portable Document Format (.pdf).All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. No phone calls will be accepted.All questions must be submitted to the contract specialist identified above. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought.