Liquid Oxygen Storage Tank Purging Unit (New)

Added:May 03, 2019 12:29 amRequirementsLiquid Oxygen Storage Tank Purging Unit (New)PCI Gases P/N 791070-003 or equivalent.Shall meet or exceed these equivalent characteristics:Weight: Not to exceed 1850lbsOperating Temp: -65F to 130FDischarge temp: 350F Normal to 400F MaxDischarge pressure: 5PSIG, 8PSIG MaxBlower inlet flow: 90CFM AT 5PSIGOperating Voltage: 440V/220V, 3 Phase, 60 CycleServicing Hose Length: 6-10ft w/ 1.5 in. I.D.Motor: 5hp - 440V/4.5amps - 220V/9ampsHeater: 12kw - 440V/21amps - 220V/27ampsShall include following (or equivalent) accessories: (PCI PN/Nomenclature/QTY) -FH47 - Strip, Heater Overload - 3791116-001 - Fitting Assy, Discharge - 1791097-001 - Wire Assy, Jumper Motor 220V - 1791084-001 - Elbow Assy, Swivel - 1791086-001 - Adapter, Swivel 1 in. Pipe - 1791119-001 - Adapter, Swivel 1.5 in. Pipe - 1791121-001 - Adapter, Swivel 2 in. Pipe -1790908-001 - Valve Assembly, Vent, Hot Air - 1791144-001 - Wire Assy, Jumper, Motor 220VNote: The Kit Accessories are used to convert to/from 220 volts (V) to 440V, measure outputtemperatures and has adapters for various oxygen tank hookups being purged.SHIPPING INFORMATION:Contractor will be responsible for shipping to Defense Logistics Agency (DLA) - San Joaquin in Tracey,CA (Shipping address is located in Deliveries or Performance section)DLA - San Joaquin will forward the unit to Okinawa, Japan.Final shipping information will be sent to after award of