PANEL, DOOR, ENTRANCE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 5 OF 22 PAGES SPE4A7-24-T-1907 SECTION A Procurement History for NSN/FSC:002458783/1560 CAGE Contract Number Quantity Unit Cost AWD Date Surplus Material . 3P104 SP047002D5A61003Z 10.000 1509.10000 20030516 N 3P104 SP047002D5A61002Z 15.000 1291.70000 20021018 N 3P104 SP047002D5A61001Z 9.000 1509.10000 20020903 N 3P104 SP047000MS484 14.000 1139.10000 19991228 N 17772 DLA40092MD263 15.000 482.39000 19920319 N 98897 F0460684G1042YQ22 15.000 396.50000 19850205 N 98897 N0038382G25021133 12.000 373.01000 19830930 N 98897 N0038382G25020863 13.000 335.52000 19830711 N This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous

United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at: http://www.dla.mil/FDTPI/ CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 6 OF 22 PAGES SPE4A7-24-T-1907 SECTION B PR: 7005037684 NSN/MATERIAL:1560002458783 ITEM DESCRIPTION PANEL,DOOR,ENTRANCE PANEL, DOOR, ENTRANCE RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY LOCKHEED MARTIN CORPORATION CAGE 98897 P/N 951094-105 EXCEPTION: MAT'L NOTE; NOREL NO LONGER AVAILABLE USE UNIROYAL "ROYALITE R-60" OR GENERAL TIRE "BOLTARON 6800" I/A/W LOCKHEED SPEC C-22-1098B WILLIAMS AEROSPACE & MANUFACTURING INC. 3P104 P/N 951094-105 LOCKHEED MARTIN CORP 98897 P/N 951094-105 AERO ENGINEERING & MANUFACTURING 17772 P/N 951094-105 CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE . 0001 7005037684 0001 EA 3.000 CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: CONTINUED ON NEXT PAGE PAGE 7 OF 22 PAGES SPE4A7-24-T-1907 SECTION B PR: 7005037684 PRLI: 0001 CONT’D NSN/MATERIAL:1560002458783 DELIVERY (IN DAYS):0169 DELIVER FOB: ORIGIN QTY VARIANCE: PLUS 0% MINUS 0% INSPECTION POINT: DESTINATION ACCEPTANCE POINT: DESTINATION PREP FOR DELIVERY: PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951. All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PARCEL POST ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT FREIGHT SHIPPING ADDRESS: W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD REC WHSE 57 TRACY CA 95304-5000 US Need Ship Date:04/21/2024 Original Required Delivery Date:01/06/2025 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 22 PAGES CONTINUED ON NEXT PAGE SPE4A7-24-T-1907